Topic: Goldshell X5 Irregular dashboard giving errors. (Read 60 times)
just tested the single board, failed to startup still.
if the dead board works, how can I run it? separate controller?
https://imgur.com/a/zD1tjwA
Dev0 is the one causing issues, does anyone know what's going on or how to bypass this?
Dev 0 is V-A2, other boards are working V-A3 version boards.
Code:
[2022-02-02 07:27:11] Dev0 spi-(1,/dev/spidev1.0) led-cpb0, plug-114, ctrl-(67,66) dcdc-(14,45,50) ts-(0, 48)
[2022-02-02 07:27:11] Dev1 spi-(1,/dev/spidev1.1) led-cpb1, plug-115, ctrl-(83,82) dcdc-(44,51,79) ts-(1, 48)
[2022-02-02 07:27:11] Dev2 spi-(2,/dev/spidev2.0) led-cpb2, plug-152, ctrl-(63,62) dcdc-(15,27,80) ts-(2, 48)
[2022-02-02 07:27:11] Dev3 spi-(2,/dev/spidev2.1) led-cpb3, plug-145, ctrl-(65,64) dcdc-(43,52,53) ts-(3, 48)
[2022-02-02 07:27:11] Qomo driver parse succeed
[2022-02-02 07:27:11] Qomo Miner detected, 4 chains totally!
[2022-02-02 07:27:11] Probing for an alive pool
[2022-02-02 07:27:11] ====>Pool 0 stratum difficulty set to 131072.000000
[2022-02-02 07:27:11] Pool 0 stratum difficulty set to 2
[2022-02-02 07:27:12] Pool 0 stratum+tcp://prohashing.com:3333 alive
[2022-02-02 07:27:12] ====>Pool 0 stratum difficulty set to 262144.000000
[2022-02-02 07:27:12] Pool 0 stratum difficulty set to 4
[2022-02-02 07:27:12] Network difficulty changed to 13.4M (96.27T)
[2022-02-02 07:27:12] Stratum from pool 0 detected new block
[2022-02-02 07:27:12] Pool 0 is hiding block contents from us
[2022-02-02 07:27:12] ICQ510 dev0: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev1: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev2: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev3: Thread init 0
[2022-02-02 07:27:12] API running in IP access mode on port 4028
[2022-02-02 07:27:12] Qomo dev init 1
[2022-02-02 07:27:12] Qomo dev init 3
[2022-02-02 07:27:12] Qomo dev init 0
[2022-02-02 07:27:12] Qomo dev init 2
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:11] Dev1 spi-(1,/dev/spidev1.1) led-cpb1, plug-115, ctrl-(83,82) dcdc-(44,51,79) ts-(1, 48)
[2022-02-02 07:27:11] Dev2 spi-(2,/dev/spidev2.0) led-cpb2, plug-152, ctrl-(63,62) dcdc-(15,27,80) ts-(2, 48)
[2022-02-02 07:27:11] Dev3 spi-(2,/dev/spidev2.1) led-cpb3, plug-145, ctrl-(65,64) dcdc-(43,52,53) ts-(3, 48)
[2022-02-02 07:27:11] Qomo driver parse succeed
[2022-02-02 07:27:11] Qomo Miner detected, 4 chains totally!
[2022-02-02 07:27:11] Probing for an alive pool
[2022-02-02 07:27:11] ====>Pool 0 stratum difficulty set to 131072.000000
[2022-02-02 07:27:11] Pool 0 stratum difficulty set to 2
[2022-02-02 07:27:12] Pool 0 stratum+tcp://prohashing.com:3333 alive
[2022-02-02 07:27:12] ====>Pool 0 stratum difficulty set to 262144.000000
[2022-02-02 07:27:12] Pool 0 stratum difficulty set to 4
[2022-02-02 07:27:12] Network difficulty changed to 13.4M (96.27T)
[2022-02-02 07:27:12] Stratum from pool 0 detected new block
[2022-02-02 07:27:12] Pool 0 is hiding block contents from us
[2022-02-02 07:27:12] ICQ510 dev0: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev1: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev2: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev3: Thread init 0
[2022-02-02 07:27:12] API running in IP access mode on port 4028
[2022-02-02 07:27:12] Qomo dev init 1
[2022-02-02 07:27:12] Qomo dev init 3
[2022-02-02 07:27:12] Qomo dev init 0
[2022-02-02 07:27:12] Qomo dev init 2
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
Dev0 is the one causing issues, does anyone know what's going on or how to bypass this?
Dev 0 is V-A2, other boards are working V-A3 version boards.
this is a LTC/Doge miner the thread should be in alt coins I will ask the mods to move it.
so lets make this guess.
Pull the three good boards. just run the dead one.
boot it 3 times 1 minute. about to clear all caches.
see if the dead board works.
if it works it may mean you can not mix boards on same controller.
https://imgur.com/a/zD1tjwA
Dev0 is the one causing issues, does anyone know what's going on or how to bypass this?
Dev 0 is V-A2, other boards are working V-A3 version boards.
Code:
[2022-02-02 07:27:11] Dev0 spi-(1,/dev/spidev1.0) led-cpb0, plug-114, ctrl-(67,66) dcdc-(14,45,50) ts-(0, 48)
[2022-02-02 07:27:11] Dev1 spi-(1,/dev/spidev1.1) led-cpb1, plug-115, ctrl-(83,82) dcdc-(44,51,79) ts-(1, 48)
[2022-02-02 07:27:11] Dev2 spi-(2,/dev/spidev2.0) led-cpb2, plug-152, ctrl-(63,62) dcdc-(15,27,80) ts-(2, 48)
[2022-02-02 07:27:11] Dev3 spi-(2,/dev/spidev2.1) led-cpb3, plug-145, ctrl-(65,64) dcdc-(43,52,53) ts-(3, 48)
[2022-02-02 07:27:11] Qomo driver parse succeed
[2022-02-02 07:27:11] Qomo Miner detected, 4 chains totally!
[2022-02-02 07:27:11] Probing for an alive pool
[2022-02-02 07:27:11] ====>Pool 0 stratum difficulty set to 131072.000000
[2022-02-02 07:27:11] Pool 0 stratum difficulty set to 2
[2022-02-02 07:27:12] Pool 0 stratum+tcp://prohashing.com:3333 alive
[2022-02-02 07:27:12] ====>Pool 0 stratum difficulty set to 262144.000000
[2022-02-02 07:27:12] Pool 0 stratum difficulty set to 4
[2022-02-02 07:27:12] Network difficulty changed to 13.4M (96.27T)
[2022-02-02 07:27:12] Stratum from pool 0 detected new block
[2022-02-02 07:27:12] Pool 0 is hiding block contents from us
[2022-02-02 07:27:12] ICQ510 dev0: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev1: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev2: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev3: Thread init 0
[2022-02-02 07:27:12] API running in IP access mode on port 4028
[2022-02-02 07:27:12] Qomo dev init 1
[2022-02-02 07:27:12] Qomo dev init 3
[2022-02-02 07:27:12] Qomo dev init 0
[2022-02-02 07:27:12] Qomo dev init 2
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:11] Dev1 spi-(1,/dev/spidev1.1) led-cpb1, plug-115, ctrl-(83,82) dcdc-(44,51,79) ts-(1, 48)
[2022-02-02 07:27:11] Dev2 spi-(2,/dev/spidev2.0) led-cpb2, plug-152, ctrl-(63,62) dcdc-(15,27,80) ts-(2, 48)
[2022-02-02 07:27:11] Dev3 spi-(2,/dev/spidev2.1) led-cpb3, plug-145, ctrl-(65,64) dcdc-(43,52,53) ts-(3, 48)
[2022-02-02 07:27:11] Qomo driver parse succeed
[2022-02-02 07:27:11] Qomo Miner detected, 4 chains totally!
[2022-02-02 07:27:11] Probing for an alive pool
[2022-02-02 07:27:11] ====>Pool 0 stratum difficulty set to 131072.000000
[2022-02-02 07:27:11] Pool 0 stratum difficulty set to 2
[2022-02-02 07:27:12] Pool 0 stratum+tcp://prohashing.com:3333 alive
[2022-02-02 07:27:12] ====>Pool 0 stratum difficulty set to 262144.000000
[2022-02-02 07:27:12] Pool 0 stratum difficulty set to 4
[2022-02-02 07:27:12] Network difficulty changed to 13.4M (96.27T)
[2022-02-02 07:27:12] Stratum from pool 0 detected new block
[2022-02-02 07:27:12] Pool 0 is hiding block contents from us
[2022-02-02 07:27:12] ICQ510 dev0: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev1: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev2: Thread init 0
[2022-02-02 07:27:12] ICQ510 dev3: Thread init 0
[2022-02-02 07:27:12] API running in IP access mode on port 4028
[2022-02-02 07:27:12] Qomo dev init 1
[2022-02-02 07:27:12] Qomo dev init 3
[2022-02-02 07:27:12] Qomo dev init 0
[2022-02-02 07:27:12] Qomo dev init 2
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
[2022-02-02 07:27:13] prep::
[2022-02-02 07:27:13] a5 3c 02 00 00 01 00 00
[2022-02-02 07:27:13] echo::
[2022-02-02 07:27:13] 00 00 00 00 00 00 00 00
[2022-02-02 07:27:13] ICQ510 dev0: unexpected echo for cmd 0x0200
Dev0 is the one causing issues, does anyone know what's going on or how to bypass this?
Dev 0 is V-A2, other boards are working V-A3 version boards.
Jump to: