My gear seems unsuitable, I will redirect to another crypto
Topic: GRIN mining problem under Hiveos (Read 98 times)
Thanks for answering
My gear seems unsuitable, I will redirect to another crypto
My gear seems unsuitable, I will redirect to another crypto
When I connect to the screen on the minor I have an error message (Unable to get device status for device ID: 3, error code: 3)
Some information can't be received from driver for 1050/1050ti because very long-long time ago Nvidia blocked it (current consumption) via drivers. If miner code try get from driver current consumption then driver respond N/A and you see such message in miner's log.
Welcome to hard world of mining )))
Both c29/c31 are designed for 8GB GPUs. There are miners that support c29 on 4gb cards, but this is a classic space/time trade off. Meaning, hashrate just doesn't make it worthwhile to begin with.
I suggest you do a little more research online and perhaps find an algo/coin better suited for your cards.
I suggest you do a little more research online and perhaps find an algo/coin better suited for your cards.
Hello everyone,
I problems with GRIN under Hiveos.
Minor used (Bminer).
I use 4 GeForce GTX 1050 Ti 4GB.
At the level of the algorithm when I use cuckaroo29 it does not work, apparently the algorithm is obsolete.
If I use cuckaroo31 the DAG is apparently doubled, so too big for my 4GB cards. It does not work ...
If I use the cuckaroo29d algorithm it works, under the interface Hiveos the cards turn. Only downside I have only 90% of the actions that are accepted (Hiveos interface).
When I connect to the screen on the minor I have an error message (Unable to get device status for device ID: 3, error code: 3)
After some research on the net, it would be a configuration error, the miner (Bminer) would not get the info on the GPU temperature and the speed of the fans.
third problem, I have no feedback on the pool.
I use Nanopool.
If you could guide me it will be nice
Thomas
I problems with GRIN under Hiveos.
Minor used (Bminer).
I use 4 GeForce GTX 1050 Ti 4GB.
At the level of the algorithm when I use cuckaroo29 it does not work, apparently the algorithm is obsolete.
If I use cuckaroo31 the DAG is apparently doubled, so too big for my 4GB cards. It does not work ...
If I use the cuckaroo29d algorithm it works, under the interface Hiveos the cards turn. Only downside I have only 90% of the actions that are accepted (Hiveos interface).
When I connect to the screen on the minor I have an error message (Unable to get device status for device ID: 3, error code: 3)
After some research on the net, it would be a configuration error, the miner (Bminer) would not get the info on the GPU temperature and the speed of the fans.
third problem, I have no feedback on the pool.
I use Nanopool.
If you could guide me it will be nice
Thomas
Jump to: