Hardware Version and BMminer Version in the Antminer System Overview are empty

fanatic26

hero member

Activity: 756

Merit: 560

Quote from: pyro926 on January 08, 2018, 10:07:59 PM

I have checked the log, but when the miner quits working, I can't access it to get the log to see WHY it quit working. The ip address for the miner just times out and I have manually reset the miner. I have tried several times to flash the new FW with no luck. Is this a common problem? How long does a typical flash take?

If your machine is fully shutting down there is some other problem. Most likely a PSU issue.

mirex

newbie

Activity: 8

Merit: 0

Quote from: Cemlik on January 07, 2018, 06:13:39 AM

Quote from: mirex on January 06, 2018, 09:00:41 AM

Hi fellow Bitcoin Miners,

I have a problem with my brand new Antminer S9. After properly connecting miner to PSU and ethernet, my miner is not working. The Hardware Version and BMminer Version in the Antminer System Overview are empty. I have a FW Fri Nov 17 17:57:49 CST 2017. I tried reinstall firmware from bitmain website, restarting, rebooting, reseting but nothing worked.

The red lights on boards are turning on and off. The green normal LED on front is on. I have your PSU AWS3++ in 230V socket.

And in kernel I found this: bmminer not found, restart bmminer ...

Please, what should I do?

Hi.
i have the same problem.did you solve the problem? How did you solve it?

Hi, my problem was solved by IP Reset. I did the reset and when it was done, it started. Problem disapeared, but then I needed to turn off the miner and the problem appeared again. So I didnt turn it on for a while and then started without the reset and it was working.
So try different reseting and turning off and on.

Quote from: HagssFIN on January 06, 2018, 09:23:37 AM

Quote from: mirex on January 06, 2018, 09:22:00 AM

Quote from: HagssFIN on January 06, 2018, 09:01:42 AM

Have you waited for long enough time?

The cold start process takes time with these new model S9's.

Whats the long enough time? I waited around 1 hour.

Well, I agree that should be long enough.

Maybe you could try this firmware fix and after that install the newest available firmware
Package to Fix Upgrade Failure
https://shop.bitmain.com/support.htm?pid=007201611260753443104jm60Q6L0639

Also please doublecheck that your pool settings are ok.

Also reset methods are available here if any of these would help out
https://enforum.bitmain.com/bbs/topics/3957

Thanks for your advice!

pyro926

newbie

Activity: 2

Merit: 0

I have checked the log, but when the miner quits working, I can't access it to get the log to see WHY it quit working. The ip address for the miner just times out and I have manually reset the miner. I have tried several times to flash the new FW with no luck. Is this a common problem? How long does a typical flash take?

fanatic26

hero member

Activity: 756

Merit: 560

If you have the Nov 2017 firmware I would recommend you try rolling back to an older version, not the latest. The November firmware has had a number of problems and I fix miners daily by rolling the firmware back.

Also you have not posted any kernel log details, which is the one place you should be looking to try and figure out why it is not mining.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Please contact Bitmain via a support ticket, if these tips are no use.

pyro926

newbie

Activity: 2

Merit: 0

I'm in the same boat. New S9, no hardware version, ect. I was able to get it to hash for a while, but then it would quit hashing and I couldn't log into it. I read that someone was able to run 2 of the 3 hash boards so I tried it and it seemed to work for a few hours, then it would quit hashing again. I reset it and finally it is working, but still only on 2 hash boards. I tried to upload new firmware and was unable to get any of them to work. I downloaded FW from bitmain, but it would just say: uploaded 0% until it timed out and then became unresponsive. I'd love to get this thing running the way it should.

Cemlik

member

Activity: 602

Merit: 32

Quote from: mirex on January 06, 2018, 09:00:41 AM

Hi fellow Bitcoin Miners,

I have a problem with my brand new Antminer S9. After properly connecting miner to PSU and ethernet, my miner is not working. The Hardware Version and BMminer Version in the Antminer System Overview are empty. I have a FW Fri Nov 17 17:57:49 CST 2017. I tried reinstall firmware from bitmain website, restarting, rebooting, reseting but nothing worked.

The red lights on boards are turning on and off. The green normal LED on front is on. I have your PSU AWS3++ in 230V socket.

And in kernel I found this: bmminer not found, restart bmminer ...

Please, what should I do?

Hi.
i have the same problem.did you solve the problem? How did you solve it?

mirex

newbie

Activity: 8

Merit: 0

Quote from: HagssFIN on January 06, 2018, 09:23:37 AM

Quote from: mirex on January 06, 2018, 09:22:00 AM

Quote from: HagssFIN on January 06, 2018, 09:01:42 AM

Have you waited for long enough time?

The cold start process takes time with these new model S9's.

Whats the long enough time? I waited around 1 hour.

Well, I agree that should be long enough.

Maybe you could try this firmware fix and after that install the newest available firmware
Package to Fix Upgrade Failure
https://shop.bitmain.com/support.htm?pid=007201611260753443104jm60Q6L0639

Also please doublecheck that your pool settings are ok.

Also reset methods are available here if any of these would help out
https://enforum.bitmain.com/bbs/topics/3957

Thanks, I will try that.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Quote from: mirex on January 06, 2018, 09:22:00 AM

Quote from: HagssFIN on January 06, 2018, 09:01:42 AM

Have you waited for long enough time?

The cold start process takes time with these new model S9's.

Whats the long enough time? I waited around 1 hour.

Well, I agree that should be long enough.

Maybe you could try this firmware fix and after that install the newest available firmware
Package to Fix Upgrade Failure
https://shop.bitmain.com/support.htm?pid=007201611260753443104jm60Q6L0639

Also please doublecheck that your pool settings are ok.

Also reset methods are available here if any of these would help out
https://enforum.bitmain.com/bbs/topics/3957

mirex

newbie

Activity: 8

Merit: 0

Quote from: HagssFIN on January 06, 2018, 09:01:42 AM

Have you waited for long enough time?

The cold start process takes time with these new model S9's.

Whats the long enough time? I waited around 1 hour.

HagssFIN

legendary

Activity: 2464

Merit: 1710

Electrical engineer. Mining since 2014.

Have you waited for long enough time?

The cold start process takes time with these new model S9's.

mirex

newbie

Activity: 8

Merit: 0

Hi fellow Bitcoin Miners,

I have a problem with my brand new Antminer S9. After properly connecting miner to PSU and ethernet, my miner is not working. The Hardware Version and BMminer Version in the Antminer System Overview are empty. I have a FW Fri Nov 17 17:57:49 CST 2017. I tried reinstall firmware from bitmain website, restarting, rebooting, reseting but nothing worked.

The red lights on boards are turning on and off. The green normal LED on front is on. I have your PSU AWS3++ in 230V socket.

And in kernel I found this: bmminer not found, restart bmminer ...

Please, what should I do?

Topic: Hardware Version and BMminer Version in the Antminer System Overview are empty (Read 342 times)