or D: i mean hah
Topic: Gpu usage jump from 64% to 100% (Read 2734 times)
Ill boot onto the other install and take a picture when i get home!
or D: i mean hah
or D: i mean hah
ok, good luck, if you still run into issues a simple screen shot of CGminer showing the settings of the GPU having the problem can help.
I have to installs of windows the second not doing the 64 to 100 jump. Ill look through settings there thanks!
can you post your GPU settings so we can see if there is something that seems to be off?
powertune 20%
Yep already doing thAt :/ thanks for the suggestion
powertune 20%
hmm interesting. the last motherboard i was using burnt out so i am now using a replacement of the same model. Booting off a different system however. Just running stock clocks which is strange
I once noticed that my GPU usage started to oscillate between 80 and 100 percent (like a sine wave).
Because of all the alt-coin frenzy I had 3 clients running in server mode (powercoin-qt, ... xyzcoin-qt).
I guess that was too much for my tiny AMD Athlon II X2 270 CPU
Once I stopped those clients GPU usage was stable at 100%.
Because of all the alt-coin frenzy I had 3 clients running in server mode (powercoin-qt, ... xyzcoin-qt).
I guess that was too much for my tiny AMD Athlon II X2 270 CPU
Once I stopped those clients GPU usage was stable at 100%.
are you using cg miner? drop into the GPU submenu and copy the GPU data there here so we can see it's settings?
i had the same problem with my 7870 xt's. i needed to fine tune my config to get them to be stable. You;'re probably overclocked too much, you might have you men set to low without using Afterburner configured properly or you'r heat is too high. I had a combination of all three of these until i got my cards running right. Now 100% gpu load all the time 
Hello all,
I fixed this problem at one point.... now having it again. The gpu usage when mining continually jumps from 64 to 100 suggestions?
I tried:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
I fixed this problem at one point.... now having it again. The gpu usage when mining continually jumps from 64 to 100 suggestions?
I tried:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
Jump to: