Maybe the psu wont deliver the power if all cards try to start simultan.
Topic: have problem with BAMT(4x5970),need help,2 BTC bounty (Read 2204 times)
I just tried 3 5970 and 1 5870,7gpus in total,
got another problem right now,
sometimes 5gpus working ,
sometimes 3 gpus working
sometimes 1 gpu working!
OMGGGGG!
got another problem right now,
sometimes 5gpus working ,
sometimes 3 gpus working
sometimes 1 gpu working!
OMGGGGG!
If I were you, I would--
1. Remove all gpus cards from the board
2. Plug-in one of them. If it works, remove it.
3. Repeat step 2 until you confirm that all cards working properly. Install the card to a different slot, so you can confirm that all slots working properly.
4. Try 2-cards and 3-cards setup, etc.
By the way, any clues from /var/log/bamt.log ? If you don't mind, please send it to me by pm or post it here
I just tried 3 5970 and 1 5870,7gpus in total,
got another problem right now,
sometimes 5gpus working ,
sometimes 3 gpus working
sometimes 1 gpu working!
OMGGGGG!
got another problem right now,
sometimes 5gpus working ,
sometimes 3 gpus working
sometimes 1 gpu working!
OMGGGGG!
I got it, plug in the Network Cable. 
I send you my Wallet addr. xD
I send you my Wallet addr. xD
I tried to run 3 cards ,got the same problem,
keep showing "starting mining processes" and suddenly exit again
keep showing "starting mining processes" and suddenly exit again
Why don't you try to install your GPU one by one? Also, /var/log/bamt.log may give you more information
Thank you for the generous offer but considering your rigs are not running correctly I do not really deserve it.
Maybe try windows if BAMT falls through?
Maybe try windows if BAMT falls through?
You really would be better served by posting in the BAMT thread. 
give me your wallet address, I would like to send you 1 btc since you help me a lot,
although I still can't get both 5x5870and 4x5970 work,
You really would be better served by posting in the BAMT thread.
I tried to run 3 cards ,got the same problem,
keep showing "starting mining processes" and suddenly exit again
keep showing "starting mining processes" and suddenly exit again
windoz7, cgminer should be able to do 4x5970. if you run at stock volts ( 800/300/1.05v) you will need a 1250 PSU or better.
what os should I use, any suggestions?
does windows7 64bit support 4 x5970??
does windows7 64bit support 4 x5970??
There was a test version floating around but it is completely unsupported now, so you either have to make 3x5970 rigs or use something other than BAMT.
so what version of BAMT should I use
none if you want 4x5970
so what version of BAMT should I use
x64 version of BAMT?
There isn't one, is there?
If you are running 8 GPUs are you using the x64 version of BAMT? Otherwise you will only see 7 GPUs. 0.5 BAMT is 32bit only.
I got problem when I runing 4 5970,
I have set the mining profile(bamt.conf and pools),and run all the fixer,restart mining sessions,it shows
"stoping mine processes:mine
starting mining processes:mine, starting mining processes:mine, starting mining processes:mine,
and suddenly exit
I tried to reinstall the os ,still got the same problem
mobo:890fx-gd70
latest BIOS version
2BTC bounty!!!!!!!
I have set the mining profile(bamt.conf and pools),and run all the fixer,restart mining sessions,it shows
"stoping mine processes:mine
starting mining processes:mine, starting mining processes:mine, starting mining processes:mine,
and suddenly exit
I tried to reinstall the os ,still got the same problem
mobo:890fx-gd70
latest BIOS version
2BTC bounty!!!!!!!
Jump to: