Hi guys, I somehow managed to boot it, it was TV issue.
But I have issue with GPU as BAMT screen went red and I got message: A fault has been detected on GPU 0. How can I troubleshoot this?
And also one quick question, I got R9 270x cards but while BAMT is on it reads:
GPUs Detected
0 01:00 0 AMD Radeon R9 200 Series
Is that normal?
Topic: Got 1st rig. Need a bit of help on setup, cards and risers? (Read 6993 times)
I would go with 4 powered usb risers. I purchased 5 off of a guy from ebay for $20 each. Kind of high but they are well worth it. Easier to route cables and the mb sees the cards immediately. I would also go with an open case. Richard sells really nice open cases.
http://richchomiczewski.wordpress.com/
How do you even contact this guy? Only per email?http://richchomiczewski.wordpress.com/
I contacted him before buying one through openrigs.com he refused to make one for me because he claimed that he's backlogged. It's Feb. so now things may be different. I wouldn't have ordered one through openrigs if I would have known that they would take Forever to ship my unit.
Quote
12-10-2013
Regrettably, I cannot accept any new orders at this time.
The recent flood of orders has greatly exceeded my manufacturing capacity.
I will resume taking orders as soon as my backlog is reduced to an acceptable level (2-3 weeks). A small re-design of the “mining tray” product is now under way to reduce manufacturing time (and therefore cost to you). Along with some capital investments and streamlining of production, I’m confident that I will be able to meet demand in the very near future.
I am grateful for the overwhelming, enthusiastic response to my products and I look forward to fulfilling all my customer’s requests just as soon as the production schedule permits.
Regrettably, I cannot accept any new orders at this time.
The recent flood of orders has greatly exceeded my manufacturing capacity.
I will resume taking orders as soon as my backlog is reduced to an acceptable level (2-3 weeks). A small re-design of the “mining tray” product is now under way to reduce manufacturing time (and therefore cost to you). Along with some capital investments and streamlining of production, I’m confident that I will be able to meet demand in the very near future.
I am grateful for the overwhelming, enthusiastic response to my products and I look forward to fulfilling all my customer’s requests just as soon as the production schedule permits.
Thanks guys.
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
Go into BIOS and select your USB stick as primary boot device.
Also I tried connecting my graphic card to regular monitor with this kind of in, and it cant fit..
http://upload.wikimedia.org/wikipedia/commons/4/4f/DVI-VGA-Adapter.jpg
do only new monitors have such input? Or there are some kind of connectors?
http://www.sudcamp.com/wp-content/uploads/2012/08/dvi_d_socket.jpg
I don't see what else is an issue, it turns on, restarts, gives Gigabyte splashscreen, but I cant enter boot setup to set USB as primary? :S
Then I've got no idea, sorry.
I would go with 4 powered usb risers. I purchased 5 off of a guy from ebay for $20 each. Kind of high but they are well worth it. Easier to route cables and the mb sees the cards immediately. I would also go with an open case. Richard sells really nice open cases.
http://richchomiczewski.wordpress.com/
How do you even contact this guy? Only per email? http://richchomiczewski.wordpress.com/
Thanks guys.
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
Go into BIOS and select your USB stick as primary boot device.
Also I tried connecting my graphic card to regular monitor with this kind of in, and it cant fit..
http://upload.wikimedia.org/wikipedia/commons/4/4f/DVI-VGA-Adapter.jpg
do only new monitors have such input? Or there are some kind of connectors?
http://www.sudcamp.com/wp-content/uploads/2012/08/dvi_d_socket.jpg
I don't see what else is an issue, it turns on, restarts, gives Gigabyte splashscreen, but I cant enter boot setup to set USB as primary? :S
+1 for usb risers, also better do open frame rig, nothing limits you more than not enough room for fresh air.
Thanks guys.
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
Go into BIOS and select your USB stick as primary boot device.
4 GPU nice 
good-luck!
good-luck!
Thanks guys.
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
But I can't get it to boot, I see splash screen and then its black. I am connecting it to TV via HDMI cable,could this be an issue?
My keyboard has green light, and I tried various ports, DEL/F12/F9/F2 before/during/after splashscreen but nothing gets me into boot options.
I have USB stick with BAMT on it. Does anyone has idea what could be the issue?
Hi guys,
I am trying to get going on first card, could anyone help with overview of cables if I set up them up correctly?
http://postimg.org/image/vcq5ev5q1/full/
I am trying to get going on first card, could anyone help with overview of cables if I set up them up correctly?
http://postimg.org/image/vcq5ev5q1/full/
Looks like you've got it correct
RickJames, we pm-ed if You remembered, You were out of stock, and I've ordered, but will be buying some more soon so thanks.
SheepOnDrugs, thanks.
SheepOnDrugs, thanks.
Most people are getting usb risers from me, and I'll ship anywhere in the world.
GPUs are getting hard to find right now. Just buy the cheapest R9 cards you can get, and as many as you can afford.
GPUs are getting hard to find right now. Just buy the cheapest R9 cards you can get, and as many as you can afford.
Looks fine.
Hi guys,
I am trying to get going on first card, could anyone help with overview of cables if I set up them up correctly?
http://postimg.org/image/vcq5ev5q1/full/
I am trying to get going on first card, could anyone help with overview of cables if I set up them up correctly?
http://postimg.org/image/vcq5ev5q1/full/
Thanks, and what about fans?
And power, is 1050W enough for this rig?
And power, is 1050W enough for this rig?
I would have gone with a quad x-fire/sli board, these carry enough power through the PCI-E and the risers wont need to be powered. You might get away with 2x powered and 2x non-powered risers.
I bought 4 risers from ebay and they are working brilliantly. Never tried alibaba so can't recommend.
When buying risers, make sure to buy the right ones like 1x, 4x and 16x (depending on the available pci slots)
When buying risers, make sure to buy the right ones like 1x, 4x and 16x (depending on the available pci slots)
The only thing I know where you can get them cheap is alibaba.com
I am also looking for cheaper ones outside eBay in Europe, so I'd appreciate an answer too.
I am also looking for cheaper ones outside eBay in Europe, so I'd appreciate an answer too.
Ok, thanks.
Any chance You know where to buy them in Europe without PayPal? My country doesnt have it, and they seem to be only on ebay.
Any chance You know where to buy them in Europe without PayPal? My country doesnt have it, and they seem to be only on ebay.
I would go with 4 powered usb risers. I purchased 5 off of a guy from ebay for $20 each. Kind of high but they are well worth it. Easier to route cables and the mb sees the cards immediately. I would also go with an open case. Richard sells really nice open cases.
http://richchomiczewski.wordpress.com/
http://richchomiczewski.wordpress.com/
I've just bought my first mining rig, and I need help a bit of help:
- how to setup cards/risers? Which types? How many powered/non powered? USB risers or not?
- do I need cooler for CPU? Passive cooling for rig? Small or large ones? (I will test it, but like a guideline?)
4x ASUS Radeon R9 270X DirectCU II
http://www.asus.com/Graphics_Cards/R9270XDC2T2GD5/
1x GA-990FXA-UD3 rev.4.0
http://www.gigabyte.com/products/product-page.aspx?pid=4672#ov
1x AMD FX-6300
http://en.wikipedia.org/wiki/List_of_AMD_FX_microprocessors
1x Kingston 8GB
1x Kingston 32GB Flash
1x Chieftech 1050W PSU.
I planned to follow designs of (sort of), would You suggest anything better:
https://bitcointalksearch.org/topic/--7216
https://bitcointalksearch.org/topic/--7216
https://bitcointalksearch.org/topic/--7216
What do You think of setup? And what to do to make most out of it?
I know its nothing special, and PSU could be better but its a start. I might process some data with it, thats why I got 8GB and avg AMD.
Would appreciate a bit of feedback as I am overwhelmed with all the info and sorts of tech.
- how to setup cards/risers? Which types? How many powered/non powered? USB risers or not?
- do I need cooler for CPU? Passive cooling for rig? Small or large ones? (I will test it, but like a guideline?)
4x ASUS Radeon R9 270X DirectCU II
http://www.asus.com/Graphics_Cards/R9270XDC2T2GD5/
1x GA-990FXA-UD3 rev.4.0
http://www.gigabyte.com/products/product-page.aspx?pid=4672#ov
1x AMD FX-6300
http://en.wikipedia.org/wiki/List_of_AMD_FX_microprocessors
1x Kingston 8GB
1x Kingston 32GB Flash
1x Chieftech 1050W PSU.
I planned to follow designs of (sort of), would You suggest anything better:
https://bitcointalksearch.org/topic/--7216
https://bitcointalksearch.org/topic/--7216
https://bitcointalksearch.org/topic/--7216
What do You think of setup? And what to do to make most out of it?
I know its nothing special, and PSU could be better but its a start. I might process some data with it, thats why I got 8GB and avg AMD.
Would appreciate a bit of feedback as I am overwhelmed with all the info and sorts of tech.
Jump to: