Topic: Goldshell KD5 - doesnt start hashing (Read 77 times)

If all boards fail to init on the miner dashboard then they will need to be powered on a test fixture to determine the issue, whether it is temp sensor/other ICs failure or a bad chip.

I have downgraded and now Contacted them. They said it was a problem with my PSU. I bought a new one, but still the same problem, the miner doesn`t start hash.

You should use the correct posting log format so that more people will reply to you.

I'm not good at Goldshell's repair, but according to the official statement, if the miner doesn't work properly after upgrading, you should downgrade the firmware back to the original version. If downgrading doesn't work, you need to contact Goldshell technical support.

No one has a clue?

MINERSYSLOG

 [2023-05-10 14:57:04] C2: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:57:05] C2: K5 scan time is [email protected]
 [2023-05-10 14:57:05] C2: flushing works==>
 [2023-05-10 14:57:08] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:08] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:08] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:08] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:08] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:08] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:08] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:08] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:13] watchdog dev0: read cpb voltage to 30720 success.
 [2023-05-10 14:57:13] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:13] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:13] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:13] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:13] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:13] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:13] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:18] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:19] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:19] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:19] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:19] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:19] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:19] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:19] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:23] C3: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:57:23] C3: gsk5_reinit
 [2023-05-10 14:57:23] C3: gsk5_device_init...
 [2023-05-10 14:57:24] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:24] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:24] watchdog dev1: read cpb voltage to 180 success.
 [2023-05-10 14:57:24] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:24] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:24] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:24] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:24] C3: WatchDog Exit for CPB Idle...
 [2023-05-10 14:57:24] C3: Auto addressing failed
 [2023-05-10 14:57:25] C3: Auto addressing failed
 [2023-05-10 14:57:25] Stratum from pool 0 detected new block
 [2023-05-10 14:57:25] C2: flushing works==>
 [2023-05-10 14:57:25] C1: flushing works==>
 [2023-05-10 14:57:25] C0: flushing works==>
 [2023-05-10 14:57:26] C3: Auto addressing failed
 [2023-05-10 14:57:27] C3: Auto addressing failed
 [2023-05-10 14:57:27] C3: Auto addressing failed
 [2023-05-10 14:57:27] C3: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:57:27] C0: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:57:27] C0: gsk5_reinit
 [2023-05-10 14:57:27] C0: gsk5_device_init...
 [2023-05-10 14:57:28] C3: K5 scan time is [email protected]
 [2023-05-10 14:57:28] C3: flushing works==>
 [2023-05-10 14:57:28] C0: Auto addressing failed
 [2023-05-10 14:57:29] C1: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:57:29] C1: gsk5_reinit
 [2023-05-10 14:57:29] C1: gsk5_device_init...
 [2023-05-10 14:57:29] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:29] C0: WatchDog Exit for CPB Idle...
 [2023-05-10 14:57:29] C0: Auto addressing failed
 [2023-05-10 14:57:29] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:29] C1: WatchDog Exit for CPB Idle...
 [2023-05-10 14:57:29] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:29] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:29] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:29] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:30] C1: Auto addressing failed
 [2023-05-10 14:57:30] C0: Auto addressing failed
 [2023-05-10 14:57:30] Stratum connection to pool 0 interrupted
 [2023-05-10 14:57:30] C2: flushing works==>
 [2023-05-10 14:57:30] Pool 0 stratum+tcp://kda.ss.dxpool.com:6611 not responding!
 [2023-05-10 14:57:30] C3: flushing works==>
 [2023-05-10 14:57:30] C1: Auto addressing failed
 [2023-05-10 14:57:31] C0: Auto addressing failed
 [2023-05-10 14:57:31] C1: Auto addressing failed
 [2023-05-10 14:57:31] C0: Auto addressing failed
 [2023-05-10 14:57:31] C0: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:57:32] Pool 0 stratum difficulty set to 30000
 [2023-05-10 14:57:32] Stratum from pool 0 detected new block
 [2023-05-10 14:57:32] C3: flushing works==>
 [2023-05-10 14:57:32] C2: flushing works==>
 [2023-05-10 14:57:32] C0: K5 scan time is [email protected]
 [2023-05-10 14:57:32] C0: flushing works==>
 [2023-05-10 14:57:32] C1: Auto addressing failed
 [2023-05-10 14:57:33] C1: Auto addressing failed
 [2023-05-10 14:57:33] C1: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:57:33] C1: K5 scan time is [email protected]
 [2023-05-10 14:57:33] C1: flushing works==>
 [2023-05-10 14:57:34] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:34] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:34] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:34] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:34] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:34] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:35] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:35] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:40] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:40] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:40] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:40] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:40] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:40] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:40] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:40] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:45] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:45] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:45] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:45] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:45] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:45] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:45] watchdog dev3: read cpb voltage to 190 success.
 [2023-05-10 14:57:45] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:47] Stratum from pool 0 detected new block
 [2023-05-10 14:57:47] C0: flushing works==>
 [2023-05-10 14:57:47] C2: flushing works==>
 [2023-05-10 14:57:47] C1: flushing works==>
 [2023-05-10 14:57:47] C3: flushing works==>
 [2023-05-10 14:57:50] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:50] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:50] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:50] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:50] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:50] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:50] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:50] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:54] C2: flushing works==>
 [2023-05-10 14:57:54] C0: flushing works==>
 [2023-05-10 14:57:54] C1: flushing works==>
 [2023-05-10 14:57:54] Stratum from pool 0 detected new block
 [2023-05-10 14:57:54] C3: flushing works==>
 [2023-05-10 14:57:55] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:57:55] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:56] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:57:56] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:56] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:57:56] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:57:56] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:57:56] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:01] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:01] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:01] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:01] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:01] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:01] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:01] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:01] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:03] C0: flushing works==>
 [2023-05-10 14:58:03] Stratum from pool 0 detected new block
 [2023-05-10 14:58:03] C3: flushing works==>
 [2023-05-10 14:58:03] C1: flushing works==>
 [2023-05-10 14:58:03] C2: flushing works==>
 [2023-05-10 14:58:05] C2: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:58:05] C2: gsk5_reinit
 [2023-05-10 14:58:05] C2: gsk5_device_init...
 [2023-05-10 14:58:06] C2: Auto addressing failed
 [2023-05-10 14:58:06] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:06] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:06] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:06] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:06] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:06] C2: WatchDog Exit for CPB Idle...
 [2023-05-10 14:58:06] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:06] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:06] C2: Auto addressing failed
 [2023-05-10 14:58:07] C0: flushing works==>
 [2023-05-10 14:58:07] Stratum from pool 0 detected new block
 [2023-05-10 14:58:07] C1: flushing works==>
 [2023-05-10 14:58:07] C3: flushing works==>
 [2023-05-10 14:58:07] C2: Auto addressing failed
 [2023-05-10 14:58:08] C2: Auto addressing failed
 [2023-05-10 14:58:08] C0: flushing works==>
 [2023-05-10 14:58:08] C3: flushing works==>
 [2023-05-10 14:58:08] Stratum from pool 0 detected new block
 [2023-05-10 14:58:08] C1: flushing works==>
 [2023-05-10 14:58:09] C2: Auto addressing failed
 [2023-05-10 14:58:09] C2: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:58:09] C2: K5 scan time is [email protected]
 [2023-05-10 14:58:09] C2: flushing works==>
 [2023-05-10 14:58:11] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:11] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:11] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:11] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:11] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:11] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:12] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:12] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:17] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:17] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:17] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:17] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:17] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:17] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:17] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:17] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:22] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:22] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:22] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:22] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:22] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:22] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:22] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:22] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:24] C0: flushing works==>
 [2023-05-10 14:58:24] C3: flushing works==>
 [2023-05-10 14:58:24] Stratum from pool 0 detected new block
 [2023-05-10 14:58:24] C2: flushing works==>
 [2023-05-10 14:58:24] C1: flushing works==>
 [2023-05-10 14:58:27] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:27] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:27] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:27] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:27] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:27] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:27] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:27] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:28] C3: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:58:28] C3: gsk5_reinit
 [2023-05-10 14:58:28] C3: gsk5_device_init...
 [2023-05-10 14:58:29] C3: Auto addressing failed
 [2023-05-10 14:58:30] C3: Auto addressing failed
 [2023-05-10 14:58:30] C3: Auto addressing failed
 [2023-05-10 14:58:31] C3: Auto addressing failed
 [2023-05-10 14:58:32] C3: Auto addressing failed
 [2023-05-10 14:58:32] C3: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:58:32] C0: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:58:32] C0: gsk5_reinit
 [2023-05-10 14:58:32] C0: gsk5_device_init...
 [2023-05-10 14:58:32] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:32] C0: WatchDog Exit for CPB Idle...
 [2023-05-10 14:58:32] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:32] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:33] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:33] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:33] C3: K5 scan time is [email protected]
 [2023-05-10 14:58:33] C3: flushing works==>
 [2023-05-10 14:58:33] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:33] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:33] C0: Auto addressing failed
 [2023-05-10 14:58:33] C1: !!!Get 0 Nonces in past 60 second, Try reboot dev!!!
 [2023-05-10 14:58:33] C1: gsk5_reinit
 [2023-05-10 14:58:33] C1: gsk5_device_init...
 [2023-05-10 14:58:34] C0: Auto addressing failed
 [2023-05-10 14:58:34] C1: set vout failed.
 [2023-05-10 14:58:35] C0: Auto addressing failed
 [2023-05-10 14:58:35] C1: set watchdog enable failed.
 [2023-05-10 14:58:36] C0: Auto addressing failed
 [2023-05-10 14:58:36] C1: set watchdog enable failed.
 [2023-05-10 14:58:38] C0: set watchdog enable failed.
 [2023-05-10 14:58:38] C0: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:58:38] C1: Auto addressing failed
 [2023-05-10 14:58:38] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:38] C0: WatchDog Exit for CPB Idle...
 [2023-05-10 14:58:38] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:38] C1: WatchDog Exit for CPB Idle...
 [2023-05-10 14:58:38] C0: K5 scan time is [email protected]
 [2023-05-10 14:58:38] C0: flushing works==>
 [2023-05-10 14:58:38] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:38] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:38] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:38] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:38] C1: set watchdog time failed.
 [2023-05-10 14:58:38] C1: Init failed 5 Times, Try reboot later!!!
 [2023-05-10 14:58:39] C1: K5 scan time is [email protected]
 [2023-05-10 14:58:39] C1: flushing works==>
 [2023-05-10 14:58:42] C0: flushing works==>
 [2023-05-10 14:58:42] Stratum from pool 0 detected new block
 [2023-05-10 14:58:42] C3: flushing works==>
 [2023-05-10 14:58:42] C2: flushing works==>
 [2023-05-10 14:58:42] C1: flushing works==>
 [2023-05-10 14:58:43] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:43] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:43] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:43] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:43] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:43] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:44] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:44] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:49] watchdog dev0: read cpb voltage to 50 success.
 [2023-05-10 14:58:49] C0: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:49] watchdog dev1: read cpb voltage to 50 success.
 [2023-05-10 14:58:49] C1: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:49] watchdog dev2: read cpb voltage to 50 success.
 [2023-05-10 14:58:49] C2: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:49] watchdog dev3: read cpb voltage to 50 success.
 [2023-05-10 14:58:49] C3: Read TV_ACCESS MAX Failed...
 [2023-05-10 14:58:52] C1: flushing works==>
 [2023-05-10 14:58:52] Stratum from pool 0 detected new block
 [2023-05-10 14:58:52] C2: flushing works==>
 [2023-05-10 14:58:52] C0: flushing works==>
 [2023-05-10 14:58:52] C3: flushing works==>

Monitor



 [2023-05-10 14:50:52]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:50:52]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4980)  fan2:(80, 5040)  fan3:(80, 5100)  . fan status: 0
 [2023-05-10 14:50:52]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:50:55]  Start check net state...
 [2023-05-10 14:50:55]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:50:55]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:50:55]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:50:58]  Start check net state...
 [2023-05-10 14:50:58]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:50:58]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:50:58]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:01]  Start check net state...
 [2023-05-10 14:51:01]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:01]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:01]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:04]  Start check net state...
 [2023-05-10 14:51:04]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:04]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:04]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:07]  Start check net state...
 [2023-05-10 14:51:07]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:07]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:07]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:10]  Start check net state...
 [2023-05-10 14:51:10]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:10]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:10]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:14]  Start check net state...
 [2023-05-10 14:51:14]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:14]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:14]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:17]  Start check net state...
 [2023-05-10 14:51:17]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:17]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:17]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:20]  Start check net state...
 [2023-05-10 14:51:20]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:20]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:20]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:23]  Start check net state...
 [2023-05-10 14:51:23]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:23]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:23]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:26]  Start check net state...
 [2023-05-10 14:51:26]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:26]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:26]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:29]  Start check net state...
 [2023-05-10 14:51:29]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:29]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:29]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:32]  Start check net state...
 [2023-05-10 14:51:32]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:32]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:32]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:35]  Start check net state...
 [2023-05-10 14:51:35]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:35]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:35]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:38]  Start check net state...
 [2023-05-10 14:51:38]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:38]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:38]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:41]  Start check net state...
 [2023-05-10 14:51:41]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:41]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:41]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:44]  Start check net state...
 [2023-05-10 14:51:45]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:45]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:45]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:48]  Start check net state...
 [2023-05-10 14:51:48]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:48]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:48]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:51]  Start check net state...
 [2023-05-10 14:51:51]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:51]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:51]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:54]  Start check net state...
 [2023-05-10 14:51:54]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:54]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:54]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:51:57]  Start check net state...
 [2023-05-10 14:51:57]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:51:57]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4800)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:51:57]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:00]  Start check net state...
 [2023-05-10 14:52:00]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:00]  [Xminerd] fan0:(80, 5100)  fan1:(80, 5100)  fan2:(80, 5220)  fan3:(80, 5100)  . fan status: 0
 [2023-05-10 14:52:00]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:03]  Start check net state...
 [2023-05-10 14:52:03]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:03]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:03]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:06]  Start check net state...
 [2023-05-10 14:52:06]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:06]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:06]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:09]  Start check net state...
 [2023-05-10 14:52:09]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:09]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:09]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:12]  Start check net state...
 [2023-05-10 14:52:12]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:12]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:12]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:15]  Start check net state...
 [2023-05-10 14:52:15]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:15]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:15]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:19]  Start check net state...
 [2023-05-10 14:52:19]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:19]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:19]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:22]  Start check net state...
 [2023-05-10 14:52:22]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:22]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:22]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:25]  Start check net state...
 [2023-05-10 14:52:25]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:25]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:25]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:28]  Start check net state...
 [2023-05-10 14:52:28]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:28]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:28]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:31]  Start check net state...
 [2023-05-10 14:52:31]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:31]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:31]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:34]  Start check net state...
 [2023-05-10 14:52:34]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:34]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:34]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:37]  Start check net state...
 [2023-05-10 14:52:37]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:37]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:37]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:40]  Start check net state...
 [2023-05-10 14:52:40]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:40]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:40]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:43]  Start check net state...
 [2023-05-10 14:52:43]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:43]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:43]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:46]  Start check net state...
 [2023-05-10 14:52:46]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:46]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:46]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:50]  Start check net state...
 [2023-05-10 14:52:50]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:50]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:50]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:53]  Start check net state...
 [2023-05-10 14:52:53]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:53]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:53]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:56]  Start check net state...
 [2023-05-10 14:52:56]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:52:56]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:52:56]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:52:59]  Start check net state...
 [2023-05-10 14:53:00]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:00]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:00]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:03]  Start check net state...
 [2023-05-10 14:53:03]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:03]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:03]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:06]  Start check net state...
 [2023-05-10 14:53:06]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:06]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4800)  . fan status: 0
 [2023-05-10 14:53:06]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:09]  Start check net state...
 [2023-05-10 14:53:09]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:09]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4800)  fan2:(80, 4800)  fan3:(80, 4800)  . fan status: 0
 [2023-05-10 14:53:09]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:12]  Start check net state...
 [2023-05-10 14:53:12]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:12]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:12]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:15]  Start check net state...
 [2023-05-10 14:53:15]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:15]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:15]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:18]  Start check net state...
 [2023-05-10 14:53:18]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:18]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:18]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:21]  Start check net state...
 [2023-05-10 14:53:21]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:21]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:21]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:24]  Start check net state...
 [2023-05-10 14:53:24]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:24]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:24]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:27]  Start check net state...
 [2023-05-10 14:53:27]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:27]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:27]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:31]  Start check net state...
 [2023-05-10 14:53:31]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:31]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:31]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:34]  Start check net state...
 [2023-05-10 14:53:34]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:34]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:34]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:37]  Start check net state...
 [2023-05-10 14:53:37]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:37]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:37]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:40]  Start check net state...
 [2023-05-10 14:53:40]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:40]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:40]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:43]  Start check net state...
 [2023-05-10 14:53:43]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:43]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:43]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:46]  Start check net state...
 [2023-05-10 14:53:46]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:46]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:46]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:49]  Start check net state...
 [2023-05-10 14:53:49]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:49]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:49]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:52]  Start check net state...
 [2023-05-10 14:53:52]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:52]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:52]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:55]  Start check net state...
 [2023-05-10 14:53:55]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:55]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:55]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:53:58]  Start check net state...
 [2023-05-10 14:53:58]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:53:58]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:53:58]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:01]  Start check net state...
 [2023-05-10 14:54:02]  kda.ss.dxpool.com [18.184.82.43] 6611 open
 [2023-05-10 14:54:02]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:02]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:05]  Start check net state...
 [2023-05-10 14:54:05]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:05]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:05]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:08]  Start check net state...
 [2023-05-10 14:54:08]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:08]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:08]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:11]  Start check net state...
 [2023-05-10 14:54:11]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:11]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4920)  fan2:(80, 4980)  fan3:(80, 4920)  . fan status: 0
 [2023-05-10 14:54:11]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:14]  Start check net state...
 [2023-05-10 14:54:14]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:14]  [Xminerd] fan0:(80, 4980)  fan1:(80, 5040)  fan2:(80, 4980)  fan3:(80, 4920)  . fan status: 0
 [2023-05-10 14:54:14]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:17]  Start check net state...
 [2023-05-10 14:54:17]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:17]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:17]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:20]  Start check net state...
 [2023-05-10 14:54:20]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:20]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:20]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:23]  Start check net state...
 [2023-05-10 14:54:23]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:23]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:23]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:26]  Start check net state...
 [2023-05-10 14:54:26]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:26]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:26]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:29]  Start check net state...
 [2023-05-10 14:54:30]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:30]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:30]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:33]  Start check net state...
 [2023-05-10 14:54:33]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:33]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:33]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:36]  Start check net state...
 [2023-05-10 14:54:36]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:36]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:36]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:39]  Start check net state...
 [2023-05-10 14:54:39]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:39]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:39]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:42]  Start check net state...
 [2023-05-10 14:54:42]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:42]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:42]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:45]  Start check net state...
 [2023-05-10 14:54:45]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:45]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4800)  . fan status: 0
 [2023-05-10 14:54:45]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:48]  Start check net state...
 [2023-05-10 14:54:48]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:48]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:48]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:51]  Start check net state...
 [2023-05-10 14:54:51]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:51]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:51]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:54]  Start check net state...
 [2023-05-10 14:54:54]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:54]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:54]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:54:57]  Start check net state...
 [2023-05-10 14:54:57]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:54:57]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:54:57]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:00]  Start check net state...
 [2023-05-10 14:55:00]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:00]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:00]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:04]  Start check net state...
 [2023-05-10 14:55:04]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:04]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:04]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:07]  Start check net state...
 [2023-05-10 14:55:07]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:07]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:07]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:10]  Start check net state...
 [2023-05-10 14:55:10]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:10]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:10]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:13]  Start check net state...
 [2023-05-10 14:55:13]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:13]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:13]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:16]  Start check net state...
 [2023-05-10 14:55:16]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:16]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:16]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:19]  Start check net state...
 [2023-05-10 14:55:19]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:19]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4920)  . fan status: 0
 [2023-05-10 14:55:19]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:22]  Start check net state...
 [2023-05-10 14:55:22]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:22]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4920)  . fan status: 0
 [2023-05-10 14:55:22]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:25]  Start check net state...
 [2023-05-10 14:55:25]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:25]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:25]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:28]  Start check net state...
 [2023-05-10 14:55:28]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:28]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:28]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:31]  Start check net state...
 [2023-05-10 14:55:31]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:31]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:31]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:35]  Start check net state...
 [2023-05-10 14:55:35]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:35]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:35]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:38]  Start check net state...
 [2023-05-10 14:55:38]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:38]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:38]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:41]  Start check net state...
 [2023-05-10 14:55:41]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:41]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:41]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:44]  Start check net state...
 [2023-05-10 14:55:44]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:44]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:44]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:47]  Start check net state...
 [2023-05-10 14:55:47]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:47]  [Xminerd] fan0:(80, 4800)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:47]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:50]  Start check net state...
 [2023-05-10 14:55:50]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:50]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:50]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:53]  Start check net state...
 [2023-05-10 14:55:53]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:53]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:53]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:56]  Start check net state...
 [2023-05-10 14:55:56]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:56]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:56]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:55:59]  Start check net state...
 [2023-05-10 14:55:59]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:55:59]  [Xminerd] fan0:(80, 4920)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:55:59]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:56:02]  Start check net state...
 [2023-05-10 14:56:02]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:56:02]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:56:02]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:56:06]  Start check net state...
 [2023-05-10 14:56:06]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:56:06]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:56:06]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:56:09]  Start check net state...
 [2023-05-10 14:56:09]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:56:09]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:56:09]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:56:12]  Start check net state...
 [2023-05-10 14:56:12]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:56:12]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:56:12]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:56:15]  Start check net state...
 [2023-05-10 14:56:15]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:56:15]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4860)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:56:15]  [Xminerd] NCF(0,1,0)
 [2023-05-10 14:56:18]  Start check net state...
 [2023-05-10 14:56:18]  kda.ss.dxpool.com [3.67.32.208] 6611 open
 [2023-05-10 14:56:18]  [Xminerd] fan0:(80, 4860)  fan1:(80, 4920)  fan2:(80, 4860)  fan3:(80, 4860)  . fan status: 0
 [2023-05-10 14:56:18]  [Xminerd] NCF(0,1,0)

        
        

SYSLOG

 [2023-05-10 14:33:53] Get Hshistory By Socket Error
 [2023-05-10 14:33:54] Socket connect failed: Connection refused
 [2023-05-10 14:33:54] Exec dev By Socket Error
 [2023-05-10 14:33:54] Get Pools Config Error
 [2023-05-10 14:33:54] Socket connect failed: Connection refused
 [2023-05-10 14:33:54] Get Hshistory By Socket Error
 [2023-05-10 14:33:55] Get Pools Config Error
 [2023-05-10 14:33:55] Socket connect failed: Connection refused
 [2023-05-10 14:33:55] Get Hshistory By Socket Error
 [2023-05-10 14:33:56] Socket connect failed: Connection refused
 [2023-05-10 14:33:56] Exec dev By Socket Error
 [2023-05-10 14:33:56] Get Pools Config Error
 [2023-05-10 14:33:56] Socket connect failed: Connection refused
 [2023-05-10 14:33:56] Get Hshistory By Socket Error
 [2023-05-10 14:33:57] Get Pools Config Error
 [2023-05-10 14:33:57] Socket connect failed: Connection refused
 [2023-05-10 14:33:57] Get Hshistory By Socket Error
 [2023-05-10 14:33:58] {
 [2023-05-10 14:33:58]  "api-listen": true,
 [2023-05-10 14:33:58]  "api-allow": "W:127.0.0.1,A:0/0",
 [2023-05-10 14:33:58]  "malgo": "blake2s",
 [2023-05-10 14:33:58]  "text-only": true,
 [2023-05-10 14:33:58]  "skip-security-checks": 100,
 [2023-05-10 14:33:58]  "set": [
 [2023-05-10 14:33:58]   "intchains_qomo:vfff=0.430000:840:100:100",
 [2023-05-10 14:33:58]   "intchains_qomo:algo=blake2s(KDA)"
 [2023-05-10 14:33:58]  ],
 [2023-05-10 14:33:58]  "pools": [
 [2023-05-10 14:33:58]   {
 [2023-05-10 14:33:58]    "url": "stratum+tcp://kda.ss.dxpool.com:6611",
 [2023-05-10 14:33:58]    "user": "kungen12321.KD5",
 [2023-05-10 14:33:58]    "pass": "123",
 [2023-05-10 14:33:58]    "pool-priority": 0
 [2023-05-10 14:33:58]   }
 [2023-05-10 14:33:58]  ]
 [2023-05-10 14:33:58] }
 [2023-05-10 14:33:58] [
 [2023-05-10 14:33:58]  {
 [2023-05-10 14:33:58]   "legal": true,
 [2023-05-10 14:33:58]   "url": "stratum+tcp://kda.ss.dxpool.com:6611",
 [2023-05-10 14:33:58]   "dragid": 0,
 [2023-05-10 14:33:58]   "active": false,
 [2023-05-10 14:33:58]   "user": "kungen12321.KD5",
 [2023-05-10 14:33:58]   "pass": "123",
 [2023-05-10 14:33:58]   "pool-priority": 0
 [2023-05-10 14:33:58]  }
 [2023-05-10 14:33:58] ]
 [2023-05-10 14:33:58] Socket connect failed: Connection refused
 [2023-05-10 14:33:58] Exec dev By Socket Error
 [2023-05-10 14:33:58] Socket connect failed: Connection refused
 [2023-05-10 14:33:58] Get Hshistory By Socket Error
 [2023-05-10 14:33:58] Socket connect failed: Connection refused
 [2023-05-10 14:33:58] Get Pool Name By Socket Error
 [2023-05-10 14:33:58] Get Pools Status Error
 [2023-05-10 14:33:59] Socket connect failed: Connection refused
 [2023-05-10 14:33:59] Get Hshistory By Socket Error
 [2023-05-10 14:33:59] Socket connect failed: Connection refused
 [2023-05-10 14:33:59] Get Pool Name By Socket Error
 [2023-05-10 14:33:59] Get Pools Status Error
 [2023-05-10 14:34:00] Socket connect failed: Connection refused
 [2023-05-10 14:34:00] Exec dev By Socket Error
 [2023-05-10 14:34:00] Socket connect failed: Connection refused
 [2023-05-10 14:34:00] Get Hshistory By Socket Error
 [2023-05-10 14:34:00] Socket connect failed: Connection refused
 [2023-05-10 14:34:00] Get Pool Name By Socket Error
 [2023-05-10 14:34:00] Get Pools Status Error
 [2023-05-10 14:34:01] Socket connect failed: Connection refused
 [2023-05-10 14:34:01] Get Hshistory By Socket Error
 [2023-05-10 14:34:01] Socket connect failed: Connection refused
 [2023-05-10 14:34:01] Get Pool Name By Socket Error
 [2023-05-10 14:34:01] Get Pools Status Error
 [2023-05-10 14:34:02] ===>[find.goldshell.com/api/miners:443] {
 [2023-05-10 14:34:02]  "miner": "Goldshell-KD5",
 [2023-05-10 14:34:02]  "MAC": "28:E2:97:5C:31:02",
 [2023-05-10 14:34:02]  "IP": "192.168.8.189",
 [2023-05-10 14:34:02]  "SN": "SN-unknown"
 [2023-05-10 14:34:02] }
 [2023-05-10 14:34:02] Socket connect failed: Connection refused
 [2023-05-10 14:34:02] Get Hshistory By Socket Error
 [2023-05-10 14:34:02] Socket connect failed: Connection refused
 [2023-05-10 14:34:02] Get Pool Name By Socket Error
 [2023-05-10 14:34:02] Get Pools Status Error
 [2023-05-10 14:34:03] <===[find.goldshell.com] Recv [{"status":"ok"}]
 [2023-05-10 14:34:03] Socket connect failed: Connection refused
 [2023-05-10 14:34:03] Exec dev By Socket Error
 [2023-05-10 14:34:03] Socket connect failed: Connection refused
 [2023-05-10 14:34:03] Get Hshistory By Socket Error
 [2023-05-10 14:34:03] Socket connect failed: Connection refused
 [2023-05-10 14:34:03] Get Pool Name By Socket Error
 [2023-05-10 14:34:03] Get Pools Status Error
 [2023-05-10 14:34:03] Get Tutorial Settings [2023-05-10 14:34:03] Open File /mnt/config/minerd/settings/.tutorial.json Error
 [2023-05-10 14:34:04] Socket connect failed: Connection refused
 [2023-05-10 14:34:04] Get Hshistory By Socket Error
 [2023-05-10 14:34:04] Socket connect failed: Connection refused
 [2023-05-10 14:34:04] Get Pool Name By Socket Error
 [2023-05-10 14:34:04] Get Pools Status Error
 [2023-05-10 14:34:05] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:0.000000 acc:0.000000) target_temp:85°C
 [2023-05-10 14:34:05] mhs 0.000000
 [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback: continue
 [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback: continue
 [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback, wait
 [2023-05-10 14:34:05] ======> mcb_websocket_manager_callback, wait
 [2023-05-10 14:34:11] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:0.000000 acc:0.000000) target_temp:85°C
 [2023-05-10 14:34:17] ===>[find.goldshell.com/api/miners:443] {
 [2023-05-10 14:34:17]  "miner": "Goldshell-KD5",
 [2023-05-10 14:34:17]  "MAC": "28:E2:97:5C:31:02",
 [2023-05-10 14:34:17]  "IP": "192.168.8.189",
 [2023-05-10 14:34:17]  "SN": "SN-unknown"
 [2023-05-10 14:34:17] }
 [2023-05-10 14:34:18] <===[find.goldshell.com] Recv [{"status":"ok"}]
 [2023-05-10 14:34:18] Fans Change (fan0: 100 ==> 99) (fan1: 100 ==> 99) (fan2: 100 ==> 99) (fan3: 100 ==> 99)  reason(t:0.000000 acc:0.000000) target_temp:85°C
 [2023-05-10 14:34:24] Fans Change (fan0: 100 ==> 99) (fan1: 100 ==> 99) (fan2: 100 ==> 99) (fan3: 100 ==> 99)  reason(t:0.000000 acc:0.000000) target_temp:85°C
 [2023-05-10 14:34:30] ===>[find.goldshell.com/api/miners:443] {
 [2023-05-10 14:34:30]  "miner": "Goldshell-KD5",
 [2023-05-10 14:34:30]  "MAC": "28:E2:97:5C:31:02",
 [2023-05-10 14:34:30]  "IP": "192.168.8.189",
 [2023-05-10 14:34:30]  "SN": "SN-unknown"
 [2023-05-10 14:34:30] }
 [2023-05-10 14:34:31] <===[find.goldshell.com] Recv [{"status":"ok"}]
 [2023-05-10 14:34:31] Fans Change (fan0: 100 ==> 99) (fan1: 100 ==> 99) (fan2: 100 ==> 99) (fan3: 100 ==> 99)  reason(t:0.000000 acc:0.000000) target_temp:85°C
 [2023-05-10 14:34:37] Failed to get temperatures!!
 [2023-05-10 14:34:37] Fans Change (fan0: 99 ==> 98) (fan1: 99 ==> 98) (fan2: 99 ==> 98) (fan3: 99 ==> 98)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:34:43] ===>[find.goldshell.com/api/miners:443] {
 [2023-05-10 14:34:43]  "miner": "Goldshell-KD5",
 [2023-05-10 14:34:43]  "MAC": "28:E2:97:5C:31:02",
 [2023-05-10 14:34:43]  "IP": "192.168.8.189",
 [2023-05-10 14:34:43]  "SN": "SN-unknown"
 [2023-05-10 14:34:43] }
 [2023-05-10 14:34:45] <===[find.goldshell.com] Recv [{"status":"ok"}]
 [2023-05-10 14:34:45] Failed to get temperatures!!
 [2023-05-10 14:34:45] Fans Change (fan0: 98 ==> 97) (fan1: 98 ==> 97) (fan2: 98 ==> 97) (fan3: 98 ==> 97)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:34:48] Websocket Manager: Pools Status Websocket
 [2023-05-10 14:34:48] ======> mcb_websocket_manager_callback, wait
 [2023-05-10 14:34:48] temp_target is not array
 [2023-05-10 14:34:51] Failed to get temperatures!!
 [2023-05-10 14:34:51] Fans Change (fan0: 97 ==> 96) (fan1: 97 ==> 96) (fan2: 97 ==> 96) (fan3: 97 ==> 96)  reason(t:32.440000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:34:57] Failed to get temperatures!!
 [2023-05-10 14:34:57] Fans Change (fan0: 96 ==> 95) (fan1: 96 ==> 95) (fan2: 96 ==> 95) (fan3: 96 ==> 95)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:03] Failed to get temperatures!!
 [2023-05-10 14:35:03] Fans Change (fan0: 95 ==> 94) (fan1: 95 ==> 94) (fan2: 95 ==> 94) (fan3: 95 ==> 94)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:05] mhs 0.000000
 [2023-05-10 14:35:09] Failed to get temperatures!!
 [2023-05-10 14:35:09] Fans Change (fan0: 94 ==> 93) (fan1: 94 ==> 93) (fan2: 94 ==> 93) (fan3: 94 ==> 93)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:15] Failed to get temperatures!!
 [2023-05-10 14:35:15] Fans Change (fan0: 93 ==> 92) (fan1: 93 ==> 92) (fan2: 93 ==> 92) (fan3: 93 ==> 92)  reason(t:32.380000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:35:21] Failed to get temperatures!!
 [2023-05-10 14:35:21] Fans Change (fan0: 92 ==> 91) (fan1: 92 ==> 91) (fan2: 92 ==> 91) (fan3: 92 ==> 91)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:27] Failed to get temperatures!!
 [2023-05-10 14:35:27] Fans Change (fan0: 91 ==> 90) (fan1: 91 ==> 90) (fan2: 91 ==> 90) (fan3: 91 ==> 90)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:33] Failed to get temperatures!!
 [2023-05-10 14:35:33] Fans Change (fan0: 90 ==> 89) (fan1: 90 ==> 89) (fan2: 90 ==> 89) (fan3: 90 ==> 89)  reason(t:32.440000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:35:39] Failed to get temperatures!!
 [2023-05-10 14:35:39] Fans Change (fan0: 89 ==> 88) (fan1: 89 ==> 88) (fan2: 89 ==> 88) (fan3: 89 ==> 88)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:45] Failed to get temperatures!!
 [2023-05-10 14:35:45] Fans Change (fan0: 88 ==> 87) (fan1: 88 ==> 87) (fan2: 88 ==> 87) (fan3: 88 ==> 87)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:35:51] Failed to get temperatures!!
 [2023-05-10 14:35:51] Fans Change (fan0: 87 ==> 86) (fan1: 87 ==> 86) (fan2: 87 ==> 86) (fan3: 87 ==> 86)  reason(t:32.500000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:35:57] Failed to get temperatures!!
 [2023-05-10 14:35:57] Fans Change (fan0: 86 ==> 85) (fan1: 86 ==> 85) (fan2: 86 ==> 85) (fan3: 86 ==> 85)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:03] Failed to get temperatures!!
 [2023-05-10 14:36:03] Fans Change (fan0: 85 ==> 84) (fan1: 85 ==> 84) (fan2: 85 ==> 84) (fan3: 85 ==> 84)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:05] mhs 0.000000
 [2023-05-10 14:36:09] Failed to get temperatures!!
 [2023-05-10 14:36:09] Fans Change (fan0: 84 ==> 83) (fan1: 84 ==> 83) (fan2: 84 ==> 83) (fan3: 84 ==> 83)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:16] Failed to get temperatures!!
 [2023-05-10 14:36:16] Fans Change (fan0: 83 ==> 82) (fan1: 83 ==> 82) (fan2: 83 ==> 82) (fan3: 83 ==> 82)  reason(t:32.440000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:36:22] Failed to get temperatures!!
 [2023-05-10 14:36:22] Fans Change (fan0: 82 ==> 81) (fan1: 82 ==> 81) (fan2: 82 ==> 81) (fan3: 82 ==> 81)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:28] Failed to get temperatures!!
 [2023-05-10 14:36:28] Fans Change (fan0: 81 ==> 80) (fan1: 81 ==> 80) (fan2: 81 ==> 80) (fan3: 81 ==> 80)  reason(t:32.380000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:36:34] Failed to get temperatures!!
 [2023-05-10 14:36:34] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:40] Failed to get temperatures!!
 [2023-05-10 14:36:40] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:46] Failed to get temperatures!!
 [2023-05-10 14:36:46] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:52] Failed to get temperatures!!
 [2023-05-10 14:36:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:36:58] Failed to get temperatures!!
 [2023-05-10 14:36:58] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:04] Failed to get temperatures!!
 [2023-05-10 14:37:04] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:06] mhs 0.000000
 [2023-05-10 14:37:10] Failed to get temperatures!!
 [2023-05-10 14:37:10] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:16] Failed to get temperatures!!
 [2023-05-10 14:37:16] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:22] Failed to get temperatures!!
 [2023-05-10 14:37:22] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:26] file /root/mineros-version can not access
 [2023-05-10 14:37:26] Get File /root/mineros-version Error
 [2023-05-10 14:37:28] Failed to get temperatures!!
 [2023-05-10 14:37:28] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:34] Failed to get temperatures!!
 [2023-05-10 14:37:34] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:37:40] Failed to get temperatures!!
 [2023-05-10 14:37:40] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:46] Failed to get temperatures!!
 [2023-05-10 14:37:46] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:52] Get Status
 [2023-05-10 14:37:52] Failed to get temperatures!!
 [2023-05-10 14:37:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:37:52] Get MCB Barcode Error
 [2023-05-10 14:37:52] Get Hardware Version Error
 [2023-05-10 14:37:52] {
 [2023-05-10 14:37:52]  "hardware": "xx.xx.SA",
 [2023-05-10 14:37:52]  "model": "Goldshell-KD5",
 [2023-05-10 14:37:52]  "mcbversion": "MCB_V3_3",
 [2023-05-10 14:37:52]  "firmware": "2.1.5"
 [2023-05-10 14:37:52] }
 [2023-05-10 14:37:58] Failed to get temperatures!!
 [2023-05-10 14:37:58] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:04] Failed to get temperatures!!
 [2023-05-10 14:38:04] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:06] mhs 0.000000
 [2023-05-10 14:38:10] Failed to get temperatures!!
 [2023-05-10 14:38:10] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.070000) target_temp:71°C
 [2023-05-10 14:38:16] Failed to get temperatures!!
 [2023-05-10 14:38:16] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:22] Failed to get temperatures!!
 [2023-05-10 14:38:22] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:38:29] Failed to get temperatures!!
 [2023-05-10 14:38:29] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:35] Failed to get temperatures!!
 [2023-05-10 14:38:35] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:41] Failed to get temperatures!!
 [2023-05-10 14:38:41] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:47] Failed to get temperatures!!
 [2023-05-10 14:38:47] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:53] Failed to get temperatures!!
 [2023-05-10 14:38:53] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:38:59] Failed to get temperatures!!
 [2023-05-10 14:38:59] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:05] Failed to get temperatures!!
 [2023-05-10 14:39:05] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:07] mhs 0.000000
 [2023-05-10 14:39:11] Failed to get temperatures!!
 [2023-05-10 14:39:11] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.500000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:39:17] Failed to get temperatures!!
 [2023-05-10 14:39:17] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:23] Failed to get temperatures!!
 [2023-05-10 14:39:23] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:29] Failed to get temperatures!!
 [2023-05-10 14:39:29] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:35] Failed to get temperatures!!
 [2023-05-10 14:39:35] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:41] Failed to get temperatures!!
 [2023-05-10 14:39:41] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:47] Failed to get temperatures!!
 [2023-05-10 14:39:47] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:39:53] Failed to get temperatures!!
 [2023-05-10 14:39:53] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:39:59] Failed to get temperatures!!
 [2023-05-10 14:39:59] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:40:05] Failed to get temperatures!!
 [2023-05-10 14:40:05] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:07] mhs 0.000000
 [2023-05-10 14:40:11] Failed to get temperatures!!
 [2023-05-10 14:40:11] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:40:17] Failed to get temperatures!!
 [2023-05-10 14:40:17] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:23] Failed to get temperatures!!
 [2023-05-10 14:40:23] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:29] Failed to get temperatures!!
 [2023-05-10 14:40:29] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:35] Failed to get temperatures!!
 [2023-05-10 14:40:35] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:41] Failed to get temperatures!!
 [2023-05-10 14:40:41] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:48] Failed to get temperatures!!
 [2023-05-10 14:40:48] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:40:54] Failed to get temperatures!!
 [2023-05-10 14:40:54] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:00] Failed to get temperatures!!
 [2023-05-10 14:41:00] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:06] Failed to get temperatures!!
 [2023-05-10 14:41:06] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.250000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:41:08] mhs 0.000000
 [2023-05-10 14:41:12] Failed to get temperatures!!
 [2023-05-10 14:41:12] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:18] Failed to get temperatures!!
 [2023-05-10 14:41:18] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.190000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:41:24] Failed to get temperatures!!
 [2023-05-10 14:41:24] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.190000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:30] Failed to get temperatures!!
 [2023-05-10 14:41:30] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:41:36] Failed to get temperatures!!
 [2023-05-10 14:41:36] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:42] Failed to get temperatures!!
 [2023-05-10 14:41:42] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:48] Failed to get temperatures!!
 [2023-05-10 14:41:48] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:41:54] Failed to get temperatures!!
 [2023-05-10 14:41:54] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:00] Failed to get temperatures!!
 [2023-05-10 14:42:00] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:06] Failed to get temperatures!!
 [2023-05-10 14:42:06] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.130000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:08] mhs 0.000000
 [2023-05-10 14:42:12] Failed to get temperatures!!
 [2023-05-10 14:42:12] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.060000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:42:18] Failed to get temperatures!!
 [2023-05-10 14:42:18] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.060000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:24] Failed to get temperatures!!
 [2023-05-10 14:42:24] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.060000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:30] Failed to get temperatures!!
 [2023-05-10 14:42:30] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.000000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:42:36] Failed to get temperatures!!
 [2023-05-10 14:42:36] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:32.000000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:42] Failed to get temperatures!!
 [2023-05-10 14:42:42] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.940000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:42:48] Failed to get temperatures!!
 [2023-05-10 14:42:48] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.940000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:42:54] Failed to get temperatures!!
 [2023-05-10 14:42:54] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.880000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:43:00] Failed to get temperatures!!
 [2023-05-10 14:43:00] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.880000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:43:07] Failed to get temperatures!!
 [2023-05-10 14:43:07] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.810000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:43:09] mhs 0.000000
 [2023-05-10 14:43:13] Failed to get temperatures!!
 [2023-05-10 14:43:13] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.750000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:43:19] Failed to get temperatures!!
 [2023-05-10 14:43:19] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:43:25] Failed to get temperatures!!
 [2023-05-10 14:43:25] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:43:31] Failed to get temperatures!!
 [2023-05-10 14:43:31] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:43:37] Failed to get temperatures!!
 [2023-05-10 14:43:37] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:43:43] Failed to get temperatures!!
 [2023-05-10 14:43:43] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:43:49] Failed to get temperatures!!
 [2023-05-10 14:43:49] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:43:55] Failed to get temperatures!!
 [2023-05-10 14:43:55] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:44:01] Failed to get temperatures!!
 [2023-05-10 14:44:01] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:44:07] Failed to get temperatures!!
 [2023-05-10 14:44:07] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:44:09] mhs 0.000000
 [2023-05-10 14:44:13] Failed to get temperatures!!
 [2023-05-10 14:44:13] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:44:19] Failed to get temperatures!!
 [2023-05-10 14:44:19] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:44:25] Failed to get temperatures!!
 [2023-05-10 14:44:25] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:44:31] Failed to get temperatures!!
 [2023-05-10 14:44:31] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:44:37] Failed to get temperatures!!
 [2023-05-10 14:44:37] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:44:43] Failed to get temperatures!!
 [2023-05-10 14:44:43] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:44:49] Failed to get temperatures!!
 [2023-05-10 14:44:49] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:44:55] Failed to get temperatures!!
 [2023-05-10 14:44:55] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:45:01] Failed to get temperatures!!
 [2023-05-10 14:45:01] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:45:07] Failed to get temperatures!!
 [2023-05-10 14:45:07] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:45:09] mhs 0.000000
 [2023-05-10 14:45:13] Failed to get temperatures!!
 [2023-05-10 14:45:13] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:45:19] Failed to get temperatures!!
 [2023-05-10 14:45:19] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:45:26] Failed to get temperatures!!
 [2023-05-10 14:45:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.070000) target_temp:71°C
 [2023-05-10 14:45:32] Failed to get temperatures!!
 [2023-05-10 14:45:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:45:38] Failed to get temperatures!!
 [2023-05-10 14:45:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:45:44] Failed to get temperatures!!
 [2023-05-10 14:45:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:45:50] Failed to get temperatures!!
 [2023-05-10 14:45:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:45:56] Failed to get temperatures!!
 [2023-05-10 14:45:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:46:02] Failed to get temperatures!!
 [2023-05-10 14:46:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:46:08] Failed to get temperatures!!
 [2023-05-10 14:46:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.250000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:46:09] mhs 0.000000
 [2023-05-10 14:46:14] Failed to get temperatures!!
 [2023-05-10 14:46:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:46:20] Failed to get temperatures!!
 [2023-05-10 14:46:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:46:26] Failed to get temperatures!!
 [2023-05-10 14:46:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.070000) target_temp:71°C
 [2023-05-10 14:46:32] Failed to get temperatures!!
 [2023-05-10 14:46:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:46:38] Failed to get temperatures!!
 [2023-05-10 14:46:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:46:44] Failed to get temperatures!!
 [2023-05-10 14:46:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:46:50] Failed to get temperatures!!
 [2023-05-10 14:46:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:46:56] Failed to get temperatures!!
 [2023-05-10 14:46:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:47:02] Failed to get temperatures!!
 [2023-05-10 14:47:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:47:08] Failed to get temperatures!!
 [2023-05-10 14:47:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:47:09] mhs 0.000000
 [2023-05-10 14:47:14] Failed to get temperatures!!
 [2023-05-10 14:47:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:47:20] Failed to get temperatures!!
 [2023-05-10 14:47:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:47:26] Failed to get temperatures!!
 [2023-05-10 14:47:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:47:32] Failed to get temperatures!!
 [2023-05-10 14:47:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:47:38] Failed to get temperatures!!
 [2023-05-10 14:47:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.070000) target_temp:71°C
 [2023-05-10 14:47:44] Failed to get temperatures!!
 [2023-05-10 14:47:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:47:50] Failed to get temperatures!!
 [2023-05-10 14:47:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:47:56] Failed to get temperatures!!
 [2023-05-10 14:47:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:02] Failed to get temperatures!!
 [2023-05-10 14:48:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:08] Failed to get temperatures!!
 [2023-05-10 14:48:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:48:10] mhs 0.000000
 [2023-05-10 14:48:14] Failed to get temperatures!!
 [2023-05-10 14:48:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:20] Failed to get temperatures!!
 [2023-05-10 14:48:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:26] Failed to get temperatures!!
 [2023-05-10 14:48:26] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:32] Failed to get temperatures!!
 [2023-05-10 14:48:32] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:38] Failed to get temperatures!!
 [2023-05-10 14:48:38] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:44] Failed to get temperatures!!
 [2023-05-10 14:48:44] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:50] Failed to get temperatures!!
 [2023-05-10 14:48:50] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:48:56] Failed to get temperatures!!
 [2023-05-10 14:48:56] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.690000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:49:02] Failed to get temperatures!!
 [2023-05-10 14:49:02] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:49:08] Failed to get temperatures!!
 [2023-05-10 14:49:08] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.630000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:10] mhs 0.000000
 [2023-05-10 14:49:14] Failed to get temperatures!!
 [2023-05-10 14:49:14] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:49:20] Failed to get temperatures!!
 [2023-05-10 14:49:20] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:27] Failed to get temperatures!!
 [2023-05-10 14:49:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:33] Failed to get temperatures!!
 [2023-05-10 14:49:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:39] Failed to get temperatures!!
 [2023-05-10 14:49:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:45] Failed to get temperatures!!
 [2023-05-10 14:49:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:51] Failed to get temperatures!!
 [2023-05-10 14:49:51] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:49:57] Failed to get temperatures!!
 [2023-05-10 14:49:57] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.560000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:03] Failed to get temperatures!!
 [2023-05-10 14:50:03] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:50:09] Failed to get temperatures!!
 [2023-05-10 14:50:09] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:10] mhs 0.000000
 [2023-05-10 14:50:15] Failed to get temperatures!!
 [2023-05-10 14:50:15] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:21] Failed to get temperatures!!
 [2023-05-10 14:50:21] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:50:27] Failed to get temperatures!!
 [2023-05-10 14:50:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:33] Failed to get temperatures!!
 [2023-05-10 14:50:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:39] Failed to get temperatures!!
 [2023-05-10 14:50:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:45] Failed to get temperatures!!
 [2023-05-10 14:50:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:51] Failed to get temperatures!!
 [2023-05-10 14:50:51] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:50:57] Failed to get temperatures!!
 [2023-05-10 14:50:57] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:51:03] Failed to get temperatures!!
 [2023-05-10 14:51:03] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:09] Failed to get temperatures!!
 [2023-05-10 14:51:09] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:10] mhs 0.000000
 [2023-05-10 14:51:15] Failed to get temperatures!!
 [2023-05-10 14:51:15] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.500000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:21] Failed to get temperatures!!
 [2023-05-10 14:51:21] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:51:27] Failed to get temperatures!!
 [2023-05-10 14:51:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:33] Failed to get temperatures!!
 [2023-05-10 14:51:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:51:39] Failed to get temperatures!!
 [2023-05-10 14:51:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:45] Failed to get temperatures!!
 [2023-05-10 14:51:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:51] Failed to get temperatures!!
 [2023-05-10 14:51:51] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:51:57] Failed to get temperatures!!
 [2023-05-10 14:51:57] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:03] Failed to get temperatures!!
 [2023-05-10 14:52:03] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:09] Failed to get temperatures!!
 [2023-05-10 14:52:09] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:10] mhs 0.000000
 [2023-05-10 14:52:15] Failed to get temperatures!!
 [2023-05-10 14:52:15] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:21] Failed to get temperatures!!
 [2023-05-10 14:52:21] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:27] Failed to get temperatures!!
 [2023-05-10 14:52:27] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:33] Failed to get temperatures!!
 [2023-05-10 14:52:33] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:39] Failed to get temperatures!!
 [2023-05-10 14:52:39] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:-0.070000) target_temp:71°C
 [2023-05-10 14:52:45] Failed to get temperatures!!
 [2023-05-10 14:52:45] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:52] Failed to get temperatures!!
 [2023-05-10 14:52:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:52:58] Failed to get temperatures!!
 [2023-05-10 14:52:58] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:53:04] Failed to get temperatures!!
 [2023-05-10 14:53:04] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:53:10] Failed to get temperatures!!
 [2023-05-10 14:53:10] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:53:11] mhs 0.000000
 [2023-05-10 14:53:16] Failed to get temperatures!!
 [2023-05-10 14:53:16] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.310000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:53:22] Failed to get temperatures!!
 [2023-05-10 14:53:22] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.070000) target_temp:71°C
 [2023-05-10 14:53:28] Failed to get temperatures!!
 [2023-05-10 14:53:28] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:53:34] Failed to get temperatures!!
 [2023-05-10 14:53:34] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C
 [2023-05-10 14:53:40] Failed to get temperatures!!
 [2023-05-10 14:53:40] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.440000 acc:0.060000) target_temp:71°C
 [2023-05-10 14:53:46] Failed to get temperatures!!
 [2023-05-10 14:53:46] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:-0.060000) target_temp:71°C
 [2023-05-10 14:53:52] Failed to get temperatures!!
 [2023-05-10 14:53:52] Fans Change (fan0: 80 ==> 80) (fan1: 80 ==> 80) (fan2: 80 ==> 80) (fan3: 80 ==> 80)  reason(t:31.380000 acc:0.000000) target_temp:71°C

        

Hi guys!

I updated the firmware to the newest one. After that it didn`t start to hash anymore. I flashed it back to the older firmware but no success.

What can be wrong?


Thanks in adavnce!