GekkoScience Compac USB [ missing zlib1.dll ]

gt_addict

hero member

Activity: 2534

Merit: 623

Quote from: LukeTheMiner on May 02, 2016, 04:09:02 PM

Hey, its working great- a strong 6.9 Gh/s for the moment! I really appriceate the walk through- i was getting burned out digging through all the pages. Hopefully this thread will help someone else out later.

Ps- Have you bothered with the 'tweaking' process?

Yea mines running 275m and getting 15.1ghs at the moment. Not going to push her any further until I get another heatsink on the back and a different power source for one of the usb splitter leads as shes hooked upto a powered hub (dlink 7port) which can only handle 2.5A. Once that's all done im going to try 300m Shocked

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: gt_addict on May 02, 2016, 03:58:22 PM

No worries. Yea let us know if it works. Bare in mind the gekkos can be a bit temperamental to get started. Just unplug and plug them in again if needed. Sometimes I have to do it multiple times before she gets going on her own Wink

This is not really true they are very reliable as far as usb miners go. The initial start temperamental is likely people in windows playing with Zadig, it is a pain on some machines. Zadig for some Windows machines will install first try and work great, others will have multiple attempts and still not work proper.

If you want "easy" way to make sure it works switch over to Linux, maybe a RPI even. It just works much better due to not needing Zadig.

Mikestang

legendary

Activity: 1274

Merit: 1000

Did you see the official support thread? All of this and much more is covered there (this issue in particular several times).

https://bitcointalksearch.org/topic/gekkoscience-compac-bm1384-stickminer-official-support-thread-1173963

LukeTheMiner

newbie

Activity: 17

Merit: 0

Hey, its working great- a strong 6.9 Gh/s for the moment! I really appriceate the walk through- i was getting burned out digging through all the pages. Hopefully this thread will help someone else out later.

Ps- Have you bothered with the 'tweaking' process?

gt_addict

hero member

Activity: 2534

Merit: 623

No worries. Yea let us know if it works. Bare in mind the gekkos can be a bit temperamental to get started. Just unplug and plug them in again if needed. Sometimes I have to do it multiple times before she gets going on her own Wink

LukeTheMiner

newbie

Activity: 17

Merit: 0

Thank you so much, I think i've got this working now. I'll post one more update when it's hashing away

gt_addict

hero member

Activity: 2534

Merit: 623

You want the link that's labelled "Windows.7" NOT the tar.gz one.

You will need to uncompress it using winzip or similar.

You won't need to build your own version, just create a ".bat" file with pool info and freq settings etc.

gt_addict

hero member

Activity: 2534

Merit: 623

Quote from: LukeTheMiner on May 02, 2016, 03:19:01 PM

Where did you download your cgminer from?

I downloaded the gekko version from the thread on here. Had the same issue as you so then went to the mining software section and downloaded the official 4.9.2 from the proper thread. Obviously saved each under a different folder name. Then copied and pasted the file from 4.9.2 over to the folder with the gekko version.

I can't copy and paste the page info as I'm on my phone.

The Official cgminer thread is in the "mining software" section on the first page of the thread (which should be at the top).

The gekko version is in the "hardware" section in the gekko thread, again it's on the first page of that thread.

Download both to separate folders then copy and paste

LukeTheMiner

newbie

Activity: 17

Merit: 0

Where did you download your cgminer from?

When I see a page that looks like the two below I dont know what i'm supposed to be downloading from them.

https://bitbucket.org/TheKano/cgminer-binaries/src

http://ck.kolivas.org/apps/cgminer/

gt_addict

hero member

Activity: 2534

Merit: 623

I had this. Download the regular cgminer 4.9.2 and copy the zlib.dll from that into the folder of te cgminer without it. Should work fine then.

I had it when I downloaded the cgminer-gekko version and the copy and paste from another version of cgminer fixed it.

LukeTheMiner

newbie

Activity: 17

Merit: 0

Well there were 2 versions, I don't have windows xp so I downloaded the first one from this link..

http://ck.kolivas.org/apps/cgminer/zadig/

I don't know what else i'm supposed to do.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Quote from: LukeTheMiner on May 02, 2016, 02:38:15 PM

Yep, I have the Zadig installed, is the file located on the usb miner- because I've not plugged it in yet. I decided it would be best to get the software setup first before just sticking it in.

No, its the driver file you install with Zadig. There's several drivers it can install, you need the right one.

LukeTheMiner

newbie

Activity: 17

Merit: 0

Yep, I have the Zadig installed, is the file located on the usb miner- because I've not plugged it in yet. I decided it would be best to get the software setup first before just sticking it in.

VirosaGITS

legendary

Activity: 1302

Merit: 1068

Did you install zadig, from the instructions on the OP you linked?

http://ck.kolivas.org/apps/cgminer/zadig/

There's also a support thread for this.

LukeTheMiner

newbie

Activity: 17

Merit: 0

I've been mining with the S3 and S7 miners for awhile, and for fun I bought a GekkoScience Compac USB but i'm having some challenges getting the software set up.

When I go to install the "gekko cgminer" my computer says that the zlib1.dll is missing.

I've found that this file should have been included in the special Gekko cgminer but wasnt, where is a safe/trusted source to find this file?

For completeness, these are the post's I referenced.

---GekkoScience Compac BM1384 Stickminer Official Support Thread
https://bitcointalksearch.org/topic/m.12359541

------related posts
https://bitcointalksearch.org/topic/m.14553846
https://bitcointalksearch.org/topic/m.14087417

---OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.9.2
https://bitcointalksearch.org/topic/official-cgminer-mining-software-thread-for-linuxwinosxmipsarmr-pi-4110-28402

This appears to be the original cgminer, and i'm not sure if this file i'm looking for exists somewhere in this directory
http://ck.kolivas.org/apps/cgminer/

In addition, will i have to go through this process to set up the gekko miner?
https://bitcointalksearch.org/topic/building-cgminer-on-windows-with-mingw-step-by-step-2015-07-10-1112039

Any help or clarification would be appreciated

Topic: GekkoScience Compac USB [ missing zlib1.dll ] (Read 1700 times)