GPU's Number | Bitcointalksearch.org

bigjee

full member

Activity: 434

Merit: 107

Quote from: Southy on November 22, 2017, 02:51:34 PM

Hello i mine Zcash, i have to put in my GPU numbers in my miners, which is not a problem, i was just wondering how to link them back to the GPU's to see the performance, i believe that it does not go straight down 1 through 6 top to bottom, Im not sure if the line up is because i only got 4 of the 6 so far so i have the first 4 slots picked, but like GPU 1 on my miner, is not the first on my motherboard but im usuing 1070's with a Biostart TB85 I was wondering if theres a way to tell your GPU Number's when your entering entering in your 1-6 on the miner so you can see how the actual card is performing instead of guessing as im doing now, Thanks so much for your time.
Very sorry for the noob mining question really apprecaiate the help in advance. I have looked under devives and looked at the PCI its under and what its listed as but still seeing to have a problem/dont understand thanks alot guys.

Good question! I faced this challenge too when building and tweaking my rig.
Here are a few steps to make your life easier:

1) arrange cards physically and connect them how their risers are connected on the motherboard (the card on the most right will get the riser connection to the pci-e slot on the most right)
2) activate and connect each cards from right to left until all cards are connected (if using windows as you connect one card you will need to reboot each time).
3) once all are installed and recognised in device manager start tweaking with Afterburner.
4) Start with all cards on default setting and run your miner program.
5) overclock one card only and see which one sticks out (will give higher perfomance, temperature and hashrate).
6) label that card with a number
7) return that card to default repeat steps 4-7 for subsequent cards in your rig.

brownfly

full member

Activity: 308

Merit: 100

or if you have GPU with adjusted LED color, change it and see! ASUS STRIX for example.

ivakar

hero member

Activity: 756

Merit: 507

Quote from: Southy on November 22, 2017, 02:51:34 PM

Hello i mine Zcash, i have to put in my GPU numbers in my miners, which is not a problem, i was just wondering how to link them back to the GPU's to see the performance, i believe that it does not go straight down 1 through 6 top to bottom, Im not sure if the line up is because i only got 4 of the 6 so far so i have the first 4 slots picked, but like GPU 1 on my miner, is not the first on my motherboard but im usuing 1070's with a Biostart TB85 I was wondering if theres a way to tell your GPU Number's when your entering entering in your 1-6 on the miner so you can see how the actual card is performing instead of guessing as im doing now, Thanks so much for your time.
Very sorry for the noob mining question really apprecaiate the help in advance. I have looked under devives and looked at the PCI its under and what its listed as but still seeing to have a problem/dont understand thanks alot guys.

The first X16 slot - it is usually number 0
as for the rest -it is easy to check, shutdown all miners, by msi afterburner shut off all coolers, then one by one add 100% to the coolers of you gpu. That's how you will identify them, put a sticker to each card and you good to go

DevelopmentBank

full member

Activity: 406

Merit: 110

Quote from: fapar on November 22, 2017, 04:28:16 PM

Quote from: Southy on November 22, 2017, 02:51:34 PM

Hello i mine Zcash, i have to put in my GPU numbers in my miners, which is not a problem, i was just wondering how to link them back to the GPU's to see the performance, i believe that it does not go straight down 1 through 6 top to bottom, Im not sure if the line up is because i only got 4 of the 6 so far so i have the first 4 slots picked, but like GPU 1 on my miner, is not the first on my motherboard but im usuing 1070's with a Biostart TB85 I was wondering if theres a way to tell your GPU Number's when your entering entering in your 1-6 on the miner so you can see how the actual card is performing instead of guessing as im doing now, Thanks so much for your time.
Very sorry for the noob mining question really apprecaiate the help in advance. I have looked under devives and looked at the PCI its under and what its listed as but still seeing to have a problem/dont understand thanks alot guys.

Try it out by changing the revolutions of the cooler on graphics cards.
1. In MSI Afterburner;
2. In the miner writing in config -fanmin 20,70,70 and/or fanmax 20,70,70. hat is, the force forcing the cooler on one card to rotate slower than the other. And change these values alternately;
3. To stop the miner from one of the graphic card buttons 0-9 (depending on number of cards). The logic: card will cease production and to cool, and the cooler turns to fall.

Just a simpler version of what this guy said, all you have to do is download MSI afterburner (whatever the latest version is will do). Most miner's today (or at least claymore's) have GPU numbers that match afterburner's GPU order number. So once afterburner is installed, open afterburner, select a GPU, then simply increase the fan speed of that GPU. You should physically see what GPU speeds up and stick a number on it if you'd like.

[YAZ]

member

Activity: 208

Merit: 16

Quote from: Southy on November 22, 2017, 02:51:34 PM

Hello i mine Zcash, i have to put in my GPU numbers in my miners, which is not a problem, i was just wondering how to link them back to the GPU's to see the performance, i believe that it does not go straight down 1 through 6 top to bottom, Im not sure if the line up is because i only got 4 of the 6 so far so i have the first 4 slots picked, but like GPU 1 on my miner, is not the first on my motherboard but im usuing 1070's with a Biostart TB85 I was wondering if theres a way to tell your GPU Number's when your entering entering in your 1-6 on the miner so you can see how the actual card is performing instead of guessing as im doing now, Thanks so much for your time.
Very sorry for the noob mining question really apprecaiate the help in advance. I have looked under devives and looked at the PCI its under and what its listed as but still seeing to have a problem/dont understand thanks alot guys.

are you using afterburner?. Only 4 cards will be shown in card section, you need to scroll down. GPU 1 on AB is GPU 0 on miner console.

fapar

sr. member

Activity: 1414

Merit: 270

Undeads.com - P2E Runner Game

Quote from: Southy on November 22, 2017, 02:51:34 PM

Hello i mine Zcash, i have to put in my GPU numbers in my miners, which is not a problem, i was just wondering how to link them back to the GPU's to see the performance, i believe that it does not go straight down 1 through 6 top to bottom, Im not sure if the line up is because i only got 4 of the 6 so far so i have the first 4 slots picked, but like GPU 1 on my miner, is not the first on my motherboard but im usuing 1070's with a Biostart TB85 I was wondering if theres a way to tell your GPU Number's when your entering entering in your 1-6 on the miner so you can see how the actual card is performing instead of guessing as im doing now, Thanks so much for your time.
Very sorry for the noob mining question really apprecaiate the help in advance. I have looked under devives and looked at the PCI its under and what its listed as but still seeing to have a problem/dont understand thanks alot guys.

Try it out by changing the revolutions of the cooler on graphics cards.
1. In MSI Afterburner;
2. In the miner writing in config -fanmin 20,70,70 and/or fanmax 20,70,70. hat is, the force forcing the cooler on one card to rotate slower than the other. And change these values alternately;
3. To stop the miner from one of the graphic card buttons 0-9 (depending on number of cards). The logic: card will cease production and to cool, and the cooler turns to fall.

Ventureum

member

Activity: 61

Merit: 10

Quote from: brownfly on November 22, 2017, 02:55:42 PM

So what are trying to do? Identify a logic number of each connected GPU?

Usually you can find it in your mobo block diagram.

brownfly

full member

Activity: 308

Merit: 100

So what are trying to do? Identify a logic number of each connected GPU?

Southy

newbie

Activity: 23

Merit: 0

Hello i mine Zcash, i have to put in my GPU numbers in my miners, which is not a problem, i was just wondering how to link them back to the GPU's to see the performance, i believe that it does not go straight down 1 through 6 top to bottom, Im not sure if the line up is because i only got 4 of the 6 so far so i have the first 4 slots picked, but like GPU 1 on my miner, is not the first on my motherboard but im usuing 1070's with a Biostart TB85 I was wondering if theres a way to tell your GPU Number's when your entering entering in your 1-6 on the miner so you can see how the actual card is performing instead of guessing as im doing now, Thanks so much for your time.
Very sorry for the noob mining question really apprecaiate the help in advance. I have looked under devives and looked at the PCI its under and what its listed as but still seeing to have a problem/dont understand thanks alot guys.

Topic: GPU's Number (Read 304 times)