Topic: Getting under 1Gh/z per Antminer U1 (Read 639 times)
I see you have a bat file set up did u have to also set up a .conf file , I am confused by this file set up (.conf) and have been trying o learn how before my u1's come in the mail. Also are the powered hubs available anywhere
Your hub isnt powering them enough, you have to reduce the overclock. Mine did the same thing. Move it to 09 or 08, and you will get a nice hash rate, no HW errors, and be all good.
Whats the best multipool I could use? The one I was using just got hacked and I lost all my BC.. 
Can only echo the above, don't bother with the x0A91 clock setting, none of my U1's like it either, hashing errors go through the roof and rejects too. But also that pool looks crappy. Are you even using a powered USB hub, or is is passive? With 4 U1's you need a hub with at least 2A available, preferably more.
Try x0981 or even x0881 clock settings, using a lower clock but getting more reliable and stable hashing is better in the long run when you have errors like that.
Try x0981 or even x0881 clock settings, using a lower clock but getting more reliable and stable hashing is better in the long run when you have errors like that.
Is it normal that I am getting the following speeds?
Pool You're using sucks. Too much rejects... I think also power supply to hub You're using sucks too. Too much hardware errors. How is situation with x0981?
Is it normal that I am getting the following speeds?
http://aborter.com/antminer.jpg
Here is my Bat file:
bfgminer.exe -S antminer:all -o pool:porr -u username -p password --set-device antminer:clock=x0A81
Any help would be greatly appreciated.
Thanks
http://aborter.com/antminer.jpg
Here is my Bat file:
bfgminer.exe -S antminer:all -o pool:porr -u username -p password --set-device antminer:clock=x0A81
Any help would be greatly appreciated.
Thanks
Jump to: