GRIDSEED for LTC dual lame with bfg miner 3.99

AramCoin

newbie

Activity: 14

Merit: 0

Quote from: d57heinz on November 16, 2017, 06:13:37 PM

What frequency are you running them at? If I recall correctly 800 MHz is default. Also have to keep it in powers of 2 on ~~diff~~ frequency. So maybe try 780 or less and see if it will stay alive. Also I you have a raspi burn an image of minera onto sdcard hook blades to the pi. Then you have full mining solution. I have found that my 24mhs gridtowers run best with cpuminer with scrypt support

Br

The setup was "gridseed:clock=850" , I will try 780 and check the difference.
I heard about raspi, so I just bought one and waiting for delivery.

Thank you @d57heinz ;-)

Quote from: sirslayer on November 16, 2017, 11:45:57 PM

or maybe its your software. i use cgminer 4.3.5-scrypt.2-gridseed

I will try with this version to compare.

Thanks for the advice @sirslayer.

LINK: https://github.com/dmaxl/cgminer/releases

sirslayer

hero member

Activity: 540

Merit: 501

chickens and cryptos

or maybe its your software. i use cgminer 4.3.5-scrypt.2-gridseed

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

What frequency are you running them at? If I recall correctly 800 MHz is default. Also have to keep it in powers of 2 on ~~diff~~ frequency. So maybe try 780 or less and see if it will stay alive. Also I you have a raspi burn an image of minera onto sdcard hook blades to the pi. Then you have full mining solution. I have found that my 24mhs gridtowers run best with cpuminer with scrypt support

Br

AramCoin

newbie

Activity: 14

Merit: 0

Dear Miners,

I have a dual Gridseed lame mining LTC with BFG Miner 3.99 on litecoinpool.org at around 6MH but after some time ( few hours) one the GDS is having very low hashrate, down to 2.5MH and even my hashrate come to 0 after sometime.

Does anyone find a solution to keep alive?

Thanks for your advices.

Topic: GRIDSEED for LTC dual lame with bfg miner 3.99 (Read 256 times)