Topic: Gpu miner wont post after plugging in any riser (Read 694 times)
Try updating bios, on my gigabyte b250 i had issues with multiple cards on stock bios.
Specs:
ASRock Fatal1ty B250 GAMING K4
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151
EVGA Supernova G3 1000W
6x RX470 armor edition w/ PCIe VER 006 PCI-E 16x to 1x Powered Riser Adapter Card
120gb ssd
8gb ddr4 2133
I have tried every combination possible, it doesnt matter if the riser works or not it just will not post(give display) once any of them are connected.
Havent tried plugging hdmi into the card though. I can however connect through team viewer, so its actually booting but just not displaying anything once theyre plugged in.
Fans on the gpus spin up as well as the cpu just nothing goes to my display. I figured this mobo would work fine for gpu mining but as said it isnt posting.
I dont have an onboard speaker to diagnose via sounds but just seeing if anyone had any good ideas.
Windows is already installed on the machine and motherboard drivers are as well.
ASRock Fatal1ty B250 GAMING K4
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151
EVGA Supernova G3 1000W
6x RX470 armor edition w/ PCIe VER 006 PCI-E 16x to 1x Powered Riser Adapter Card
120gb ssd
8gb ddr4 2133
I have tried every combination possible, it doesnt matter if the riser works or not it just will not post(give display) once any of them are connected.
Havent tried plugging hdmi into the card though. I can however connect through team viewer, so its actually booting but just not displaying anything once theyre plugged in.
Fans on the gpus spin up as well as the cpu just nothing goes to my display. I figured this mobo would work fine for gpu mining but as said it isnt posting.
I dont have an onboard speaker to diagnose via sounds but just seeing if anyone had any good ideas.
Windows is already installed on the machine and motherboard drivers are as well.
Try 16.11 driver
Try 16.10 driver
Try 16.9 driver
Try with only 1 card
Tell me you flash or not flash the bios to the gpus
None are flashed, i am also connected via hdmi to the motherboard. Ive tried connecting directly to a gpu, w only 1 connected and it hasnt posted. However, I have installed 16.12.1 through teamviewer and i can use it to mine. Windows recognizes all cards but claymore only recognizes 3. So were onto a completely different issue now bc I honestly could care less if it shows on display as long as i can connect through TV and successfully use the 6gpus to mine. In my device manager the error on 3gpus is "This device cannot find enough free resources that it can use. (code 12) " If you want to use this device you will need to disable one of the other devices on this system."
Specs:
ASRock Fatal1ty B250 GAMING K4
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151
EVGA Supernova G3 1000W
6x RX470 armor edition w/ PCIe VER 006 PCI-E 16x to 1x Powered Riser Adapter Card
120gb ssd
8gb ddr4 2133
I have tried every combination possible, it doesnt matter if the riser works or not it just will not post(give display) once any of them are connected.
Havent tried plugging hdmi into the card though. I can however connect through team viewer, so its actually booting but just not displaying anything once theyre plugged in.
Fans on the gpus spin up as well as the cpu just nothing goes to my display. I figured this mobo would work fine for gpu mining but as said it isnt posting.
I dont have an onboard speaker to diagnose via sounds but just seeing if anyone had any good ideas.
Windows is already installed on the machine and motherboard drivers are as well.
ASRock Fatal1ty B250 GAMING K4
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151
EVGA Supernova G3 1000W
6x RX470 armor edition w/ PCIe VER 006 PCI-E 16x to 1x Powered Riser Adapter Card
120gb ssd
8gb ddr4 2133
I have tried every combination possible, it doesnt matter if the riser works or not it just will not post(give display) once any of them are connected.
Havent tried plugging hdmi into the card though. I can however connect through team viewer, so its actually booting but just not displaying anything once theyre plugged in.
Fans on the gpus spin up as well as the cpu just nothing goes to my display. I figured this mobo would work fine for gpu mining but as said it isnt posting.
I dont have an onboard speaker to diagnose via sounds but just seeing if anyone had any good ideas.
Windows is already installed on the machine and motherboard drivers are as well.
Try 16.11 driver
Try 16.10 driver
Try 16.9 driver
Try with only 1 card
Tell me you flash or not flash the bios to the gpus
Specs:
ASRock Fatal1ty B250 GAMING K4
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151
EVGA Supernova G3 1000W
6x RX470 armor edition w/ PCIe VER 006 PCI-E 16x to 1x Powered Riser Adapter Card
120gb ssd
8gb ddr4 2133
I have tried every combination possible, it doesnt matter if the riser works or not it just will not post(give display) once any of them are connected.
Havent tried plugging hdmi into the card though. I can however connect through team viewer, so its actually booting but just not displaying anything once theyre plugged in.
Fans on the gpus spin up as well as the cpu just nothing goes to my display. I figured this mobo would work fine for gpu mining but as said it isnt posting.
I dont have an onboard speaker to diagnose via sounds but just seeing if anyone had any good ideas.
Windows is already installed on the machine and motherboard drivers are as well.
ASRock Fatal1ty B250 GAMING K4
Intel G3930 Kaby Lake Dual-Core 2.9 GHz LGA 1151
EVGA Supernova G3 1000W
6x RX470 armor edition w/ PCIe VER 006 PCI-E 16x to 1x Powered Riser Adapter Card
120gb ssd
8gb ddr4 2133
I have tried every combination possible, it doesnt matter if the riser works or not it just will not post(give display) once any of them are connected.
Havent tried plugging hdmi into the card though. I can however connect through team viewer, so its actually booting but just not displaying anything once theyre plugged in.
Fans on the gpus spin up as well as the cpu just nothing goes to my display. I figured this mobo would work fine for gpu mining but as said it isnt posting.
I dont have an onboard speaker to diagnose via sounds but just seeing if anyone had any good ideas.
Windows is already installed on the machine and motherboard drivers are as well.
Jump to: