I have H110-D3A motherboards and have had no problems with them.
Perhaps your problem is not the motherboard, but the raiser or poor connection when connecting to the raiser.
Do not use SATA raisers for these video cards.
Do you use Hiveos special version for VEGA video cards or standard version?
Topic: Gigabyte H110-D3A Issues (Read 83 times)
I am using an H110-D3A MOBO and did all that they have recommended with the latest bios version installed.
I currently have 4 cards on the board. One of them is Vega 64.
When I push my vega to over 45MH, GPU0 dies!
I removed the GPU from the first slot and tried again but the next GPU died because it was renamed GPU0.
I am using Hiveos, checked with their technical team, and no luck yet:(
Anyone had a similar issue with the MOBO?
I currently have 4 cards on the board. One of them is Vega 64.
When I push my vega to over 45MH, GPU0 dies!
I removed the GPU from the first slot and tried again but the next GPU died because it was renamed GPU0.
I am using Hiveos, checked with their technical team, and no luck yet:(
Anyone had a similar issue with the MOBO?
Jump to: