Topic: GTX 1080 ti ftw3 Overclocking help (Read 2922 times)
also, if noise isn't too much of an issue, i would just crank up that fan speed to 100%. Those things are meant to spin fast all the time, it's the process of changing speeds that degrades them over time.
1. Set the power limit to desired level
2. Increase core clock gradually until it's no longer stable then back it down a little bit
3. Increase memory clock gradually until it's no longer stable (or until your hashrate levels off) then back it down a little bit
BOOM done
You may have to do this for each algorithm
First of all thank you for your comment2. Increase core clock gradually until it's no longer stable then back it down a little bit
3. Increase memory clock gradually until it's no longer stable (or until your hashrate levels off) then back it down a little bit
BOOM done
You may have to do this for each algorithm
So that's it? i saw people go upside down like -20 on memory clock so they can get more hash power !!
I am using Nicehash which is mining on three different algorithms automatically "Equihash\Lbry\Lyra2REv2" what should i do in this case?
You can oc that card to +60/80 without really doing anything. You can't really damage it as you aren't playing with voltage. As long as your psu cables can handle the increase in power when you adjust the power limit to max (117%), the worst that will happen is a driver crash or your PC locks up.
1. Set the power limit to desired level
2. Increase core clock gradually until it's no longer stable then back it down a little bit
3. Increase memory clock gradually until it's no longer stable (or until your hashrate levels off) then back it down a little bit
BOOM done
You may have to do this for each algorithm
First of all thank you for your comment2. Increase core clock gradually until it's no longer stable then back it down a little bit
3. Increase memory clock gradually until it's no longer stable (or until your hashrate levels off) then back it down a little bit
BOOM done
You may have to do this for each algorithm
So that's it? i saw people go upside down like -20 on memory clock so they can get more hash power !!
I am using Nicehash which is mining on three different algorithms automatically "Equihash\Lbry\Lyra2REv2" what should i do in this case?
1. Set the power limit to desired level
2. Increase core clock gradually until it's no longer stable then back it down a little bit
3. Increase memory clock gradually until it's no longer stable (or until your hashrate levels off) then back it down a little bit
BOOM done
You may have to do this for each algorithm
2. Increase core clock gradually until it's no longer stable then back it down a little bit
3. Increase memory clock gradually until it's no longer stable (or until your hashrate levels off) then back it down a little bit
BOOM done
You may have to do this for each algorithm
Just had EVGA 1080TI SC editions - did not like them much, one out of 3 cards was acting up, were all new, no overclock... so got rid of them.
I see you overclocking it, but whats the stock clock?
p.s. in any overclocking, if temps are within a good limit (yours is) should not damage gpu, unless you will start with voltmod, IMO
As long as EVGA provide warranty for 3 years i don't mind the 5 months ROI, what stock settings ?I see you overclocking it, but whats the stock clock?
p.s. in any overclocking, if temps are within a good limit (yours is) should not damage gpu, unless you will start with voltmod, IMO
I am not touching the Volt overclocking, since electricity is super cheap here.
Just had EVGA 1080TI SC editions - did not like them much, one out of 3 cards was acting up, were all new, no overclock... so got rid of them.
I see you overclocking it, but whats the stock clock?
p.s. in any overclocking, if temps are within a good limit (yours is) should not damage gpu, unless you will start with voltmod, IMO
I see you overclocking it, but whats the stock clock?
p.s. in any overclocking, if temps are within a good limit (yours is) should not damage gpu, unless you will start with voltmod, IMO
Hello,
Recieved this card few days ago, mined Zcash 700 sol/s and decided to move to Lbry using Nicehash, i need help overclocking this card with MSI AB.
Here's a screenshot of the current OC and speed using Lbry only.
Electricity doesn't matter, as long as the OC settings doesn't hurt the GPU i am Ok.
Speed ~500 Lbry on Nicehash
Temp 63c~69c, is that Okay ?
Mining lbry on nicehash wise or i should mine alone on Pool ?
What should i adjust to lower fans and power ?
Thank you all
Recieved this card few days ago, mined Zcash 700 sol/s and decided to move to Lbry using Nicehash, i need help overclocking this card with MSI AB.
Here's a screenshot of the current OC and speed using Lbry only.
Electricity doesn't matter, as long as the OC settings doesn't hurt the GPU i am Ok.
Speed ~500 Lbry on Nicehash
Temp 63c~69c, is that Okay ?
Mining lbry on nicehash wise or i should mine alone on Pool ?
What should i adjust to lower fans and power ?
Thank you all
http://www.wikihow.com/Overclock-a-Graphics-Card
Hello,
Recieved this card few days ago, mined Zcash 700 sol/s and decided to move to Lbry using Nicehash, i need help overclocking this card with MSI AB.
Here's a screenshot of the current OC and speed using Lbry only.
Electricity doesn't matter, as long as the OC settings doesn't hurt the GPU i am Ok.
Speed ~500 Lbry on Nicehash
Temp 63c~69c, is that Okay ?
Mining lbry on nicehash wise or i should mine alone on Pool ?
What should i adjust to lower fans and power ?
Thank you all
Recieved this card few days ago, mined Zcash 700 sol/s and decided to move to Lbry using Nicehash, i need help overclocking this card with MSI AB.
Here's a screenshot of the current OC and speed using Lbry only.
Electricity doesn't matter, as long as the OC settings doesn't hurt the GPU i am Ok.
Speed ~500 Lbry on Nicehash
Temp 63c~69c, is that Okay ?
Mining lbry on nicehash wise or i should mine alone on Pool ?
What should i adjust to lower fans and power ?
Thank you all
http://www.wikihow.com/Overclock-a-Graphics-Card
Hello,
Recieved this card few days ago, mined Zcash 700 sol/s and decided to move to Lbry using Nicehash, i need help overclocking this card with MSI AB.
Here's a screenshot of the current OC and speed using Lbry only.
Electricity doesn't matter, as long as the OC settings doesn't hurt the GPU i am Ok.
Speed ~500 Lbry on Nicehash
Temp 63c~69c, is that Okay ?
Mining lbry on nicehash wise or i should mine alone on Pool ?
What should i adjust to lower fans and power ?
Thank you all
Recieved this card few days ago, mined Zcash 700 sol/s and decided to move to Lbry using Nicehash, i need help overclocking this card with MSI AB.
Here's a screenshot of the current OC and speed using Lbry only.
Electricity doesn't matter, as long as the OC settings doesn't hurt the GPU i am Ok.
Speed ~500 Lbry on Nicehash
Temp 63c~69c, is that Okay ?
Mining lbry on nicehash wise or i should mine alone on Pool ?
What should i adjust to lower fans and power ?
Thank you all
Jump to: