If you are not using it right now for mining, then you should just send it in for warranty.
Because you can try and fix it yourself, however keep in mind that you can damage while attempting to lubricate the bearing and if you damage the fan that way, then you will void warranty for sure.
Right now is not very profitable time to mine anyways so just RMA it.
Topic: GTX1070 dual the fan is not running properly? (Read 236 times)
I tried to remove the fan and disassembly and put some lubricant oil to the hole and assemble again the fan looks running fine now.
I couldn't find any silicon grease here in my place how about the other alternative I used lubricant oil from bike and it looks working fine now.
Anyway knows how to fix fan of gtx 1070 the fan looks spinning wiggle or shaking I have 1 GPU running with a higher temp because of this issue and even you set the Afterburner to low temp it still running at the higher temp.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
you need to lubricate the bearing with silicone grease and if the axis itself is loose, then you can no longer repair the new coolerI hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
I couldn't find any silicon grease here in my place how about the other alternative I used lubricant oil from bike and it looks working fine now.
I had the same problem with a Gtx 1050 ti card that had only a single fan from Gigabyte and it was low profille. I did my self the dismounting and thoroughly cleaning of the inside part of the card which makes the fan spin and it worked for about 4 months and started show problems again.
What you should do is to bring your card to a pc service repair shop and they will easily fix it for you for very little money, it is an easy fix.
What you should do is to bring your card to a pc service repair shop and they will easily fix it for you for very little money, it is an easy fix.
Anyway knows how to fix fan of gtx 1070 the fan looks spinning wiggle or shaking I have 1 GPU running with a higher temp because of this issue and even you set the Afterburner to low temp it still running at the higher temp.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
you need to lubricate the bearing with silicone grease and if the axis itself is loose, then you can no longer repair the new coolerI hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
Don't you think guys that the sticker is not a problem if I send them back for warranty?
Honestly, I don't have the plan to buy a new one I just want to use my warranty if still allow to send it back for warranty.
Why would you buy a gtx 1070 if schyas is available at a low price to get 1080
Honestly, I don't have the plan to buy a new one I just want to use my warranty if still allow to send it back for warranty.
legendary
Activity: 1848
Merit: 1165
My AR-15 ID's itself as a toaster. Want breakfast?
Anyway knows how to fix fan of gtx 1070 the fan looks spinning wiggle or shaking I have 1 GPU running with a higher temp because of this issue and even you set the Afterburner to low temp it still running at the higher temp.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
It would help if you could state exactly which brand of GPU you are using?
I am just going to assume you got the Gigabyte Windforce model which has very horrible fans.
If the fan is wiggling it means the bearing is out. You can either send it in for warranty, buy a replacement fan on eBay or just fix the bearing issue yourself.
If you want to fix it, you need to pull the fan blade and lubricate the bearings inside and you should be good for the next 6 months or so. Try not to damage the fan when doing this.
That's my plan to send it back because its still under warranty but the problem is the one fan doesn't have this
I couldn't find this sticker so I decided to find another way to fix the unstable fan spinning it sometimes slow and even I set the afterburner to high RPM the fan doesn't increase speed and the temp increases even I set it to limited temp.
If I replacing it with new fan from ebay the worst thing is that I'll pay double from customs to release the product.
How about repairing the fan?
if you can warranty it, i would warranty it.
if you want to replace the fan; you must disassemble so you can see the back side of the fan motor, and it will have a part number you can search for to get a replacement.
Anyway knows how to fix fan of gtx 1070 the fan looks spinning wiggle or shaking I have 1 GPU running with a higher temp because of this issue and even you set the Afterburner to low temp it still running at the higher temp.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
It would help if you could state exactly which brand of GPU you are using?
I am just going to assume you got the Gigabyte Windforce model which has very horrible fans.
If the fan is wiggling it means the bearing is out. You can either send it in for warranty, buy a replacement fan on eBay or just fix the bearing issue yourself.
If you want to fix it, you need to pull the fan blade and lubricate the bearings inside and you should be good for the next 6 months or so. Try not to damage the fan when doing this.
That's my plan to send it back because its still under warranty but the problem is the one fan doesn't have this
I couldn't find this sticker so I decided to find another way to fix the unstable fan spinning it sometimes slow and even I set the afterburner to high RPM the fan doesn't increase speed and the temp increases even I set it to limited temp.
If I replacing it with new fan from ebay the worst thing is that I'll pay double from customs to release the product.
How about repairing the fan?
Anyway knows how to fix fan of gtx 1070 the fan looks spinning wiggle or shaking I have 1 GPU running with a higher temp because of this issue and even you set the Afterburner to low temp it still running at the higher temp.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
It would help if you could state exactly which brand of GPU you are using?
I am just going to assume you got the Gigabyte Windforce model which has very horrible fans.
If the fan is wiggling it means the bearing is out. You can either send it in for warranty, buy a replacement fan on eBay or just fix the bearing issue yourself.
If you want to fix it, you need to pull the fan blade and lubricate the bearings inside and you should be good for the next 6 months or so. Try not to damage the fan when doing this.
Anyway knows how to fix fan of gtx 1070 the fan looks spinning wiggle or shaking I have 1 GPU running with a higher temp because of this issue and even you set the Afterburner to low temp it still running at the higher temp.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
I hope someone knows how to fix this the fan looks fine when I tried to spin it and I tried to reattach the fan still the same result.
Jump to: