Topic: having issue with changing whatsminer m3 firmware using sd card (Read 454 times)
Did you ever get a solution? Ive got six of them that someone has upgraded the firmware on and now they're useless lol
note there are h3 and h6 controllers
look to see if you have an h3 or h6.
look to see if you have an h3 or h6.
Check the latest firmware from Whatsminer from here https://drive.google.com/drive/folders/1QbjEPiIByWZLXIMovOMqeABDpYJDf77S
Make sure to check the control board model before you use the SD card image to flash it to your miner.
Make sure to check the control board model before you use the SD card image to flash it to your miner.
Did you ever get this sorted? I'm having the same issues.
February 13, 2019, 02:02:12 PM
I don't think they support downgrades. Why do you want to downgrade?, is there a problem with the current firmware version?
yes they are on 8 Th/s(low power mode) and when i choose a firmware in whatsminer tool for upgrade the miner it showing failed error and the device not get upgraded.
February 08, 2019, 05:06:30 PM
I don't think they support downgrades. Why do you want to downgrade?, is there a problem with the current firmware version?
February 07, 2019, 10:25:06 AM
Did you buy it from pangolinminer? Ask their help, they should be able to give you proper instructions
actually i bought them from reseller and they don't give me a useful solution. i don't know where they bought their devices.
February 07, 2019, 02:38:16 AM
Did you buy it from pangolinminer? Ask their help, they should be able to give you proper instructions
February 07, 2019, 12:20:22 AM
I don't have much experience with whatsminer m3 but I found some useful troubleshooting guide which I think will help to solve this issue.
Take a look at this troubleshooting guide from here https://drive.google.com/file/d/1EzaTC7wIgcw2ardcMYXznyzMuWniNxsG/view
Take a look at this troubleshooting guide from here https://drive.google.com/file/d/1EzaTC7wIgcw2ardcMYXznyzMuWniNxsG/view
thanks sir,
not helping
i think i need sd card firmware version.
February 06, 2019, 10:57:52 AM
I don't have much experience with whatsminer m3 but I found some useful troubleshooting guide which I think will help to solve this issue.
Take a look at this troubleshooting guide from here https://drive.google.com/file/d/1EzaTC7wIgcw2ardcMYXznyzMuWniNxsG/view
Take a look at this troubleshooting guide from here https://drive.google.com/file/d/1EzaTC7wIgcw2ardcMYXznyzMuWniNxsG/view
February 05, 2019, 05:22:22 AM
hi! I have bought some m3 machines, i want to downgrade the firmware with sd card, most of them works fine after changing the firmware, but some of them which has e big black Heath Sink on their control board doesn't work after machine resets.
and now whenever i plug machine in to power all lights(network port, Alarm and Active lights) keeps on and not getting off or flicking.
i have tried both Zynq and H3 image but it still not working.
before changing the firmware they works fine.
any idea?
is there any other image file other than zyng or h3?
thanks guy <3
and now whenever i plug machine in to power all lights(network port, Alarm and Active lights) keeps on and not getting off or flicking.
i have tried both Zynq and H3 image but it still not working.
before changing the firmware they works fine.
any idea?
is there any other image file other than zyng or h3?
thanks guy <3
Jump to: