Topic: Garlicoin Physical Storage [Free template] - Garlicard (Read 275 times)
lovely, Would love to buy them.
Hey,
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
https://i.imgur.com/YUzddbI.jpg
Download link:
https://ufile.io/4gbwn
Thanks
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
https://i.imgur.com/YUzddbI.jpg
Download link:
https://ufile.io/4gbwn
Thanks
Also, I'll have you know, I'm a part of the Garlicoin Team now. So this does have GRLC developer approval
Hey,
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
https://i.imgur.com/YUzddbI.jpg
Download link:
https://ufile.io/4gbwn
Thanks
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
https://i.imgur.com/YUzddbI.jpg
Download link:
https://ufile.io/4gbwn
Thanks
HOLY SHIT. With your permission I will make these available to the entire GRLC community and this community. I absolutely LOVE these! Please contact me on Discord here: Kmorae#6969 or https://discord.gg/XxAefD
legendary
Activity: 2520
Merit: 3238
The Stone the masons rejected was the cornerstone.
Very nice. Would love to buy em if and when available
These are neat AT101ET, thanks for sharing! I'm wondering if anyone on this forum has a card printer that would be willing to make a few without the QR codes, as is?
No problem at all. Better that someone uses it than no one at all.
If there is anyone on here then I’d like to get a few myself. I’d be prepared to pay too for a few (the companies here in the UK have minimum orders of 250 and although they only come to (about) $2.5 each its beyond what I need myself
These are neat AT101ET, thanks for sharing! I'm wondering if anyone on this forum has a card printer that would be willing to make a few without the QR codes, as is?
Very cool and thanks for sharing! Now..if only if I could find some to buy!
Hey,
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
Download link:
https://ufile.io/4gbwn
Thanks
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
Download link:
https://ufile.io/4gbwn
Thanks
Awesome. Design looks well made making the card look quite attractive to get a hold of. As such, I love the design and will use it for my future GRLC wallets. This would go great for some PVC wallet cards for Garlicoin.
Nonetheless, keep up the good work!
Hey,
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
Download link:
https://ufile.io/4gbwn
Thanks
I was working on a form of physical storage for Garlicoin following its release, but seeing as I don't have the time to continue to pursue it, I feel like sharing it here is the only right thing to do.
Due to the nature of the card (small detail/print), some standard printers won't be able to bring out all the card details but there are some that might (I've been told that the higher end ID card printers would).
I opted to go for a small denomination of GRLC but feel free to change it as you please. (I have attached a download link to the ai file below).
I feel like its a shame to let this go unused so low and behold, I present to you all... The Garlicard!
The inner lines on the reverse and obverse are meant to serve as guides for the key placement (private and public) whilst the outer lines/borders are meant to help the placement of a scratch off panel and clear plastic sticker for the public key/QR code. There is a standard square hologram scratch off panel available cheaply online that fits the card well.
Feel free to post any questions, hate, love or both.
If anyone does go about making some of these for themselves then I'd love to see a picture or two (the ones I printed didn't come out 100%).
Here's a mockup for reference.
Download link:
https://ufile.io/4gbwn
Thanks
Jump to: