Topic: GAUGING INTEREST: Mass-Produced 3D Printed Physical Bitcoin (Read 1346 times)
There are currently commerical physical coin, it will be hard for a 3d printed coin to compete.
I guess 20$ is little bit expensive , maybe 15$ ? If it's really beautiful and creative then people may pay whatever it takes to get it .
also I just found you this link : https://grabcad.com/library/bitcoin-1 (you have register to get the file I assume) also look oat the right there is "simillar models"
Good luck ! pls show us the result once you do it .
also I just found you this link : https://grabcad.com/library/bitcoin-1 (you have register to get the file I assume) also look oat the right there is "simillar models"
Good luck ! pls show us the result once you do it . 
Would $20 be a good enough sale price?
Considering:
Considering:
- around $46 per spool of plastic
- around 2 hours taken to print
- specific environment to print
Well , have you find a good design or you are going to use the one that I provided ? I was able to see how it looks like and it's pretty simple and dosen't contain anything at all . just a 3D model
I might make one for myself
Would $20 be a good enough sale price?
Considering:
Considering:
- around $46 per spool of plastic
- around 2 hours taken to print
- specific environment to print
Well , have you find a good design or you are going to use the one that I provided ? I was able to see how it looks like and it's pretty simple and dosen't contain anything at all . just a 3D model
Would $20 be a good enough sale price?
Considering:
Considering:
- around $46 per spool of plastic
- around 2 hours taken to print
- specific environment to print
3D printers should read STL format as far as I know , here you go this design : http://www.mediafire.com/download/cl9buxmn03iu787/bitcoin.stl [Source : https://bitcointalksearch.org/topic/ive-created-a-basic-stl-file-of-a-bitcoin-3d-printable-352556 ]
I'am not sure how it looks like but I guess you could try and give it a shoot , if you print it please share with us the results on the topic with a screenshot
I'am not sure how it looks like but I guess you could try and give it a shoot , if you print it please share with us the results on the topic with a screenshot
That's a nice and simple design, no overhangs for the benefit of those with FFF machines that don't have water-soluble supports or second extruders. There were some mesh issues, but nothing Slic3r couldn't handle. I can't actually print it for a while, but it looks like a fair design. At low density, could be a cheap trinket to give out to raise awareness at events.
I'd be interested depending on the price, though I recon it would be cheaper than a silver coin of similar size, right?
Cool idea for sure, I think there would be interest in something like this.
Cool idea for sure, I think there would be interest in something like this.
3D printers should read STL format as far as I know , here you go this design : http://www.mediafire.com/download/cl9buxmn03iu787/bitcoin.stl [Source : https://bitcointalksearch.org/topic/ive-created-a-basic-stl-file-of-a-bitcoin-3d-printable-352556 ]
I'am not sure how it looks like but I guess you could try and give it a shoot , if you print it please share with us the results on the topic with a screenshot
I'am not sure how it looks like but I guess you could try and give it a shoot , if you print it please share with us the results on the topic with a screenshot
I have an access to a 3D printer and I was thinking of making a 3D printed Bitcoin.
Wanted to know from the community what you would like on it, and what design
I could use. Or I could accept designs and 3D Print it for them.
Feel free to post here any ideas or comments
Regards,
JM Erestain
Wanted to know from the community what you would like on it, and what design
I could use. Or I could accept designs and 3D Print it for them.
Feel free to post here any ideas or comments
Regards,
JM Erestain
Jump to: