Author

Topic: HD7970 on pci-e 1x (Read 3511 times)

KS
sr. member
Activity: 448
Merit: 250
May 08, 2013, 06:29:48 AM
#8
About 250 - 275 Watts, depending on your overclocking is probably a good range for estimates.

I know you can use a 1x-to-16x riser (I am using several), but I don't think 1x riser will work.

250W stock, up to ≃315W with OC.
hero member
Activity: 575
Merit: 500
May 03, 2013, 12:06:34 PM
#6
You can use the 1x connectors as long as you cut off the back end of the connector, it's just plastic anyway.

You could technically saw off the back end of the connector on the card itself as well but lets not do that shall we! I actually saw a guide once of someone who turned his 8800GT into a PCIe 1x card that way with a dremel to use in a itx motherboard that lacked a 16x slot.
sr. member
Activity: 389
Merit: 250
May 02, 2013, 05:38:59 PM
#5
but in this picture i can see that some cards connected to pci-e 1x. im right ?
https://i.imgur.com/2feHArI.jpg

Unfortunately, I don't think so.  If you look at this example 1x to 1x connector:



the connector that goes into the motherboard slot will be fine, but on the card side it's not going to fit.  There is one break/space in the pins (for lack of a better word) on the card, but that connector would need that space and then an additional space where the connector ends

One this 2nd pic, on the connector that goes on the card, you can see one break in the pins, but not a 2nd.  Hopefully this makes sense.



legendary
Activity: 1344
Merit: 1004
May 02, 2013, 04:37:58 PM
#4
but in this picture i can see that some cards connected to pci-e 1x. im right ?
https://i.imgur.com/2feHArI.jpg

whos picture is that? I want to run 6 7970/7950 in one computer, but I get driver problems. 1 BTC bounty if you can fix my problem. https://bitcointalksearch.org/topic/1-btc-bounty-claimed-get-6-radeon-7970-installing-and-mining-in-windows-193695
full member
Activity: 194
Merit: 100
May 02, 2013, 01:19:35 AM
#3
but in this picture i can see that some cards connected to pci-e 1x. im right ?
https://i.imgur.com/2feHArI.jpg
sr. member
Activity: 389
Merit: 250
May 01, 2013, 05:55:50 PM
#2
About 250 - 275 Watts, depending on your overclocking is probably a good range for estimates.

I know you can use a 1x-to-16x riser (I am using several), but I don't think 1x riser will work.
full member
Activity: 194
Merit: 100
May 01, 2013, 04:36:01 PM
#1
Hello, how much watts eat 7970 in ,mining mode ? and can that card work with pci-e 1x (raiser) ?
Jump to: