I was trying to do a classified ad on there but couldn't. So I listed it like a auction but with the prices in there. If that doesnt work after a few days Ill list them but I dont want to pay 10% fees on almost 3k worth of gear.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=121223269958 if you click my seller profile you will see the 2 broken blades listed outright.
Topic: Having a baby!!! Selling ASICminer block erupter blade and 1 2012 physical BTC. (Read 1227 times)
November 26, 2013, 01:42:08 AM
November 25, 2013, 11:42:08 PM
Not to be a downer but those blade prices are still pretty high, especially for the broken ones. I paid about 60% of that for new working blades. Else I was going to consider the defectives.
Can you please link to the ebay auctions here or send a PM?
Can you please link to the ebay auctions here or send a PM?
November 25, 2013, 10:53:36 PM
Hi there I am also posting this on eBay, craigslist and a few other smaller places. I will take either paypal (verified only) or bitcoin obviously.
You can PM offers or post here, found out I am having baby number 2 and selling this stuff should pay for just about everything we need for the little one.
I am selling 1 2012 bitcoin in a coin case, seal intact. http://casascius.uberbills.com/ and the coin is 1Cs9oNrR
I spent hours trying to get everything to work, and I couldn't. So my loss your gain. I understand prices may seem high at the moment but on ebay they are going for 10%+ what I am asking here.
Below is the exact ad I am placing elsewhere
Feel free to ask any questions and submit your offers to me
I am selling all my mining equipment
8-Working Blades 10.7 gh/s
2-Non working Blades (Currently on eBay auction)
1-Back-plane for the blades
I also have 2 psu's, 1000W, for the back-plane
Please note 7 blades function at 100% with no problems
I have marked each blade with a number that let me know where to put it in the backplane
Numbers 3,4,5,6,7,9,10 all work at 100% no problems all at 10.7 GH/s no problem
Number 1 has two chips that are not working and it runs around 9.4 GH/s average
Number 2 has its Ethernet port broken off, it came this way I have never been able to access the configuration page nor do I know how to fix it, if you know how to solder well there you go!
Number 8 would never activate, it heats up when plugged into the backplane but does not connect to the configuration page.
2 PSU's work great but I have only one cord, first purchase gets it.
Backplane- All slots work fine no damage runs clean.
I accept paypal or bitcoin only, if paypal I only accept verified accounts in the USA.
Pricing
Units-3,4,5,6,7,9,10-$360+12.95 shipping each
Unit 1 $345 +12.95
Unit 2 and 8 $310 +12.95 each
PSU-$40 each + 6.95 I only have 1 cord
Backplane-$220 +10.95 shipping
Why am I selling?
I purchased this mining set here on eBay. When it arrived I was promised setup help, that I didn't get, With the help of some really nice people on bitcointalk.org I was able to get my system running. However, instead of 10 working blades I had only received 8 and they wont all run at the same time for me. I can run 4 blades at a time (any configuration of blades) and they hash at a little over 41 GH/S average. However if I connect a 5th blade it will work for a few seconds and then kill itself and 2 other blades.
I have had 2 people try and help me with this and it wont work for me. I have spent too many hours and am cutting my loses, everything appears to work. I have two PSU because I bought a second one hoping it was the issue and it wasn't. It could be the backplane but all the slots on the backplane work fine so that also doesn't really make sense. Anyway, I believe in honestly and being open so there it is.
Disclaimer
I will provide you pictures with your specific purchases working. Since these are electronics that will be mailed I cannot guarantee anything once they leave my home. I will wrap them in bubble wrap. Place them in a box and then place that inside the mailing package. If you would like these insured to prevent issues with damaged goods please let me know and I will add it to the invoice. I describe everything as clear as I can so there is no confusion. If you have questions just ask I will answer honestly and openly. All parts are sold as is, I cannot offer you a refund but will give support and direct you to those smarter than me that helped me. They are actually quite easy to set up once you've been walked through the process but for whatever reason only 4 worked at one time.
Lastly
If you want to buy the whole set as is obviously I can offer you a discount. But please understand the issues I have had above. Each piece by itself works but when I connect all my pieces they don't work together. However if you just need a new blade or new psu I am your guy!
Again, don't hesitate to contact me with questions or offers.
You can PM offers or post here, found out I am having baby number 2 and selling this stuff should pay for just about everything we need for the little one.
I am selling 1 2012 bitcoin in a coin case, seal intact. http://casascius.uberbills.com/ and the coin is 1Cs9oNrR
I spent hours trying to get everything to work, and I couldn't. So my loss your gain. I understand prices may seem high at the moment but on ebay they are going for 10%+ what I am asking here.
Below is the exact ad I am placing elsewhere
Feel free to ask any questions and submit your offers to me
I am selling all my mining equipment
8-Working Blades 10.7 gh/s
2-Non working Blades (Currently on eBay auction)
1-Back-plane for the blades
I also have 2 psu's, 1000W, for the back-plane
Please note 7 blades function at 100% with no problems
I have marked each blade with a number that let me know where to put it in the backplane
Numbers 3,4,5,6,7,9,10 all work at 100% no problems all at 10.7 GH/s no problem
Number 1 has two chips that are not working and it runs around 9.4 GH/s average
Number 2 has its Ethernet port broken off, it came this way I have never been able to access the configuration page nor do I know how to fix it, if you know how to solder well there you go!
Number 8 would never activate, it heats up when plugged into the backplane but does not connect to the configuration page.
2 PSU's work great but I have only one cord, first purchase gets it.
Backplane- All slots work fine no damage runs clean.
I accept paypal or bitcoin only, if paypal I only accept verified accounts in the USA.
Pricing
Units-3,4,5,6,7,9,10-$360+12.95 shipping each
Unit 1 $345 +12.95
Unit 2 and 8 $310 +12.95 each
PSU-$40 each + 6.95 I only have 1 cord
Backplane-$220 +10.95 shipping
Why am I selling?
I purchased this mining set here on eBay. When it arrived I was promised setup help, that I didn't get, With the help of some really nice people on bitcointalk.org I was able to get my system running. However, instead of 10 working blades I had only received 8 and they wont all run at the same time for me. I can run 4 blades at a time (any configuration of blades) and they hash at a little over 41 GH/S average. However if I connect a 5th blade it will work for a few seconds and then kill itself and 2 other blades.
I have had 2 people try and help me with this and it wont work for me. I have spent too many hours and am cutting my loses, everything appears to work. I have two PSU because I bought a second one hoping it was the issue and it wasn't. It could be the backplane but all the slots on the backplane work fine so that also doesn't really make sense. Anyway, I believe in honestly and being open so there it is.
Disclaimer
I will provide you pictures with your specific purchases working. Since these are electronics that will be mailed I cannot guarantee anything once they leave my home. I will wrap them in bubble wrap. Place them in a box and then place that inside the mailing package. If you would like these insured to prevent issues with damaged goods please let me know and I will add it to the invoice. I describe everything as clear as I can so there is no confusion. If you have questions just ask I will answer honestly and openly. All parts are sold as is, I cannot offer you a refund but will give support and direct you to those smarter than me that helped me. They are actually quite easy to set up once you've been walked through the process but for whatever reason only 4 worked at one time.
Lastly
If you want to buy the whole set as is obviously I can offer you a discount. But please understand the issues I have had above. Each piece by itself works but when I connect all my pieces they don't work together. However if you just need a new blade or new psu I am your guy!
Again, don't hesitate to contact me with questions or offers.
Jump to: