#1 - you don't have all fixes installed if you've got phoenix 1.6.2
#2 - something is wrong with networking, you can tell from your screenshot
#3 - na% (na) on gpumon line means X doesn't think you have any card
so, basically you've got a whole lot of mess there. make a new usb key, try again
Topic: Got a problem mining with BAMT. Help is appreciated. (Read 794 times)
Hi all,
I've just tried yesterday to build my second rig on BAMT distro with 2 GPUs (5870+5850). Everything went fine, booted successfully, edited bamt.conf, pools file, but when started mining, gpumon shows only one card running (green color) and the other one is red. Picture attached.
Using phatk.
I have tried to:
- use another PCIexpress slot
- use another card (5770 instead of 5850)
- installed all BAMT fixes
- in aticonfig --list-adapters both GPUs are shown
- when I select second GPU in gpumon I see this (as you can see, the card is not mining at all)
I really sorry, if it was solved somewhere esle already, but I couldn't find a solution.
Thanks for any recommendation.
Cheers.
I've just tried yesterday to build my second rig on BAMT distro with 2 GPUs (5870+5850). Everything went fine, booted successfully, edited bamt.conf, pools file, but when started mining, gpumon shows only one card running (green color) and the other one is red. Picture attached.
Using phatk.
I have tried to:
- use another PCIexpress slot
- use another card (5770 instead of 5850)
- installed all BAMT fixes
- in aticonfig --list-adapters both GPUs are shown
- when I select second GPU in gpumon I see this (as you can see, the card is not mining at all)
I really sorry, if it was solved somewhere esle already, but I couldn't find a solution.
Thanks for any recommendation.
Cheers.
Jump to: