Topic: H110 pro btc+ issues with zotac 1660 can not get past 4 cards! (Read 171 times)
Little update I got 9 running by disabling the intergrated graphics on board then putting each one in one by one. I also had to hard power down the psu each card and clear mem by holding down power buttons for a little while. Once I did that for each card they installed properly. I’m hoping somebody knows why the zotac 1660 does this. Very odd.
Yes I’ll give it a try. Just wierd how b250 works but without mining mode. Is there that option or one that’s labeled differently on the h110
Anybody get 8 zotac 1660 amps running on the h110+ boards? I have 4g on and this thing just restarts instantly when trying to load windows. I know one of my guys in discord had issues but had a b350. He got it running by turning off mining mode. Anybody have a solution for h110? I’m stumped lol
Have you connected the 4pin molex s to the motherboard ?
If not you could try and plug in atleast the 1st atop the pcie 1x slot and see if it works if not then can try plug in both , if it still wont boot then i would check for bad risers.
Also worth noting is the h110 is famous for having the slots to close to eachother so make sure the adapters dont touch eachother or just put some electrical tejp between them.
These options you can also play with :
BIOS Advanced Chipset Configuration IGPU Multi-Monitor Enabled
BIOS Advanced Chipset Configuration Primary Graphics Adapter Onboard (x16 slot)
Have you tried to install Windows 10 UEFI version? I heard somewhere that legacy mode doesn't support more than 4 VGAs. Please correct me if I am wrong about this.
Anybody get 8 zotac 1660 amps running on the h110+ boards? I have 4g on and this thing just restarts instantly when trying to load windows. I know one of my guys in discord had issues but had a b350. He got it running by turning off mining mode. Anybody have a solution for h110? I’m stumped lol
Jump to: