Gobrrrrrr | Bitcointalksearch.org

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: dkbit98 on August 04, 2022, 02:09:36 PM

Quote from: MoparMiningLLC on July 30, 2022, 11:04:06 PM

I try to do btc only every day. my paychecks are direct deposited to strike which converts it 100% to btc. I ask if they take btc in every business I go to. for those that dont, they have to wait for me to send btc from strike to cash app and sell it for usd then pay them.

I think it's probably easier to live like that in US than in other countries around the world, but I am not saying it's impossible.
With debit cards this could be easier in other countries, but you do need to convert BTC to fiat before making a purchase.
btw I think I saw you commenting on twitter that you purchased Passport hardware wallet Cheesy

Quote from: MoparMiningLLC on July 30, 2022, 11:04:06 PM

and a comment about the seed signer cases - they are open source and can be downloaded direct from the original maker

I know about default seedsigner cases but I was asking about all other alternative cases released by third parties that are also open source.

Quote from: GoBrrr.me on August 04, 2022, 08:59:58 AM

No problem, printing local is the way if you have someone available. PLA is surprisingly sturdy in many situations, just in applications that involve lots of heat or direct sunlight it's prone to warping. Never had a problem with PLA fan ducts, I suppose because the airflow cools the duct as well.

My headphones are going strong with PLA and only heat is one coming from my head Wink

Gotcha. There are quite a few secondary seedsigners cases for sure - have printed a few of f them myself. I am always trying to keep my 9 prusas busy.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: MoparMiningLLC on July 30, 2022, 11:04:06 PM

I try to do btc only every day. my paychecks are direct deposited to strike which converts it 100% to btc. I ask if they take btc in every business I go to. for those that dont, they have to wait for me to send btc from strike to cash app and sell it for usd then pay them.

I think it's probably easier to live like that in US than in other countries around the world, but I am not saying it's impossible.
With debit cards this could be easier in other countries, but you do need to convert BTC to fiat before making a purchase.
btw I think I saw you commenting on twitter that you purchased Passport hardware wallet Cheesy

Quote from: MoparMiningLLC on July 30, 2022, 11:04:06 PM

and a comment about the seed signer cases - they are open source and can be downloaded direct from the original maker

I know about default seedsigner cases but I was asking about all other alternative cases released by third parties that are also open source.

Quote from: GoBrrr.me on August 04, 2022, 08:59:58 AM

No problem, printing local is the way if you have someone available. PLA is surprisingly sturdy in many situations, just in applications that involve lots of heat or direct sunlight it's prone to warping. Never had a problem with PLA fan ducts, I suppose because the airflow cools the duct as well.

My headphones are going strong with PLA and only heat is one coming from my head Wink

GoBrrr.me

newbie

Activity: 17

Merit: 19

Quote from: dkbit98 on July 27, 2022, 02:58:31 PM

Sorry from my side because I had to print my stuff locally and replace original broken parts, but I will consider using GoBrrr next time.
So far my printed parts hold very good, it looks and feels much better than original plastic parts, and I used regular PLA material.
This guy also offered me Nylon material and said that is the best option he has but it was much more expensive than PLA.

No problem, printing local is the way if you have someone available. PLA is surprisingly sturdy in many situations, just in applications that involve lots of heat or direct sunlight it's prone to warping. Never had a problem with PLA fan ducts, I suppose because the airflow cools the duct as well.

As Mopar Mining stated, the original SeedSigner cases are open source, and you can download them directly from github. I will not host those separately, as they are SeedSigner's work and readily available.

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: dkbit98 on March 27, 2022, 10:29:59 AM

Quote from: GoBrrr.me on March 26, 2022, 03:53:20 PM

Thanks for your input! It further strengthens my belief that it's in no way wrong to charge fiat in the Bitcoin space, which some may or may not want to make one believe.

You can tell those people who are thinking that you should use exclusively Bitcoin for accepting payments, to try and live their everyday life only using Bitcoin, and see how far they will go like that Cheesy

I am all for adoption of Bitcoin and adding it as optional payment everywhere, but I would never force people to use only only thing, but rather give them the option to choose.

One small request from me to you, if you can please add .STL files for SeedSigner cases in Download section, or at least post a link to original files, if they are open source.
For closed source special cases some people suggested to add paid .stl files that can be downloaded and printed at home.
I see you currently have only SeedHider and Steuerkreuz Control pad posted there.

I try to do btc only every day. my paychecks are direct deposited to strike which converts it 100% to btc. I ask if they take btc in every business I go to. for those that dont, they have to wait for me to send btc from strike to cash app and sell it for usd then pay them.

it for sure is not easy to do on a daily basis. but i am trying

and a comment about the seed signer cases - they are open source and can be downloaded direct from the original maker

https://github.com/SeedSigner/seedsigner

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on July 27, 2022, 06:39:39 AM

I'm able to print PETG, ABS/ASA (not recommended, though), and various other high-temp materials like nylon. If you want the strongest possible part while still maintaining visual quality, I recommend CarbonFiber infused Nylon (CF-Nylon). Cf-Nylon offers the best layer adhesion and overall stiffness, as well as a high glass transition temperature to withstand heat. But let's assess the perfect material once I have seen the models and know what purpose they're planned for.

Sorry from my side because I had to print my stuff locally and replace original broken parts, but I will consider using GoBrrr next time.
So far my printed parts hold very good, it looks and feels much better than original plastic parts, and I used regular PLA material.
This guy also offered me Nylon material and said that is the best option he has but it was much more expensive than PLA.

GoBrrr.me

newbie

Activity: 17

Merit: 19

Hey! Very sorry for the long wait. I didn't check this thread in a while.

I'm able to print PETG, ABS/ASA (not recommended, though), and various other high-temp materials like nylon. If you want the strongest possible part while still maintaining visual quality, I recommend CarbonFiber infused Nylon (CF-Nylon). Cf-Nylon offers the best layer adhesion and overall stiffness, as well as a high glass transition temperature to withstand heat. But let's assess the perfect material once I have seen the models and know what purpose they're planned for.

And yes, of course I accept custom orders. Grin

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on April 28, 2022, 09:06:24 AM

Orders will be delayes for a few days, as I'm going on vacation.

Hey GoBrrr.me I hope you are back from your holiday vacation and ready for business.

Can you please tell me what kind of materials (petg, abs, nylon, etc.) are you using for 3d printing and are you accepting custom orders, after I send you .STL files.
I need to print four plastic parts but material needs to be strong and resistant to breaks and cracks as much as possible.

GoBrrr.me

newbie

Activity: 17

Merit: 19

It's possible to choose the color for each of the available enclosures. The buttons and joysticks aren't customizable, as switching colors isn't that easy with resin, button colors vary based on what's in the resin printer and how many buttons are left. I plan to get another resin printer when funds allow, then I can offer to make them available in more colors.

It's easier to disassemble vs. the OpenPill and harder vs the OrangePill because the two parts of the LilPill are holding together much better than the parts from the Orange Pill. But luckily, since one can reach the SD card from outside, there's no need to disasseble the LilPill.

On privacy, there is a privacy policy on the website now, as well as an imprint and a cookie notice. The privacy policy and imprint are a bit hidden and finding them requires a few seconds of patience.

I actually had a customer ask about his data in my shop a few days ago, here is my (copypasted) response:

Your data is in my shops database now, BUT:

•   All Data is being purged from the server in regular intervals.
•   Our BTCpayServer and Node are both self-hosted, so absolutely no third parties can see the correlation between order and transaction.
•   Obviously, since this (gobrrr.me) is a registered company, I’m obliged to keep logs for a few years (7 years here in Austria) -> This is done offline on printed paper.
•   The weakest link for the data is probably the email client, but conveniently, the address used by the BTCpayServer is not sent via mail.
•   The privacy policy can be found here: https://www.gobrrr.me/pp/

Orders will be delayes for a few days, as I'm going on vacation.

Cheers!

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on April 27, 2022, 04:47:34 AM

Thanks for the suggestion. The pictures will change automatically to the correct picture selected enclosure. I'm a very bad photographer and need to add more and better product pictures of all the enclosures in the different colors before that'll work as intended.

Is it possible to choose color when ordering SeedSigner Kit or you are sending one color by default?
One more thing you could add is more information about privacy and what you are doing with personal data of customers (deleting it after X days or not) who order something from your website.

Quote from: GoBrrr.me on April 27, 2022, 04:47:34 AM

The LilPill is using less material and saves print time, which is reflected in the pricing.

I was wondering if it is easier to disassemble LilPill case compared to other enclosures?

GoBrrr.me

newbie

Activity: 17

Merit: 19

Thanks for the suggestion. The pictures will change automatically to the correct picture selected enclosure. I'm a very bad photographer and need to add more and better product pictures of all the enclosures in the different colors before that'll work as intended.

Edit: The LilPill is using less material and saves print time, which is reflected in the pricing.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on April 26, 2022, 02:58:09 AM

The SeedSigner kits have been updated and can now be configured to come with any of the available enclosures. The SeedSigner Kit Sale ends with this month as well.

Looks very good!
I see that you added options to manually select enclosure, and Lil'Pill is even cheaper than OrangePill enclosure.
One suggestion I have for you is to add separate images for this three options, or it could be confusing for some newbies ordering SeedSigner Kit.

GoBrrr.me

newbie

Activity: 17

Merit: 19

Hello again!

The SeedSigner kits have been updated and can now be configured to come with any of the available enclosures. The SeedSigner Kit Sale ends with this month as well.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on April 15, 2022, 03:00:02 AM

Yes, I plan to change the product layout of the kit entirely, so any enclosure can be chosen to go with it, I'll try to add this asap. Also another new case version from @OrangeSurf is in the pipeline as well and will soon be available.

Thanks for updating.
That is good idea for choosing any available case with kit, and I just hope it's not hard to change cases if you want to replace them.
I know it's very hard to remove open pill case without breaking case or raspberry Pi.

Quote from: GoBrrr.me on April 15, 2022, 03:00:02 AM

That's a neat solution with the trackballs I didn't yet know of, I will look into this, thanks for the pointer. Wink

Check out the size that would fit perfectly for SeedSigner on right side, and you can order this thinkpad stuff in bulk from China for dirt cheap

GoBrrr.me

newbie

Activity: 17

Merit: 19

Regarding the price of Pi Zero's, rest assured I will always offer them for the lowest price possible. When I get the chance to bulk buy them at lower prices, I can lower them again. Right now, this is as good as it gets, unfortunately.

Yes, I plan to change the product layout of the kit entirely, so any enclosure can be chosen to go with it, I'll try to add this asap. Also another new case version from @OrangeSurf is in the pipeline as well and will soon be available.

That's a neat solution with the trackballs I didn't yet know of, I will look into this, thanks for the pointer. Wink

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on April 12, 2022, 07:52:29 AM

Pi Zero 1.3s are back in stock!

€21,67 plus shipping is still higher price for Raspberry Pi than I would like to seem but I can't find many shops that have it available for lower price now.

Quote from: GoBrrr.me on April 12, 2022, 07:52:29 AM

The Lil'Pill SeedSigner enclosure including resin printed buttons is now available for purchase. For those who have their own 3D-printers, the files are available in the download section.

Are you going to make Lil'Pill SeedSigner available as a Kit, same way you have Open Pill and Orange Pill kits?
This would be great alternative for newbies and everyone else who wants to buy one more device.

Quote from: GoBrrr.me on April 12, 2022, 07:52:29 AM

An experimental threaded joystick, which threads on the dreaded "stabby nub" of the SeedSigners Waveshare display, is currently being sent out to testers, one has already confirmed it works as intended. The file is available in our download section, and the resin printed joysticks will be added to every new order.

You know that someone found out those little red trackoints zsed on Thinkpad laptops can also work for SeedSigners

I don't know if you recently reduced prices for SeedSigner Kits, but this sale prices are looking sweet, and you don't have to waste time collecting all parts separately.

GoBrrr.me

newbie

Activity: 17

Merit: 19

Hello again, hope you are all well!

Good news everyone! Grin

1. Pi Zero 1.3s are back in stock!

2. The Lil'Pill SeedSigner enclosure including resin printed buttons is now available for purchase. For those who have their own 3D-printers, the files are available in the download section.

3. Seedmint Plates (25x25 & 29x29) are also back in stock, and we now offer a very high quality automatic center punch as well as 3D-printed waterproof enclosures for the plates.

An experimental threaded joystick, which threads on the dreaded "stabby nub" of the SeedSigners Waveshare display, is currently being sent out to testers, one has already confirmed it works as intended. The file is available in our download section, and the resin printed joysticks will be added to every new order. Instructions for installment come with them, but please be aware that you can damage your SeedSigner with it before trying them out.

That's all for now, thank you for reading!

GoBrrr.me

newbie

Activity: 17

Merit: 19

Quote from: dkbit98 on April 02, 2022, 01:04:45 PM

Quote from: GoBrrr.me on April 01, 2022, 07:59:00 AM

Regarding stock, I'm fortunate enough to still have some in stock from last year. I don't know how long they will last. I found some 2Ws locally with WiFi and ordered a bunch, I plan to remove all of those WiFi chips once I get them. As is it, the Pi situation doesn't look too good, but I do know some are still being made, so not all hope is lost in that regard.

I saw whole procedure and schematics for removing wifi chips from Rpi, and it's not that complicated for anyone with basic soldering knowledge, and I think they are faster than old 1.3 version.
This should help speed up slow booting for operating system that is probably one of the worst things in SeedSigner, but I didn't here feedback from people about this.
Check out this website I found for locating Raspberry Pi devices, it can help locating when seller have them in stock again:
https://rpilocator.com/

I'm not sure if the booting speed can be significantly improved on newer Pi Zeros, could be. I recently tested on Tails OS, where it was comparably slow to start, but I'm not enough of a coder to judge why that might be.
Thanks, I'm aware of rpilocator.com, it's a great too and has helped me out countless timesl! Sadly, many bots and ebay vultures know this as well.

I suppose you mean this guide: https://github.com/DesobedienteTecnologico/rpi_disable_wifi_and_bt_by_hardware

It works really well, once you get the hang of it, can confirm.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on April 01, 2022, 07:59:00 AM

Regarding stock, I'm fortunate enough to still have some in stock from last year. I don't know how long they will last. I found some 2Ws locally with WiFi and ordered a bunch, I plan to remove all of those WiFi chips once I get them. As is it, the Pi situation doesn't look too good, but I do know some are still being made, so not all hope is lost in that regard.

I saw whole procedure and schematics for removing wifi chips from Rpi, and it's not that complicated for anyone with basic soldering knowledge, and I think they are faster than old 1.3 version.
This should help speed up slow booting for operating system that is probably one of the worst things in SeedSigner, but I didn't here feedback from people about this.
Check out this website I found for locating Raspberry Pi devices, it can help locating when seller have them in stock again:
https://rpilocator.com/

GoBrrr.me

newbie

Activity: 17

Merit: 19

Yes, I read that story of a Ukrainian guy who managed to buy a car with bitcoin and get out.

Regarding stock, I'm fortunate enough to still have some in stock from last year. I don't know how long they will last. I found some 2Ws locally with WiFi and ordered a bunch, I plan to remove all of those WiFi chips once I get them. As is it, the Pi situation doesn't look too good, but I do know some are still being made, so not all hope is lost in that regard.

And yes, I agree, unfortunately, this space is riddled with scammers, and it's not going to change anytime soon.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on March 27, 2022, 01:12:21 PM

I agree, living on bitcoin is hard. Even harder, where strike is not an option, and probably won't be anytime soon. I also ask a lot of businesses if I can pay in bitcoin, but right now, it's far and few in between, if any. I helped two local businesses in accepting bitcoin in their shops, though, we're getting there.

It is hard to use only bitcoin, unless you are living in a war zone, banks are closed and your fiat ATM machines are not working or they are out of cash.
We have examples of people being able to survive or buy a car they needed only using bitcoin.

Quote from: GoBrrr.me on March 27, 2022, 01:12:21 PM

Edit: In the meantime, use these links to the OpenPill and OrangePill downloads on the official SeedSigner GitHub

Thanks, and I hope you have enough Raspberry Pi zeros in stock, because prices are going up quickly, that is if you can find them anywhere.
It's not looking like chain supply crisis for microchips will be resolved any time soon, and now I can't even find Rpi v2 with wireless to buy.

Quote from: MoparMiningLLC on March 27, 2022, 12:26:41 PM

I do ask if I can pay with it everywhere as well - some surprisingly say sure and whip out their phones.

I ask that all the time, but many people still think it's a scam Roll Eyes

maybe because we saw many fake accounts created of public figures asking for Bitcoin payments, and regular people than associate bitcoin with scam...
Scammers even hijack their social media profiles and then ask for bitcoin ransom to return their accounts.

GoBrrr.me

newbie

Activity: 17

Merit: 19

Quote from: dkbit98 on March 27, 2022, 10:29:59 AM

Quote from: GoBrrr.me on March 26, 2022, 03:53:20 PM

Thanks for your input! It further strengthens my belief that it's in no way wrong to charge fiat in the Bitcoin space, which some may or may not want to make one believe.

You can tell those people who are thinking that you should use exclusively Bitcoin for accepting payments, to try and live their everyday life only using Bitcoin, and see how far they will go like that Cheesy

I am all for adoption of Bitcoin and adding it as optional payment everywhere, but I would never force people to use only only thing, but rather give them the option to choose.

One small request from me to you, if you can please add .STL files for SeedSigner cases in Download section, or at least post a link to original files, if they are open source.
For closed source special cases some people suggested to add paid .stl files that can be downloaded and printed at home.
I see you currently have only SeedHider and Steuerkreuz Control pad posted there.

Good point. That settles this question for me once and for all. Or, until hyperbitcoinization. Cheesy

I will add those asap. Good to see someone finally looked at the downloads section.

@MoparMining

I agree, living on bitcoin is hard. Even harder, where strike is not an option, and probably won't be anytime soon. I also ask a lot of businesses if I can pay in bitcoin, but right now, it's far and few in between, if any. I helped two local businesses in accepting bitcoin in their shops, though, we're getting there.

Edit: In the meantime, use these links to the OpenPill and OrangePill downloads on the official SeedSigner GitHub:

https://github.com/SeedSigner/seedsigner/tree/main/enclosures/open_pill
https://github.com/SeedSigner/seedsigner/tree/main/enclosures/orange_pill/print_files

And the "LilPill" you already know:
https://cults3d.com/en/3d-model/gadget/lil-pill-seedsigner-case

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Using bitcoin 24/7 is hard. I personally carry no bank account with USD outside of cashapp and paypal - which I use for accepting non BTC payments - I usually convert it to Bitcoin upon receipt though. My regular daytime job pays me in fiat but I have it direct deposited to Strike which converts to Bitcoin at time of deposit but thst being said - I still have to convert BTC to fiat daily. I just do it and fuck the conversion rate - If I lose out net for the year, I will claim it as a capital gains loss anyways. I do ask if I can pay with it everywhere as well - some surprisingly say sure and whip out their phones.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on March 26, 2022, 03:53:20 PM

Thanks for your input! It further strengthens my belief that it's in no way wrong to charge fiat in the Bitcoin space, which some may or may not want to make one believe.

You can tell those people who are thinking that you should use exclusively Bitcoin for accepting payments, to try and live their everyday life only using Bitcoin, and see how far they will go like that Cheesy

I am all for adoption of Bitcoin and adding it as optional payment everywhere, but I would never force people to use only only thing, but rather give them the option to choose.

One small request from me to you, if you can please add .STL files for SeedSigner cases in Download section, or at least post a link to original files, if they are open source.
For closed source special cases some people suggested to add paid .stl files that can be downloaded and printed at home.
I see you currently have only SeedHider and Steuerkreuz Control pad posted there.

GoBrrr.me

newbie

Activity: 17

Merit: 19

Quote from: dkbit98 on March 24, 2022, 07:16:39 AM

Quote from: GoBrrr.me on March 23, 2022, 02:12:45 PM

The STL for the LilPill is shared here: "https://twitter.com/_cybernomad/status/1481090392632147970?s=20&t=1VHwbSrEb2fcByd7DI8fMQ".

Wow! That is a one great looking case for SeedSigner, it's smaller than original and I like it much more than orange pill case.

I'm printing a few right now, and I've also been in contact with the creator, and he has no problem with me selling the cases. I'll update this thread once they're available in the shop. The best part about this case is the access to the SD card without having to take it apart.

Quote from: GoBrrr.me on March 23, 2022, 02:12:45 PM

If possible, I'd love to offer more of those cool new cases people have designed, especially the one from @designbtc. But I don't want to profit from other people's open source designs without their consent. I can contact the designers, if they agree I'd be more than happy to offer their cases as well.

You can always print those cases and post a link below to .stl files.
Some people don't have 3dprinters or they are lazy to find local 3d printer shop, so there is nothing bad if they buy them from you.

Yes, of course, that's a very good point.

Quote from: GoBrrr.me on March 23, 2022, 02:12:45 PM

Honest question to the community, should I just ditch paypal right now on the spot? I'd very much appreciate your opinions.

No, I don't think you should remove option for Paypal payments (even if I am not a fan of PP).
People love to have choice when they want to purchase stuff, and there could always be some issues with other payments methods, for example high fees for Bitcoin.
Better think that some people maybe want to buy SeedSigner with fiat money so they can start using Bitcoin later.
I would want to enable as much payment options as possible, if it was my shop Wink

Thanks for your input! It further strengthens my belief that it's in no way wrong to charge fiat in the Bitcoin space, which some may or may not want to make one believe.

@BobbyCoins

Thanks for the order and the first review in this forum, very much appreciated. That's my new favorite Austrian saying.
And yes, a few of the Alpencoin DIY Kits are still available. More are coming soon, hopefully.

Last but not least, the newest product on GoBrrr.me is a full fledged Bitcoin & Lightning Network node kit including a customizable case and hardware.

BobbyCoins

copper member

Activity: 153

Merit: 64

₿ THE CHANGE

THX for sharing, Frank!

I instantly ordered some of the 'AlpenCoin DIY Kits' which are still available (bargain hunters really should have a look at it): https://www.gobrrr.me/product/alpencoin-diy-kit
Since I live in the same country where the shop is located, the delivery time was correspondingly short and everything worked perfectly.

@ Patrick / GoBrrr.me: Ditching paypal (or other FIAT payment methods) will shrink your customer base massively => paying in FIAT is -let's say- 'easier' for the Bitcoin-hearted-customer than giving away precious Bitcoins.
You can go "full Bitcoin only payments" once you've created an outstanding piece of art or somehow reached cult status maybe by doing limited editions (where you can proof the limitation)... which kinda works against the 3D printing mentality which I'm getting from your posts/shop/etc.
And even when you've created such an artwork/collectible: by making it purchaseable with Bitcoin only you'd cut out an immense part of interested buyers.

Or as an Austrian saying goes: There is still a lot of water running down the Danube before Hyper-Bitcoinization happens.

dkbit98

legendary

Activity: 2212

Merit: 7064

Quote from: GoBrrr.me on March 23, 2022, 02:12:45 PM

The STL for the LilPill is shared here: "https://twitter.com/_cybernomad/status/1481090392632147970?s=20&t=1VHwbSrEb2fcByd7DI8fMQ".

Wow! That is a one great looking case for SeedSigner, it's smaller than original and I like it much more than orange pill case.

Quote from: GoBrrr.me on March 23, 2022, 02:12:45 PM

If possible, I'd love to offer more of those cool new cases people have designed, especially the one from @designbtc. But I don't want to profit from other people's open source designs without their consent. I can contact the designers, if they agree I'd be more than happy to offer their cases as well.

You can always print those cases and post a link below to .stl files.
Some people don't have 3dprinters or they are lazy to find local 3d printer shop, so there is nothing bad if they buy them from you.

Quote from: GoBrrr.me on March 23, 2022, 02:12:45 PM

Honest question to the community, should I just ditch paypal right now on the spot? I'd very much appreciate your opinions.

No, I don't think you should remove option for Paypal payments (even if I am not a fan of PP).
People love to have choice when they want to purchase stuff, and there could always be some issues with other payments methods, for example high fees for Bitcoin.
Better think that some people maybe want to buy SeedSigner with fiat money so they can start using Bitcoin later.
I would want to enable as much payment options as possible, if it was my shop Wink

GoBrrr.me

newbie

Activity: 17

Merit: 19

Thanks dkbit98, it seemed fitting to make an account for the shop now Cheesy

If someone has any suggestions or constructive criticism for my shop, I'm always happy to improve, as I'm just at the start of this journey.
When I started building the first few SeedSigners, sourcing the parts wasn't easy at all, and they naturally became cheaper, the more parts I ordered. So it evolved from offering cases only, to what it is now. Every sale supports the SeedSigner development fund, and people seem to appreciate the effort.

The STL for the LilPill is shared here: "https://twitter.com/_cybernomad/status/1481090392632147970?s=20&t=1VHwbSrEb2fcByd7DI8fMQ".

If possible, I'd love to offer more of those cool new cases people have designed, especially the one from @designbtc. But I don't want to profit from other people's open source designs without their consent. I can contact the designers, if they agree I'd be more than happy to offer their cases as well.

Honest question to the community, should I just ditch paypal right now on the spot? I'd very much appreciate your opinions.

dkbit98

legendary

Activity: 2212

Merit: 7064

Nice work with gobrrr website and I knew about it for some time as I am following SeedSigner project, but what I didn't know is that owner of this website is also a bitcointalk member Wink

Interesting that full kits (Open Pill and Orange Pill) for SeedSigner can be purchased from this website, including Rapsberry Pi Zero, Screen with all other parts and video instructions for assembling.
What I would like to see is those cool new SeedSigner cases that are popping up recently, but it's not always easy to find .stl files for them

Good to see both onchain and lightning payment are available for payments with BtcPayServer.

Frank AlpenCoin

hero member

Activity: 573

Merit: 543

Welcome Patrick!

GoBrrr.me

newbie

Activity: 17

Merit: 19

Quote from: markinaz on March 22, 2022, 12:34:19 PM

Crap, I jumped the gun by being first... lol

Fixed.

markinaz

full member

Activity: 437

Merit: 132

Crap, I jumped the gun by being first... lol

GoBrrr.me

newbie

Activity: 17

Merit: 19

Here's a discount code for you lovely people, first come, first served:

"GoBrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr" without the ""

GoBrrr.me

newbie

Activity: 17

Merit: 19

Thanks MoparMining and thank you, Frank, for posting initially, I should have done this sooner!

Order is confirmed, thanks Mark, and yes by all means, all Bitcoiners should run a Node.

I don't see where it's been asked, but yes, I love to do custom designs. You can contact me via the form on the website or via Telegram --> @Patrick_gobrrr

edit 1:

I can't reply this fast because I'm limited to a post per 360secs. Thanks for all the love.

Quote from: krogoth on March 22, 2022, 06:47:53 AM

Love the website and the items offered! Does he do custom designed 3d figurines? Would love to make my company logo into a 3D figurine.

edit 2:

There you are! Yes, I'd love to if I can deliver what you desire. I'm better with geometric models than organic modeling, but I have 2 very talented 3d modelers on hand for that!

edit 3:

If you order from us and have special wishes or shipping requirements, the order notes field is there for a reason. We respect opsec, and I'm always happy to help in that regard. Use PGP if you must, the key is on the website.

markinaz

full member

Activity: 437

Merit: 132

Thanks Patrick, I wanted to confirm it worked great, I placed my order. Happy to support your site.

Next up, I love the full node kit. I was in El Salvador about a month ago and most of the fellow BTC travelers were running their own, I now feel obligated.

Thanks!

Mark

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: GoBrrr.me on March 22, 2022, 10:24:07 AM

Hi all!

I'm Patrick from GoBTCrrr.me.

Shipping to the US should work now except for SeedSigner Products and SeedMint Plates, please visit the SeedSigner Square Shop if you're interested in ordering those. The plan is to make the SeedSigner as broadly available as possible while supporting the project, which is the reason for this decision.

I know shipping to the US is expensive, I don't profit on shipping and always try to bring the rates down. It's always a trade-off between speed and cost, we can offer DHL Express and Austrian Post priority parcels. DHL really is very fast, with around 7 - 8 days max to the USA, Austrian Post can take from 2 to 4 weeks.

I'll try to come back to this thread regularly in case any questions pop up.

Cheers and keep on stacking! Grin

edit: In case you tried before, and it didn't work. Clear your cache.

good to see you here @Patrick!

ChiBitCTy

legendary

Activity: 2282

Merit: 3014

Thanks for sharing Frank. I have added this site to my list here- https://bitcointalksearch.org/topic/m.50317188

GoBrrr.me

newbie

Activity: 17

Merit: 19

Hi all!

I'm Patrick from GoBTCrrr.me.

Shipping to the US should work now except for SeedSigner Products and SeedMint Plates, please visit the SeedSigner Square Shop if you're interested in ordering those. The plan is to make the SeedSigner as broadly available as possible while supporting the project, which is the reason for this decision.

I know shipping to the US is expensive, I don't profit on shipping and always try to bring the rates down. It's always a trade-off between speed and cost, we can offer DHL Express and Austrian Post priority parcels. DHL really is very fast, with around 7 - 8 days max to the USA, Austrian Post can take from 2 to 4 weeks.

I'll try to come back to this thread regularly in case any questions pop up.

Cheers and keep on stacking! Grin

edit: In case you tried before, and it didn't work. Clear your cache.

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

Quote from: markinaz on March 22, 2022, 08:19:50 AM

I am trying to place an order for a few of the Alpen Coins and cannot find the United States listed as a region. It shows for US Minor Outlying Islands only, and if I select that the shipping seems quite a bit high for the coins.

Anyone else having the same issue?

not sure, I always got mine direct from alpencoin.ch but they are sold out there - it could be that he doesnt ship to the US - I will ask him directly and update my post shortly.

edit:

I asked him and yes he has disabled shipping to the US - but he says he reached out to you directly via email @markzellers

further edit:

he has enabled shipping for all but the seedsigner/seedmint items (he does not want to compete with them here in the US)

markinaz

full member

Activity: 437

Merit: 132

I am trying to place an order for a few of the Alpen Coins and cannot find the United States listed as a region. It shows for US Minor Outlying Islands only, and if I select that the shipping seems quite a bit high for the coins.

Anyone else having the same issue?

krogoth

full member

Activity: 1298

Merit: 176

Krogothmanhattan alt account

Love the website and the items offered! Does he do custom designed 3d figurines? Would love to make my company logo into a 3D figurine.

MoparMiningLLC

legendary

Activity: 2254

Merit: 2419

EIN: 82-3893490

awesome! love to see other 3d printers popping out!

Frank AlpenCoin

hero member

Activity: 573

Merit: 543

Dear Bitcointalk Community,

Let me introduce you to the GoBTCrrrrr store.

This austrian bitcoiner offers 3D prints for sovereign individuals and other bitcoin related things ( SeedSigner kits and components, enclosures for nodes, art prints & bitcoin gadgets.).

https://www.gobrrr.me/

Cheers and have a nice day.

Frank

Topic: Gobrrrrrr (Read 706 times)