You’ll be needing this thread then:-
https://bitcointalksearch.org/topic/gekkoscience-2paccompac-bm1384-stickminer-official-support-thread-1764803
Topic: gekko sticks keeps going into zombie mode. how to fix? (Read 420 times)
it is the 2 pac, yes powered usb hub
Which sticks?
There 2 different ones, the original 1-chip COMPAC and the newer 2-chip 2PAC.
Both have their own dedicated threads in the Hardware area. Use them for answers.
There 2 different ones, the original 1-chip COMPAC and the newer 2-chip 2PAC.
Both have their own dedicated threads in the Hardware area. Use them for answers.
There is a dedicated thread for these sticks:-
https://bitcointalksearch.org/topic/gekkoscience-compac-bm1384-stickminer-official-support-thread-1173963
Have a good read through it. Also if you have a problem its best to give as mich detail as possible. What system its being used on, what type of usb port, powered or non-powered, what mining software are you using etc etc
https://bitcointalksearch.org/topic/gekkoscience-compac-bm1384-stickminer-official-support-thread-1173963
Have a good read through it. Also if you have a problem its best to give as mich detail as possible. What system its being used on, what type of usb port, powered or non-powered, what mining software are you using etc etc
I really don't recommend overclocking these, they aren't that good at being overclocked. Have you tried overvolting it?
I do receive quite some HW errors above 140MHz but not really that much issues about it going Zombie. Are you using a powered USB hub?
I do receive quite some HW errors above 140MHz but not really that much issues about it going Zombie. Are you using a powered USB hub?
it is at 150 then i dropped to 130 and it is still going into zombie mode when i come back...
how to fix this?
how to fix this?
Jump to: