Hello guys, found out the problem.
The power supplies was malfunctioning.
Thanks for all the messages.
Topic: Gridseed LTC mining (Read 198 times)
Man that photo of sgminer you included sure brings back memories. I remember my R9 280X hashed at like 750kh/s or so back in 2014. Those sure were fun times.
No idea if this is the issue, however considering that most Scrypt ASICs are almost in the GH/s right now, most likely you aren't getting any shares because the share difficulty is just way too high. The pool most likely assumes that nobody mines with GPUs anymore, which is more or less what your single gridseed is, and the min difficulty for a share is so high that it might takes hours or days to find.
Maybe try a different pool or some other scrypt coin with a lower difficulty.
No idea if this is the issue, however considering that most Scrypt ASICs are almost in the GH/s right now, most likely you aren't getting any shares because the share difficulty is just way too high. The pool most likely assumes that nobody mines with GPUs anymore, which is more or less what your single gridseed is, and the min difficulty for a share is so high that it might takes hours or days to find.
Maybe try a different pool or some other scrypt coin with a lower difficulty.
Maybe try current version 5.somethin somethin..
Looks like 5.5.0..but has support for gridseed.
Looks like 5.5.0..but has support for gridseed.
Great, I'll try it.
Maybe try current version 5.somethin somethin..
Looks like 5.5.0..but has support for gridseed.
Looks like 5.5.0..but has support for gridseed.
good point older software may be rejected by pools.
Maybe try current version 5.somethin somethin..
Looks like 5.5.0..but has support for gridseed.
Looks like 5.5.0..but has support for gridseed.
Changed for the info but I get this message:
Clock at 700
Code:
[2021-04-20 15:17:29] Pool 0 is sending mismatched block contents to us (0 is not 128-255)
Clock at 700
lower clock to 700 not 850
does anything show at the pool?
do you have any gear working on the pool?
If you have no working geaR AT the pool other than the grid seed it is harder to test.
you could point them to my account on viabtc.com
pool stratum+tcp://ltc.viabtc.com:3333
user philipma1957new.gridseed1
password x
if it connects and mines it is a pool issue
if it does not connect it is something else
just point 1 to my info above.
we can see if it works at viabtc
make sure to set clock to 700 not 850
does anything show at the pool?
do you have any gear working on the pool?
If you have no working geaR AT the pool other than the grid seed it is harder to test.
you could point them to my account on viabtc.com
pool stratum+tcp://ltc.viabtc.com:3333
user philipma1957new.gridseed1
password x
if it connects and mines it is a pool issue
if it does not connect it is something else
just point 1 to my info above.
we can see if it works at viabtc
make sure to set clock to 700 not 850
Hello there.
I found 2 Gridseed (5 chip) lost in my stuff and they seems to be working, but can't make them mine any LTC.
I'm using bfgminer 3.10.0 and Litecoinpool.org pool.
Here's my .bat file:
When I run the .bat file, I don't get any error message. Here's the .bat file running:
I've let it mining overnight one day but the Accepted Blocks was at 0.
Can anyone help me with that?
Thanks.
I found 2 Gridseed (5 chip) lost in my stuff and they seems to be working, but can't make them mine any LTC.
I'm using bfgminer 3.10.0 and Litecoinpool.org pool.
Here's my .bat file:
Code:
bfgminer -S gridseed:all -S opencl:noauto --set-device gridseed:clock=850 --scrypt -o stratum+tcp://us.litecoinpool.org:3333 -u [s]user[/s].[s]worker[/s] -p 1
When I run the .bat file, I don't get any error message. Here's the .bat file running:
I've let it mining overnight one day but the Accepted Blocks was at 0.
Can anyone help me with that?
Thanks.
Jump to: