gpu caught fire....options? | Bitcointalksearch.org

paulmaritz

sr. member

Activity: 672

Merit: 274

Quote from: Canadian Sensei on May 17, 2018, 02:35:12 PM

I'll check the numbers when I get home to make sure. Do you know what I should steer clear of with EVGA? I've been told to never mention mining with them because they won't warranty anything that was used for that. Do you think that there is any truth to that?

I don't know, but honesty is the best policy in my opinion. Contact them and be honest about it. They might pleasantly surprise you.

darkangel11

legendary

Activity: 2478

Merit: 1360

Don't let others control your BTC -> self custody

There's a lot of pictures of a similar issue. This guy had a 1080 that caught fire and he was basically doing the same thing. Unplugged the card, plugged it back in, turned it on and it broke.
https://www.youtube.com/watch?v=WAbl0fLY06U
Does it look like this by any chance?

It was discovered that the issue originates from the voltage regulation modules which overheat leading to component failure and MOSFET blow out. The issue affects EVGA’s entire range of Nvidia GeForce GTX 1080 and GTX 1070 cards equipped with the ACX cooler, all of which lack direct VRM cooling. This includes GTX 1080 & 1070 ACX, SC, FTW & FTW DT models. Essentially all dual fan models except the Classified.

You probably had an older model that doesn't have vram cooling, which was causing the overheating of these cards. The later models had thermal pads installed on the ram chips to prevent this. If you have a model with no cooling, RMA it and you should get a new one.

Canadian Sensei

newbie

Activity: 4

Merit: 0

I'll check the numbers when I get home to make sure. Do you know what I should steer clear of with EVGA? I've been told to never mention mining with them because they won't warranty anything that was used for that. Do you think that there is any truth to that?

paulmaritz

sr. member

Activity: 672

Merit: 274

Quote from: Canadian Sensei on May 17, 2018, 02:10:31 PM

Quote from: MintDiceSupport on May 17, 2018, 02:06:13 PM

Seems this was/has been a recurring issue: https://www.pcmag.com/news/349319/evga-patches-graphics-cards-to-stop-them-catching-fire

Might be worth contacting EVGA, it seems they know about this.

Hope this helps.

I saw these articles and they all seem to be from 2016. I'm sure these cards weren't back stock from then.

Have you checked for the part numbers listed in that article? If yours are not listed there, it is very concerning to say the least, because they were supposed to properly address the issue ages ago. That being said, I am sure if you contact them they will make it right. Keep us posted.

Canadian Sensei

newbie

Activity: 4

Merit: 0

Quote from: MintDiceSupport on May 17, 2018, 02:06:13 PM

Seems this was/has been a recurring issue: https://www.pcmag.com/news/349319/evga-patches-graphics-cards-to-stop-them-catching-fire

Might be worth contacting EVGA, it seems they know about this.

Hope this helps.

I saw these articles and they all seem to be from 2016. I'm sure these cards weren't back stock from then.

MintDiceSupport

member

Activity: 154

Merit: 11

MintDice Support

Seems this was/has been a recurring issue: https://www.pcmag.com/news/349319/evga-patches-graphics-cards-to-stop-them-catching-fire

Might be worth contacting EVGA, it seems they know about this.

Hope this helps.

Canadian Sensei

newbie

Activity: 4

Merit: 0

Hey guys,
I have a 6x1070 rig that had 2 gpu's catch fire. The first happened after I shut it down to switch an ethernet cable. When I restarted it, it would not recognize that card. I unhooked the power supply to it, and as I reattached it, flames shot out of the back. I did this with the computer still running (stupid). The second one went out last night. I was just in the room and hear a pop and saw a flame shoot out. I wasn't messing with this one. These 2 cards were on the same line coming out of an 850watt power supply.
When comparing the 2 cards, they are both burnt on the back at the exact same spot. What are your thoughts on getting these warrantied through EVGA since they are only 3 months old? Could this be a power supply issue?
I'm just trying to get this sorted out without the getting too many details to the manufacturer yet.
Thanks

Topic: gpu caught fire....options? (Read 115 times)