Author

Topic: Getting into the mining game (Read 1768 times)

legendary
Activity: 1792
Merit: 1047
November 27, 2013, 02:08:53 PM
#18
800k to drop on mining hardware... any ideas?

Bitfury or KNC have proven tech.

If KNCminer 20nm works out then you are set.
hero member
Activity: 490
Merit: 500
November 27, 2013, 10:47:02 AM
#17
800k to drop on mining hardware... any ideas?

I would contract Black Arrow they're trying to raise the final part of $5m needed to put an ASIC into production, you could maybe work out a partnership deal or exclusive reseller deal for your location. 800k would go a long way to fill that 1.5m hole they're trying to raise. Black Arrow has a 100GH/s consumer product on the drawing board that could have the potential to go into retail stores that's never been done before it could be a big opportunity. Of course do your own due diligence.

Quote
We have funded more than 70% of the NRE from our own funds. We can get the remaining 30% from various investors but we wish to give our customers the opportunity to benefit of low prices while helping us complete this project.
https://bitcointalksearch.org/topic/black-arrow-28nm-100ghash-bitcoin-asic-from-049ghs-294197
legendary
Activity: 1764
Merit: 1756
Verified Bernie Bro - Feel The Bern!
November 27, 2013, 08:36:44 AM
#16
Your concern is duly noted and I will proceed with extreme caution, thanks for the heads up.

Careful when listening to anyone on this forum.  Mr BCP19 is a stoic BFL and Inaba Fanboi.  Both seem to have a personal agenda against others on this forum.  Do your own research please and form your own opinion.  I'm not advocating one or the other I have never done business personally with either company.
Thanks for the input flying hellfish, I honestly can't understand how anybody could support inaba.

I mean it's bad enough that the company has pulled a scam the likes of which has not been seen since pirateat40, breaking just about every single trade law in existence.
But Inaba's "What the fuck you gonna do about it?" attitude is the icing on the cake  Kiss


I may be a terrible trader but I certainly have seen it all when it comes to scams and will be making up my own mind.

I really do appreciate your's and everybody else's input.

Cue Inaba popping up his villainous, pustuled swine face in an unrelated thread at the first mention of his name.

Hope you knew I was joking about the short sales right?  

I put up that face icon... Grin Grin Grin



Whew, I wasn't sure. I didn't wanna hurt your feelings in case you were being cereal  Cheesy

It was quite funny, looking back on the bASIC days when BFL appeared to pull numbers out of their ass just to squash bASICs phantom numbers (ya we all know how those "Estimates" worked out!).  The other bit I found hilarious was the "Fire Your Customer" Mantra Inaba ran around spewing.  LOL if that was such a fantastic approach why are they not still doing it?  Hell as a customer you can't even "quit" any more let alone get fired!!!!

I could go on but I won't, I will wish you the best of luck on your investment though (whatever you decide)!
full member
Activity: 219
Merit: 106
November 27, 2013, 08:11:08 AM
#15
Your concern is duly noted and I will proceed with extreme caution, thanks for the heads up.

Careful when listening to anyone on this forum.  Mr BCP19 is a stoic BFL and Inaba Fanboi.  Both seem to have a personal agenda against others on this forum.  Do your own research please and form your own opinion.  I'm not advocating one or the other I have never done business personally with either company.
Thanks for the input flying hellfish, I honestly can't understand how anybody could support inaba.

I mean it's bad enough that the company has pulled a scam the likes of which has not been seen since pirateat40, breaking just about every single trade law in existence.
But Inaba's "What the fuck you gonna do about it?" attitude is the icing on the cake  Kiss

I may be a terrible trader but I certainly have seen it all when it comes to scams and will be making up my own mind.

I really do appreciate your's and everybody else's input.

Cue Inaba popping up his villainous, pustuled swine face in an unrelated thread at the first mention of his name.

Hope you knew I was joking about the short sales right?  

I put up that face icon... Grin Grin Grin



Whew, I wasn't sure. I didn't wanna hurt your feelings in case you were being cereal  Cheesy
full member
Activity: 238
Merit: 100
ASIC Myth Buster
November 27, 2013, 07:52:47 AM
#14
Hope you knew I was joking about the short sales right?  

I put up that face icon... Grin Grin Grin

legendary
Activity: 1764
Merit: 1756
Verified Bernie Bro - Feel The Bern!
November 27, 2013, 07:48:35 AM
#13
Your concern is duly noted and I will proceed with extreme caution, thanks for the heads up.

Careful when listening to anyone on this forum.  Mr BCP19 is a stoic BFL and Inaba Fanboi.  Both seem to have a personal agenda against others on this forum.  Do your own research please and form your own opinion.  I'm not advocating one or the other I have never done business personally with either company.
full member
Activity: 219
Merit: 106
November 27, 2013, 07:32:48 AM
#12
May be contact KnC and see if you can be one of their new investor?

Hey, If you put the cash into the Exchange, I'll trade it for you daily!  Short Sales   Grin
Sorry bud, it would be downright cretinous of me to start handing out large amounts of cash to strangers on a forum.
Maybe if I had about 10x more though  Smiley

I like very much, pm incoming.
Love that the management meetings are in canberra, just down the rd from me.

Looks like the best gh/$ ratio around by far and I may be able to help get their production costs way down with the large volume.
I don't have much technical expertise unfortunately I'm just a caveman mashing buttons  Embarrassed
Best ratio?  Did you read that this is just a board and you have to buy the chips seperately?  Don't be fooled by Bick's smooth advertising, he's already failed at one project where all he had to do was add chips to a board and sell them.  He's just drooling over your $800k and nothing else(well... unless you believe Inaba...)
I wasn't aware of his failure to do anything.
I was under the impression that it was more avalon's screwup than anybody else's,
but I kinda stopped paying attention after it bacame apparent avalon weren't shipping on time and bkkcoins went mia.

I noticed the wasp project was started by an aussie before he had anything to do with it but thought nothing of it cos they were using older gen chips.
I like that side of things especially cos I'm in aus myself so would be able to have much more active participation.

When time to deployment is factored in $5/gh early jan will be a lot better than $3/gh in march.

Your concern is duly noted and I will proceed with extreme caution, thanks for the heads up.
hero member
Activity: 532
Merit: 500
November 27, 2013, 07:15:54 AM
#11
May be contact KnC and see if you can be one of their new investor?

Hey, If you put the cash into the Exchange, I'll trade it for you daily!  Short Sales   Grin
Sorry bud, it would be downright cretinous of me to start handing out large amounts of cash to strangers on a forum.
Maybe if I had about 10x more though  Smiley

I like very much, pm incoming.
Love that the management meetings are in canberra, just down the rd from me.

Looks like the best gh/$ ratio around by far and I may be able to help get their production costs way down with the large volume.
I don't have much technical expertise unfortunately I'm just a caveman mashing buttons  Embarrassed
Best ratio?  Did you read that this is just a board and you have to buy the chips seperately?  Don't be fooled by Bick's smooth advertising, he's already failed at one project where all he had to do was add chips to a board and sell them.  He's just drooling over your $800k and nothing else(well... unless you believe Inaba...)
full member
Activity: 219
Merit: 106
November 27, 2013, 06:55:07 AM
#10
May be contact KnC and see if you can be one of their new investor?

Hey, If you put the cash into the Exchange, I'll trade it for you daily!  Short Sales   Grin
Sorry bud, it would be downright cretinous of me to start handing out large amounts of cash to strangers on a forum.
Maybe if I had about 10x more though  Smiley

I like very much, pm incoming.
Love that the management meetings are in canberra, just down the rd from me.

Looks like the best gh/$ ratio around by far and I may be able to help get their production costs way down with the large volume.
I don't have much technical expertise unfortunately I'm just a caveman mashing buttons  Embarrassed
sr. member
Activity: 283
Merit: 250
November 27, 2013, 06:37:32 AM
#9
hero member
Activity: 924
Merit: 1000
full member
Activity: 238
Merit: 100
ASIC Myth Buster
November 27, 2013, 02:19:06 AM
#7
May be contact KnC and see if you can be one of their new investor?

Hey, If you put the cash into the Exchange, I'll trade it for you daily!  Short Sales   Grin
full member
Activity: 189
Merit: 100
November 27, 2013, 12:43:49 AM
#6
I have pre-orders for the new KnC miner 3 TH/S miners. I have pre-orders for 4 of them. Only 1200 in production. PM THE PRICE you are willing to pay, if you are interested. Of course we can use an escrow for the deal.

thanks
karma


Naw I'm cool, I have access to their shop directly and may go with this if nothing else avails itself. Thanks anyways  Wink

guess I was just hoping for too much hehe, thanks
full member
Activity: 219
Merit: 106
November 27, 2013, 12:32:38 AM
#5
I have pre-orders for the new KnC miner 3 TH/S miners. I have pre-orders for 4 of them. Only 1200 in production. PM THE PRICE you are willing to pay, if you are interested. Of course we can use an escrow for the deal.

thanks
karma


Naw I'm cool, I have access to their shop directly and may go with this if nothing else avails itself. Thanks anyways  Wink
full member
Activity: 219
Merit: 106
November 27, 2013, 12:31:45 AM
#4
With that much capital, you might want to find a few more equal partners and start your own Chip Design, then in 3-5 months you'll be mining like no others.  All the 28nm or 20nm chips to yourself.

or Simply invest in the exchange market.  You may not double in really a short time, but you can get 10% or more return each day if you ride the wave right in short sales.



800k to drop on mining hardware... any ideas?
I would love to find partners but have no idea where to start.
Also by the time we get it out I would imagine we would be pwned by other companies. Good idea though I may look into it.
I tried the exchange thing, I would have about 3-4mil now if i wasn't so bad at trading  Cry
full member
Activity: 238
Merit: 100
ASIC Myth Buster
November 27, 2013, 12:05:26 AM
#3
With that much capital, you might want to find a few more equal partners and start your own Chip Design, then in 3-5 months you'll be mining like no others.  All the 28nm or 20nm chips to yourself.

or Simply invest in the exchange market.  You may not double in really a short time, but you can get 10% or more return each day if you ride the wave right in short sales.



800k to drop on mining hardware... any ideas?
full member
Activity: 189
Merit: 100
November 26, 2013, 11:59:34 PM
#2
I have pre-orders for the new KnC miner 3 TH/S miners. I have pre-orders for 4 of them. Only 1200 in production. PM THE PRICE you are willing to pay, if you are interested. Of course we can use an escrow for the deal.

thanks
karma

full member
Activity: 219
Merit: 106
November 26, 2013, 11:51:29 PM
#1
800k to drop on mining hardware... any ideas?
Jump to: