Topic: Gigabyte GA-M61PME-S2P motherboard not booting with 5770 card (Read 2160 times)
I can't be 100%, but if the card has been tested in another machine I do feel fairly confident that it's the power supply. It would probably be an older ATX 1.x type, and one rated at 350W can be likely to have too little power on the +12V rail for a ~100W GPU since it would have to be shared with the CPU and anything else that needs 12V.
Thanks for responding
Could well be the PSU - it's a pretty low quality PSU (CRS brand, from memory, and it's 350W). There wasn't a 6-PIN PCIe connector, so yes I am using an adapter.
Could well be the PSU - it's a pretty low quality PSU (CRS brand, from memory, and it's 350W). There wasn't a 6-PIN PCIe connector, so yes I am using an adapter.
The ticking sound makes me think of power supply issues, as I've heard it with failing PSUs. It tries to power up, but fails and starts over. It's not a very power hungry card, but if it's an older PSU it could be that it can't provide the 12V power needed even if it's in working order.
So, what kind of PSU are you using? Does it have a 6-pin PCE-e connector, or did you have to hook the card up with an adapter?
So, what kind of PSU are you using? Does it have a 6-pin PCE-e connector, or did you have to hook the card up with an adapter?
I have a pretty basic motherboard, being a Gigabyte GA-M61PME-S2P
It has 1 PCIe x16 slot, and I tried putting my Asus 5770 graphics card in it, but the system wouldn't boot - it just kept making a ticking noise (when booting normally, it makes that noise just once on power-on, so hearing the noise repeated says to me it is trying to restart itself about every 2 seconds).
As far as I can tell, the BIOS settings seem correct (they specify to use the graphics card when there is one).
It boots normally again when I unplug the card. Any suggestions?
Would be a shame if I couldn't get it working, as I had to take to my case with tin-snips to make the card fit! ...lol
It has 1 PCIe x16 slot, and I tried putting my Asus 5770 graphics card in it, but the system wouldn't boot - it just kept making a ticking noise (when booting normally, it makes that noise just once on power-on, so hearing the noise repeated says to me it is trying to restart itself about every 2 seconds).
As far as I can tell, the BIOS settings seem correct (they specify to use the graphics card when there is one).
It boots normally again when I unplug the card. Any suggestions?
Would be a shame if I couldn't get it working, as I had to take to my case with tin-snips to make the card fit! ...lol
Jump to: