Author

Topic: hello i have s9 hashboard no hashing (Read 121 times)

legendary
Activity: 2436
Merit: 6643
be constructive or S.T.F.U
November 15, 2021, 03:51:17 PM
#7
that is all the karnel log stop line 1 fan ok

no fan 2 just one

If the kernel log stops at fan 1 check then there is something wrong with the firmware, or the control board is dead, try to flash the stock firmware to confirm where the issue might be and then you can revert back to the custom firmware you are using.
newbie
Activity: 3
Merit: 0
November 15, 2021, 12:59:44 PM
#6
that is all the karnel log stop line 1 fan ok

no fan 2 just one

I'm not so familiar with vnish firmware so if you want our help. I suggest you switch to stock firmware or original firmware from Bitmain.
So that we can analyze the kernel logs of your miner.

To put it back to original firmware follow this guide S9 control board program recovery

And then try to test it again if it will hash or not. If not then post the whole kernel logs here. Don't forget to use the insert code tag you can find it when editing a post with # icon it will help make your thread clean.


look
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
November 15, 2021, 11:39:30 AM
#5
that is all the karnel log stop line 1 fan ok

no fan 2 just one

I'm not so familiar with vnish firmware so if you want our help. I suggest you switch to stock firmware or original firmware from Bitmain.
So that we can analyze the kernel logs of your miner.

To put it back to original firmware follow this guide S9 control board program recovery

And then try to test it again if it will hash or not. If not then post the whole kernel logs here. Don't forget to use the insert code tag you can find it when editing a post with # icon it will help make your thread clean.
newbie
Activity: 3
Merit: 0
November 15, 2021, 04:58:04 AM
#4
Does the kernel logs seem not completed and the last part shows vnish so I guess this is a customed firmware?

It is indeed vnish and the kernel log is (without a shadow of doubt) incomplete.

Code:
Checking fans!
1 fan ok

The next line show show

Code:
2 fan ok

or shows any fan-related errors, op you need to post the complete kernel log if you want answers, otherwise, you can only expect people guessing your problem which usually doesn't solve anything.



that is all the karnel log stop line 1 fan ok

no fan 2 just one
legendary
Activity: 2436
Merit: 6643
be constructive or S.T.F.U
November 08, 2021, 07:27:43 PM
#3
Does the kernel logs seem not completed and the last part shows vnish so I guess this is a customed firmware?

It is indeed vnish and the kernel log is (without a shadow of doubt) incomplete.

Code:
Checking fans!
1 fan ok

The next line show show

Code:
2 fan ok

or shows any fan-related errors, op you need to post the complete kernel log if you want answers, otherwise, you can only expect people guessing your problem which usually doesn't solve anything.
legendary
Activity: 3472
Merit: 3217
Playbet.io - Crypto Casino and Sportsbook
November 08, 2021, 05:43:58 PM
#2
Does the kernel logs seem not completed and the last part shows vnish so I guess this is a customed firmware?

I suggest you edit your thread, look for an insert code tag with icon #, and insert all kernel logs. If you can't still post the whole kernel logs due to your post limit I suggest you paste the kernel logs on pastebin.com

And actually, most of the solutions and guides are already posted under this section as a sticky thread so try some solutions from this thread below.
- https://bitcointalksearch.org/topic/most-common-mining-issues-read-before-making-a-new-post-5103892
newbie
Activity: 3
Merit: 0
November 08, 2021, 02:34:07 PM
#1
pleas help me
this is my karnal log




Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000292] ps7-ttc #0 at df804000, irq=43
[    0.000594] Console: colour dummy device 80x30
[    0.000623] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090240] pid_max: default: 32768 minimum: 301
[    0.090452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090470] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092620] CPU: Testing write buffer coherency: ok
[    0.092930] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092987] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.093204] L310 cache controller enabled
[    0.093223] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170989] CPU1: Booted secondary processor
[    0.260219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260347] Brought up 2 CPUs
[    0.260366] SMP: Total of 2 processors activated.
[    0.260374] CPU: All CPU(s) started in SVC mode.
[    0.261034] devtmpfs: initialized
[    0.263426] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264597] regulator-dummy: no parameters
[    0.271959] NET: Registered protocol family 16
[    0.274186] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276443] cpuidle: using governor ladder
[    0.276455] cpuidle: using governor menu
[    0.283753] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285247] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285261] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285371] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.306981] bio: create slab at 0
[    0.308364] vgaarb: loaded
[    0.309065] SCSI subsystem initialized
[    0.309931] usbcore: registered new interface driver usbfs
[    0.310117] usbcore: registered new interface driver hub
[    0.310358] usbcore: registered new device driver usb
[    0.310886] media: Linux media interface: v0.10
[    0.311067] Linux video capture interface: v2.00
[    0.311307] pps_core: LinuxPPS API ver. 1 registered
[    0.311318] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.311440] PTP clock support registered
[    0.311795] EDAC MC: Ver: 3.0.0
[    0.312837] Advanced Linux Sound Architecture Driver Initialized.
[    0.315567] DMA-API: preallocated 4096 debug entries
[    0.315581] DMA-API: debugging enabled by kernel config
[    0.315648] Switched to clocksource arm_global_timer
[    0.335862] NET: Registered protocol family 2
[    0.336717] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.336774] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.336859] TCP: Hash tables configured (established 4096 bind 4096)
[    0.336909] TCP: reno registered
[    0.336927] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.336957] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337185] NET: Registered protocol family 1
[    0.337524] RPC: Registered named UNIX socket transport module.
[    0.337536] RPC: Registered udp transport module.
[    0.337545] RPC: Registered tcp transport module.
[    0.337553] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.337566] PCI: CLS 0 bytes, default 64
[    0.337990] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.339972] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.341989] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.342187] msgmni has been set to 967
[    0.342952] io scheduler noop registered
[    0.342965] io scheduler deadline registered
[    0.343005] io scheduler cfq registered (default)
[    0.354900] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.354919] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.477096] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.044757] console [ttyPS0] enabled
[    1.049027] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.056658] [drm] Initialized drm 1.1.0 20060810
[    1.073478] brd: module loaded
[    1.082780] loop: module loaded
[    1.092117] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.097902] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.105833] libphy: XEMACPS mii bus: probed
[    1.110207] ------------- phy_id = 0x3625e62
[    1.114930] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.123747] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.130390] ehci-pci: EHCI PCI platform driver
[    1.137649] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.144450] usbcore: registered new interface driver usb-storage
[    1.151340] mousedev: PS/2 mouse device common for all mice
[    1.157451] i2c /dev entries driver
[    1.164301] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.169838] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.175724] Xilinx Zynq CpuIdle Driver started
[    1.180561] sdhci: Secure Digital Host Controller Interface driver
[    1.186696] sdhci: Copyright(c) Pierre Ossman
[    1.190999] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.197814] mmc0: no vqmmc regulator found
[    1.201826] mmc0: no vmmc regulator found
[    1.245673] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254340] usbcore: registered new interface driver usbhid
[    1.259850] usbhid: USB HID core driver
[    1.264557] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.270850] nand: Micron MT29F2G08ABAEAWP
[    1.274816] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.280757] Bad block table found at page 131008, version 0x01
[    1.286986] Bad block table found at page 130944, version 0x01
[    1.293038] 3 ofpart partitions found on MTD device pl353-nand
[    1.298825] Creating 3 MTD partitions on "pl353-nand":
[    1.303915] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.311938] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319228] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.328140] TCP: cubic registered
[    1.331376] NET: Registered protocol family 17
[    1.336077] Registering SWP/SWPB emulation handler
[    1.341939] regulator-dummy: disabling
[    1.346225] UBI: attaching mtd1 to ubi0
[    1.874238] UBI: scanning is finished
[    1.885884] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.892936] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.899723] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.906408] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.913246] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.919257] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.926367] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 140302258
[    1.935294] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.944525] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.944531] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.948415] ALSA device list:
[    1.948418]   No soundcards found.
[    1.964792] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    2.030854] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.036806] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.045909] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.055798] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.060826] UBIFS: media format: w4/r0 (latest is w4/r0), UUID CC8094B9-A5B3-4EBF-B337-15554B517750, small LPT model
[    2.072122] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.078845] devtmpfs: mounted
[    2.081951] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.919869] random: dd urandom read with 0 bits of entropy available
[    3.285697]
[    3.285697] bcm54xx_config_init
[    3.895696]
[    3.895696] bcm54xx_config_init
[    7.896529] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.902619] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.134531] In axi fpga driver!
[   23.137633] request_mem_region OK!
[   23.140992] AXI fpga dev virtual address is 0xdf9fc000
[   23.146128] *base_vir_addr = 0xc51a
[   23.160858] In fpga mem driver!
[   23.164004] request_mem_region OK!
[   23.167607] fpga mem virtual address is 0xe2000000
[   23.895691]
[   23.895691] bcm54xx_config_init
[   24.525699]
[   24.525699] bcm54xx_config_init
[   28.526540] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   28.532554] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  173.332743] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Jul 26 15:52:12 CST 2019 type: Antminer S9 (vnish for AWESOME 3.8.6)
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Checking fans!
1 fan ok




Jump to: