Yes this sounds about right. Does anyone know why it is that Nvidia cards are so much worse than ATI?
https://en.bitcoin.it/wiki/Why_a_GPU_mines_faster_than_a_CPU#Why_are_AMD_GPUs_faster_than_Nvidia_GPUs.3F
Topic: GPU for Nvidia cards - help pls (Read 3855 times)
https://en.bitcoin.it/wiki/Why_a_GPU_mines_faster_than_a_CPU#Why_are_AMD_GPUs_faster_than_Nvidia_GPUs.3F
Yes this sounds about right. Does anyone know why it is that Nvidia cards are so much worse than ATI?
GT520 is a pretty low-end card, so yes it seems adequate. Comparable really with the about 13MH/s I was getting with a 9600GT.
ok thx for the information
GT520 is a pretty low-end card, so yes it seems adequate. Comparable really with the about 13MH/s I was getting with a 9600GT.
then it says:
Traceback:
File "poclbm.py", line 48, in
pyopencl.LogicError: clGetPlatformIDs failed: inavild/unknown error code
EDIT: I'm now mining with rpcminer-Cuda 10-11Mhash/s . It's the best i get or can it also be better?
Traceback
File "poclbm.py", line 48, in
pyopencl.LogicError: clGetPlatformIDs failed: inavild/unknown error code
EDIT: I'm now mining with rpcminer-Cuda 10-11Mhash/s . It's the best i get or can it also be better?
from the command line in guiminer type
poclbm.exe
and see what it says - you will probably need to point the device to the card
i.e.
-d1
Use this.poclbm.exe
and see what it says - you will probably need to point the device to the card
i.e.
-d1
If I open poclbm.exe in the guiminer folder it closes itself immediatly after opening...
Run using CMD as RaTTuS said above. Please note that CPU and Nvidia mining is VERY SLOW, you are just wasting time and electricity
An ATI is much faster
An ATI is much faster
Yeah i know that, for that i want to change to GPU but i dont know how...
hmm.. i dont want to change the GPU. I will try to explane my situation^^
I have a Nvidia grafic card (GT 520 MX), I know that it's possible to mine with GPU with that card, but when i start guiminer and want to mine i only can select "GeForce G 520 MX" and i can select on how much of my 8 cores i want to mine, so the only way i can mine is with CPU. And my question here is how i can enable that i can mine with GPU with my grafic card.
hope this is intelligible
EDIT: i installed GPU Caps Viewer and under GPU it says "unknown", dont know why
Please note that CPU and Nvidia mining is VERY SLOW, you are just wasting time and electricity
An ATI is much faster
An ATI is much faster
Yeah i know that, for that i want to change to GPU but i dont know how...
Please note that CPU and Nvidia mining is VERY SLOW, you are just wasting time and electricity
An ATI is much faster
An ATI is much faster
Yeah i know that, for that i want to change to GPU but i dont know how...
Please note that CPU and Nvidia mining is VERY SLOW, you are just wasting time and electricity
An ATI is much faster
An ATI is much faster
Is this a laptop with switchable graphics?
yes it's a laptop but i dont know if the graphics are switchable
Is this a laptop with switchable graphics?
If I open poclbm.exe in the guiminer folder it closes itself immediatly after opening...
from the command line in guiminer type
poclbm.exe
and see what it says - you will probably need to point the device to the card
i.e.
-d1
poclbm.exe
and see what it says - you will probably need to point the device to the card
i.e.
-d1
Hey everyone out there (:
I have a question about "how can i enable GPU for my Nvidia card"
Graficcard: Nvidia GeForce GT 520 MX
Processor: Intel Core i7-2670QM
If i start guiminer make a new OpenCL miner i can only take "GeForce GT 520MX" and set the CPU affinity.
So now I'm mining with CPU 5 - 6 MHash/s
Is there any way I can enable GPU for my card and mine with GPU ( 5-6 MHash/s is really slow)
Would be nice if anyone could help
I have a question about "how can i enable GPU for my Nvidia card"
Graficcard: Nvidia GeForce GT 520 MX
Processor: Intel Core i7-2670QM
If i start guiminer make a new OpenCL miner i can only take "GeForce GT 520MX" and set the CPU affinity.
So now I'm mining with CPU 5 - 6 MHash/s
Is there any way I can enable GPU for my card and mine with GPU ( 5-6 MHash/s is really slow)
Would be nice if anyone could help
Jump to: