Author

Topic: help antminer s9 please (Read 93 times)

mikeywith

legendary

Activity: 2170

Merit: 6279

be constructive or S.T.F.U

Quote from: sladejr on November 01, 2021, 10:35:00 PM

follow the photo of how it is

It doesn't change anything, I could see what is in the photo from the kernel log in your first post, as I said chances are you have two dead hash boards and only one working fine, the probability of this being the case is 90%, the other 10% would be firmware/PSU, i explained to you how to troubleshoot those in the previous post as well.

On a side note, what kind of firmware are you using? this doesn't look anything like the stock firmware.

sladejr

newbie

Activity: 7

Merit: 0

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ga36f3af-dirty (lzq@ubuntu) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #90 SMP PREEMPT Thu Jun 20 15:01:47 CST 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c075a640, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9344 r8192 d15232 u32768
[    0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364252K/507904K available (5094K kernel code, 292K rwdata, 1948K rodata, 209K init, 259K bss, 143652K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06e8cf4   (7044 kB)
[    0.000000]       .init : 0xc06e9000 - 0xc071d480   ( 210 kB)
[    0.000000]       .data : 0xc071e000 - 0xc0767058   ( 293 kB)
[    0.000000]        .bss : 0xc0767064 - 0xc07a7d64   ( 260 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000013] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000294] ps7-ttc #0 at df804000, irq=43
[    0.000594] Console: colour dummy device 80x30
[    0.000623] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.100242] pid_max: default: 32768 minimum: 301
[    0.100452] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.102658] CPU: Testing write buffer coherency: ok
[    0.102969] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.103025] Setting up static identity map for 0x4d3ec0 - 0x4d3f18
[    0.103243] L310 cache controller enabled
[    0.103262] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.180987] CPU1: Booted secondary processor
[    0.270219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.270349] Brought up 2 CPUs
[    0.270368] SMP: Total of 2 processors activated.
[    0.270376] CPU: All CPU(s) started in SVC mode.
[    0.271037] devtmpfs: initialized
[    0.273487] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.274682] regulator-dummy: no parameters
[    0.281585] NET: Registered protocol family 16
[    0.283850] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.286120] cpuidle: using governor ladder
[    0.286133] cpuidle: using governor menu
[    0.293513] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.295036] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.295048] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.295157] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.317564] bio: create slab  at 0
[    0.318949] vgaarb: loaded
[    0.319644] SCSI subsystem initialized
[    0.320818] usbcore: registered new interface driver usbfs
[    0.320999] usbcore: registered new interface driver hub
[    0.322004] usbcore: registered new device driver usb
[    0.322540] media: Linux media interface: v0.10
[    0.322698] Linux video capture interface: v2.00
[    0.322942] pps_core: LinuxPPS API ver. 1 registered
[    0.322953] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.323075] PTP clock support registered
[    0.323427] EDAC MC: Ver: 3.0.0
[    0.324466] Advanced Linux Sound Architecture Driver Initialized.
[    0.327188] DMA-API: preallocated 4096 debug entries
[    0.327201] DMA-API: debugging enabled by kernel config
[    0.327269] Switched to clocksource arm_global_timer
[    0.346859] NET: Registered protocol family 2
[    0.347579] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.347637] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.347722] TCP: Hash tables configured (established 4096 bind 4096)
[    0.347767] TCP: reno registered
[    0.347785] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.347815] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.348050] NET: Registered protocol family 1
[    0.348384] RPC: Registered named UNIX socket transport module.
[    0.348396] RPC: Registered udp transport module.
[    0.348404] RPC: Registered tcp transport module.
[    0.348412] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.348424] PCI: CLS 0 bytes, default 64
[    0.348852] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.350847] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.352878] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.353061] msgmni has been set to 967
[    0.353821] io scheduler noop registered
[    0.353833] io scheduler deadline registered
[    0.353874] io scheduler cfq registered (default)
[    0.365949] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.365969] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.491999] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.060313] console [ttyPS0] enabled
[    1.064573] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.072201] [drm] Initialized drm 1.1.0 20060810
[    1.089198] brd: module loaded
[    1.098588] loop: module loaded
[    1.108013] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.113765] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.121580] libphy: XEMACPS mii bus: probed
[    1.125952] ------------- phy_id = 0x3625e62
[    1.130860] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.139633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.146246] ehci-pci: EHCI PCI platform driver
[    1.153512] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.160354] usbcore: registered new interface driver usb-storage
[    1.167197] mousedev: PS/2 mouse device common for all mice
[    1.173326] i2c /dev entries driver
[    1.180216] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.185692] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.191608] Xilinx Zynq CpuIdle Driver started
[    1.196442] sdhci: Secure Digital Host Controller Interface driver
[    1.202686] sdhci: Copyright(c) Pierre Ossman
[    1.206954] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.213784] mmc0: no vqmmc regulator found
[    1.217827] mmc0: no vmmc regulator found
[    1.257313] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.265995] usbcore: registered new interface driver usbhid
[    1.271507] usbhid: USB HID core driver
[    1.276204] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.282500] nand: Micron MT29F2G08ABAEAWP
[    1.286465] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.292401] Bad block table found at page 131008, version 0x01
[    1.298626] Bad block table found at page 130944, version 0x01
[    1.304674] 3 ofpart partitions found on MTD device pl353-nand
[    1.310457] Creating 3 MTD partitions on "pl353-nand":
[    1.315547] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.323593] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.330926] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.339640] nf_conntrack version 0.5.0 (7739 buckets, 30956 max)
[    1.346161] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.351481] TCP: cubic registered
[    1.354716] NET: Registered protocol family 17
[    1.359449] Registering SWP/SWPB emulation handler
[    1.365327] regulator-dummy: disabling
[    1.369701] UBI: attaching mtd1 to ubi0
[    1.898056] UBI: scanning is finished
[    1.909680] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.916728] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.923524] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.930200] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.937039] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.943048] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.950159] UBI: max/mean erase counter: 17/8, WL threshold: 4096, image sequence number: 1925294910
[    1.959276] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.968492] UBI: background thread "ubi_bgt0d" started, PID 1085
[    1.968497] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.972452] ALSA device list:
[    1.972454]   No soundcards found.
[    1.988782] UBIFS: background thread "ubifs_bgt0_0" started, PID 1087
[    2.017991] UBIFS: recovery needed
[    2.134079] UBIFS: recovery completed
[    2.137765] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.143685] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.152819] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.162704] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.167744] UBIFS: media format: w4/r0 (latest is w4/r0), UUID D2E2157C-794A-4932-956B-E22078A65162, small LPT model
[    2.178781] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.186186] devtmpfs: mounted
[    2.189320] Freeing unused kernel memory: 208K (c06e9000 - c071d000)
[    3.029550] random: dd urandom read with 0 bits of entropy available
[    3.407327] 
[    3.407327] bcm54xx_config_init
[    4.017345] 
[    4.017345] bcm54xx_config_init
[    8.018146] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.024252] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   37.284121] In axi fpga driver!
[   37.287215] request_mem_region OK!
[   37.290581] AXI fpga dev virtual address is 0xdfa10000
[   37.295708] *base_vir_addr = 0xc51e
[   37.310380] In fpga mem driver!
[   37.313715] request_mem_region OK!
[   37.317329] fpga mem virtual address is 0xe2000000
[   38.155315] 
[   38.155315] bcm54xx_config_init
[   38.795260] 
[   38.795260] bcm54xx_config_init
[   42.795678] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   42.801781] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  445.484756] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=612 Chain[5] voltage_pic=142 value=860
Fix freq=612 Chain[6] voltage_pic=142 value=860
Fix freq=612 Chain[7] voltage_pic=142 value=860
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 0 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 23 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J6] has no freq in PIC, set default freq=612M
Chain[J6] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:612 
Asic[ 1]:612 Asic[ 2]:612 Asic[ 3]:612 Asic[ 4]:612 Asic[ 5]:612 Asic[ 6]:612 Asic[ 7]:612 Asic[ 8]:612 
Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612 Asic[16]:612 
Asic[17]:612 Asic[18]:612 Asic[19]:612 Asic[20]:612 Asic[21]:612 Asic[22]:612 Asic[23]:612 Asic[24]:612 
Asic[25]:612 Asic[26]:612 Asic[27]:612 Asic[28]:612 Asic[29]:612 Asic[30]:612 Asic[31]:612 Asic[32]:612 
Asic[33]:612 Asic[34]:612 Asic[35]:612 Asic[36]:612 Asic[37]:612 Asic[38]:612 Asic[39]:612 Asic[40]:612 
Asic[41]:612 Asic[42]:612 Asic[43]:612 Asic[44]:612 Asic[45]:612 Asic[46]:612 Asic[47]:612 Asic[48]:612 
Asic[49]:612 Asic[50]:612 Asic[51]:612 Asic[52]:612 Asic[53]:612 Asic[54]:612 Asic[55]:612 Asic[56]:612 
Asic[57]:612 Asic[58]:612 Asic[59]:612 Asic[60]:612 Asic[61]:612 Asic[62]:612 
Chain:5 max freq=612
Chain:5 min freq=612

max freq = 612
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:28 remote:30 offset:28 
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=07
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:28 remote:30 offset:28 
Chain[J6] chip[244] get middle temp offset=28 typeID=55
Chain[J6] set working voltage=860 [142]
setStartTimePoint total_tv_start_sys=1469 total_tv_end_sys=1470
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=69.1220 Asic[02]=69.9600 Asic[03]=65.8500 Asic[04]=68.9040 Asic[05]=67.1420 Asic[06]=65.1120 Asic[07]=72.2590 Asic[08]=66.9570 
Asic[09]=69.1220 Asic[10]=51.8580 Asic[11]=67.6960 Asic[12]=71.4200 Asic[13]=68.5180 Asic[14]=69.2220 Asic[15]=66.6890 Asic[16]=69.2060 
Asic[17]=64.1050 Asic[18]=67.6450 Asic[19]=69.7260 Asic[20]=68.3670 Asic[21]=72.1080 Asic[22]=68.6350 Asic[23]=67.3100 Asic[24]=67.0920 
Asic[25]=73.5680 Asic[26]=69.0210 Asic[27]=68.4000 Asic[28]=73.5170 Asic[29]=73.8190 Asic[30]=71.7050 Asic[31]=70.7660 Asic[32]=66.4710 
Asic[33]=73.7690 Asic[34]=72.1420 Asic[35]=71.3190 Asic[36]=71.2860 Asic[37]=66.6220 Asic[38]=71.9570 Asic[39]=71.6890 Asic[40]=66.9570 
Asic[41]=68.9200 Asic[42]=71.9400 Asic[43]=70.1110 Asic[44]=37.4800 Asic[45]=68.0140 Asic[46]=74.5070 Asic[47]=65.1450 Asic[48]=72.3090 
Asic[49]=70.9670 Asic[50]=70.6990 Asic[51]=72.4770 Asic[52]=67.6120 Asic[53]=64.7930 Asic[54]=71.9400 Asic[55]=69.5080 Asic[56]=74.4900 
Asic[57]=35.8690 Asic[58]=67.0750 Asic[59]=71.0340 Asic[60]=67.7630 Asic[61]=66.1520 Asic[62]=70.8500 Asic[63]=69.6420 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=28, device 152
Chain[5] Chip[62] local Temp=49
Chain[5] Chip[62] middle Temp=57
Chain[5] Chip[62] middle Temp=57
Done read temp on Chain[5]
FAN PWM: 100
read_temp_func Done!
CRC error counter=1006

follow the photo of how it is
https://imgur.com/a/43Xo4TM

mikeywith

legendary

Activity: 2170

Merit: 6279

be constructive or S.T.F.U

I am not sure how Phill and Bitmaxz missed this part

Code:

driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 4443.857658, ideal hash rate = 13500

Well, it's probably OP's fault for not adding screenshots of the miner status page, anyway the miner seems to be working just fine despite the wrong fan reading, it's very common for these cheap fan replacements to report 30k rpm, but most of the time the miner will work just fine.

Your issue isn't fan-related, you simply have two dead boards and it shows very clearly the full kernel log you posted in the last post

Code:

driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 23 asic

J7 and J8 are showing <63 Asics which is why they won't work, it's the reason why in the first log the miner reported 4.4th out of the ideal 13.5 which is really just about ideal/number of hashboards, your miner worked fine all along with a single hash board, if it keeps rebooting then it's because it's trying to detect chips on the other two hash boards, which are likely dead and gone, so just unplug them and leave the miner with one hash board.

Of course, try the Sdcard firmware upgrade method and whatnot, you might get lucky, also try to test the hash boards one by one just to eliminate PSU-related issues.

BitMaxz

legendary

Activity: 3248

Merit: 2971

Block halving is coming.

Quote from: sladejr on November 01, 2021, 12:22:44 AM

how do i disable fan by braiins? could you show me how to do it?

It should work without disabling the fan but you can read this
- https://docs.braiins.com/os/open-source-en/Configuration/index_configuration.html#temperature-and-fan-control

You can also try to repair the fan maybe that fan that gives you a false signal have a cut wire connection if you have a multimeter check the connection from the yellow wire it should be for RPM signal and the BLUE one should be the PWM usually if this one has no connection the signal for PWM always fixed at 100%.
So focus on the yellow wire you can check the terminal or plug if there is corrosion clean it with petrol or laquer flo thinner or if you don't have then you can try alcohol it would also work. Or you can replace/jumper the yellow wire directly to the control board.

sladejr

newbie

Activity: 7

Merit: 0

how do i disable fan by braiins? could you show me how to do it?

sladejr

newbie

Activity: 7

Merit: 0

the only test I still couldn't do was changing the fan but I'll do it soon, but I've tested the firmware change and it didn't work and the control board started to show some problems like when I turn on without the signal cables it's lighting up the lights as if they were connected

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

sladejr

newbie

Activity: 7

Merit: 0

here now only chain 5 is working, chains 6 and 7 are not working, what do you think it is? I will send the kernel as is

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000297] ps7-ttc #0 at df804000, irq=43
[    0.000601] Console: colour dummy device 80x30
[    0.000632] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040198] pid_max: default: 32768 minimum: 301
[    0.040408] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040427] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042608] CPU: Testing write buffer coherency: ok
[    0.042928] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042985] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043204] L310 cache controller enabled
[    0.043224] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120987] CPU1: Booted secondary processor
[    0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210349] Brought up 2 CPUs
[    0.210368] SMP: Total of 2 processors activated.
[    0.210377] CPU: All CPU(s) started in SVC mode.
[    0.211048] devtmpfs: initialized
[    0.213482] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214690] regulator-dummy: no parameters
[    0.221693] NET: Registered protocol family 16
[    0.223932] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226204] cpuidle: using governor ladder
[    0.226217] cpuidle: using governor menu
[    0.233588] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235108] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235121] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235235] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.256799] bio: create slab  at 0
[    0.258206] vgaarb: loaded
[    0.258895] SCSI subsystem initialized
[    0.259786] usbcore: registered new interface driver usbfs
[    0.259956] usbcore: registered new interface driver hub
[    0.260178] usbcore: registered new device driver usb
[    0.261576] media: Linux media interface: v0.10
[    0.261737] Linux video capture interface: v2.00
[    0.261975] pps_core: LinuxPPS API ver. 1 registered
[    0.261987] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262114] PTP clock support registered
[    0.262472] EDAC MC: Ver: 3.0.0
[    0.263651] Advanced Linux Sound Architecture Driver Initialized.
[    0.266395] DMA-API: preallocated 4096 debug entries
[    0.266410] DMA-API: debugging enabled by kernel config
[    0.266480] Switched to clocksource arm_global_timer
[    0.286540] NET: Registered protocol family 2
[    0.287205] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287262] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287347] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287389] TCP: reno registered
[    0.287407] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287438] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287672] NET: Registered protocol family 1
[    0.288012] RPC: Registered named UNIX socket transport module.
[    0.288025] RPC: Registered udp transport module.
[    0.288033] RPC: Registered tcp transport module.
[    0.288041] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288053] PCI: CLS 0 bytes, default 64
[    0.288487] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290504] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292593] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.292784] msgmni has been set to 967
[    0.293551] io scheduler noop registered
[    0.293564] io scheduler deadline registered
[    0.293602] io scheduler cfq registered (default)
[    0.301303] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.301322] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.425007] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.992514] console [ttyPS0] enabled
[    0.996802] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.004402] [drm] Initialized drm 1.1.0 20060810
[    1.021455] brd: module loaded
[    1.030878] loop: module loaded
[    1.040285] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.046037] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.053941] libphy: XEMACPS mii bus: probed
[    1.058619] ------------- phy_id = 0x3625e62
[    1.063352] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.072219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.079016] ehci-pci: EHCI PCI platform driver
[    1.086230] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.093065] usbcore: registered new interface driver usb-storage
[    1.099929] mousedev: PS/2 mouse device common for all mice
[    1.106004] i2c /dev entries driver
[    1.112914] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.118427] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.124292] Xilinx Zynq CpuIdle Driver started
[    1.129165] sdhci: Secure Digital Host Controller Interface driver
[    1.135258] sdhci: Copyright(c) Pierre Ossman
[    1.139684] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.146420] mmc0: no vqmmc regulator found
[    1.150461] mmc0: no vmmc regulator found
[    1.186501] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.195188] usbcore: registered new interface driver usbhid
[    1.200707] usbhid: USB HID core driver
[    1.205425] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.211717] nand: Micron MT29F2G08ABAEAWP
[    1.215690] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.221641] Bad block table found at page 131008, version 0x01
[    1.227860] Bad block table found at page 130944, version 0x01
[    1.233908] 3 ofpart partitions found on MTD device pl353-nand
[    1.239676] Creating 3 MTD partitions on "pl353-nand":
[    1.244786] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.252814] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.260135] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.270842] TCP: cubic registered
[    1.274081] NET: Registered protocol family 17
[    1.278774] Registering SWP/SWPB emulation handler
[    1.284639] regulator-dummy: disabling
[    1.288960] UBI: attaching mtd1 to ubi0
[    1.815887] UBI: scanning is finished
[    1.827588] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.834644] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.841439] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.848115] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.854954] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.860964] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.868074] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.877105] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.886302] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.886308] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.890287] ALSA device list:
[    1.890291]   No soundcards found.
[    1.906679] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.956994] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.962922] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.972067] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.981945] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.986981] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    1.998493] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.005670] devtmpfs: mounted
[    2.008801] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.851049] random: dd urandom read with 1 bits of entropy available
[    3.236521] 
[    3.236521] bcm54xx_config_init
[    4.306510] 
[    4.306510] bcm54xx_config_init
[    8.307342] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.313448] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   24.728896] In axi fpga driver!
[   24.731963] request_mem_region OK!
[   24.735353] AXI fpga dev virtual address is 0xdf9fe000
[   24.740489] *base_vir_addr = 0xc51e
[   24.755113] In fpga mem driver!
[   24.758480] request_mem_region OK!
[   24.762011] fpga mem virtual address is 0xe2000000
[   25.546534] 
[   25.546534] bcm54xx_config_init
[   26.646522] 
[   26.646522] bcm54xx_config_init
[   30.647359] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.653463] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  758.481313] random: nonblocking pool is initialized
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fe9000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5de2000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8142c4c97990481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000a0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[9] has core num=2
main.c:9113: Chain[5] ASIC[43] has core num=15
main.c:9113: Chain[5] ASIC[52] has core num=3
main.c:9113: Chain[5] ASIC[56] has core num=2
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:22] [63:5] [63:24] [63:35] [63:36] [63:87] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[9] has core num=4
main.c:9113: Chain[7] ASIC[17] has core num=1
main.c:9113: Chain[7] ASIC[26] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[5], value=880
main.c:9183: get PIC voltage=74 on chain[7], value=900
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,-2,0,0,0,0,33,0
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 2
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 2, total chain num = 2 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:14741:  calling the get rate, writing rate:9000
main.c:13927: bmminer not found= 1827 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8142c4c97990481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=30600
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=30600
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6000
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=30600
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x01 0x49 0x02 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x05 0x49 0x08 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=2 : 2
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=880
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x02 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x08 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=2 : 2
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:22] [63:5] [63:24] [63:35] [63:36] [63:87] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x4a 0x0c 0x4a 0x04 0x4a 0x0e 0x4a 0x01 0x4a 0x01 0x4a 0x06 0x4a 0x0f 0x4a 0x0e 0x4a 0x05 0x4a 0x04 0x4a 0x0e 0x4a 0x0f 0x4a 0x0d 0x4a 0x02 0x4a 0x0a 0x4a 0x07 0x4a 0x05 0x4a 0x0a 0x4a 0x23 0x4a 0x08 0x4a 0x0f 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4b 0x00 0x4b 0x00 0x4b 
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=900
driver-btm-c5.c:13178:bitmain_c5_init: Chain[J8] test patten OK temp=-113
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=6 value=940
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J7] will use backup chain_voltage_pic=880 [108]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J7] get working chain_voltage_pic=108
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=74 value=900
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J7] has 0 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 0 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[43] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[52] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=2
driver-btm-c5.c:4571:set_frequency: miner total rate=4540GH/s ideal_total_hash_rate = 4500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=643
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=643


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=643
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=643

driver-btm-c5.c:5119:set_frequency: max freq = 643
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 4540, fixed_totalRate = 4500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J6] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[6] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[6] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[6] chip[244] local:27 remote:29 offset:28 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J6] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=187 total_tv_end_sys=188
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 43
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:10487:check_system_work: voltage_check_done
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 4672.922475, ideal hash rate = 4500
driver-btm-c5.c:10382:check_system_work: hash rate is ok now
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 4604, ideal_total_hash_rate = 4500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 4619, ideal_total_hash_rate = 4500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 4635, ideal_total_hash_rate = 4500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
driver-btm-c5.c:10200:check_avg_rate: avg_rate = 4634, ideal_total_hash_rate = 4500
driver-btm-c5.c:10205:check_avg_rate: avg hash rate is OK
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=73.4170 Asic[02]=74.0210 Asic[03]=71.8900 Asic[04]=74.9940 Asic[05]=78.3320 Asic[06]=74.5740 Asic[07]=68.7690 Asic[08]=80.6810 
Asic[09]=73.2820 Asic[10]=71.0510 Asic[11]=69.8930 Asic[12]=75.8330 Asic[13]=81.8050 Asic[14]=75.6650 Asic[15]=69.6250 Asic[16]=78.2150 
Asic[17]=73.1150 Asic[18]=80.4290 Asic[19]=76.7380 Asic[20]=73.1820 Asic[21]=73.7520 Asic[22]=73.8860 Asic[23]=74.7420 Asic[24]=70.7990 
Asic[25]=69.6920 Asic[26]=75.1950 Asic[27]=78.6340 Asic[28]=75.0100 Asic[29]=73.2150 Asic[30]=75.5980 Asic[31]=69.6420 Asic[32]=68.5010 
Asic[33]=77.4930 Asic[34]=75.7990 Asic[35]=70.9500 Asic[36]=75.1950 Asic[37]=70.1450 Asic[38]=65.3970 Asic[39]=69.7260 Asic[40]=72.3090 
Asic[41]=73.9200 Asic[42]=71.2690 Asic[43]=70.5640 Asic[44]=66.8400 Asic[45]=80.0770 Asic[46]=72.9800 Asic[47]=64.7260 Asic[48]=68.6020 
Asic[49]=69.8600 Asic[50]=68.0140 Asic[51]=72.1580 Asic[52]=75.9000 Asic[53]=79.6240 Asic[54]=72.7460 Asic[55]=75.0940 Asic[56]=77.9970 
Asic[57]=71.3030 Asic[58]=72.8290 Asic[59]=69.0210 Asic[60]=76.9230 Asic[61]=75.2290 Asic[62]=69.4400 Asic[63]=71.1180 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
Chain[5] Chip[244] pcb temperature=57
Chain[5] Chip[62] junction temperature=65
Special fix Chain[5] Chip[62] middle Temp = 72
Done read temp on Chain[5]
Max pcb temp : 57
set FAN speed according to: temp_highest=57 temp_top1[PWM_T]=57 temp_top1[TEMP_POS_LOCAL]=57 temp_change=0 fix_fan_steps=0
FAN PWM: 64
read_temp_func Done!
CRC error counter=82

BitMaxz

legendary

Activity: 3248

Merit: 2971

Block halving is coming.

I suggest you edit your post put the kernel log inside the insert code you can find it when you edit your first post and look for "#" button.

Quote from: sladejr on October 30, 2021, 02:00:16 AM

i'll do the test as soon as i get a new fan, but would there be another possible error? because 2 hash cards are showing 0 hash and one of them the status is not complete

Anyway, the other error looks related to temp sensor but I think it's because of the fan that giving a false signal that could affect other hashboard.

You can try to run it on Braiins OS to test if the 3 hash boards will run normally. Then check the Kernel and system logs and paste them here for analysis.

sladejr

newbie

Activity: 7

Merit: 0

i'll do the test as soon as i get a new fan, but would there be another possible error? because 2 hash cards are showing 0 hash and one of them the status is not complete

philipma1957

legendary

Activity: 4116

Merit: 7849

'The right to privacy matters'

sladejr

newbie

Activity: 7

Merit: 0

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000296] ps7-ttc #0 at df804000, irq=43
[    0.000598] Console: colour dummy device 80x30
[    0.000629] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040412] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040432] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042619] CPU: Testing write buffer coherency: ok
[    0.042936] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042993] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043214] L310 cache controller enabled
[    0.043234] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120988] CPU1: Booted secondary processor
[    0.210220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210350] Brought up 2 CPUs
[    0.210369] SMP: Total of 2 processors activated.
[    0.210378] CPU: All CPU(s) started in SVC mode.
[    0.211053] devtmpfs: initialized
[    0.213478] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214683] regulator-dummy: no parameters
[    0.221693] NET: Registered protocol family 16
[    0.223975] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226238] cpuidle: using governor ladder
[    0.226251] cpuidle: using governor menu
[    0.233607] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235128] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235141] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235254] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257115] bio: create slab  at 0
[    0.258494] vgaarb: loaded
[    0.259178] SCSI subsystem initialized
[    0.260094] usbcore: registered new interface driver usbfs
[    0.260288] usbcore: registered new interface driver hub
[    0.260513] usbcore: registered new device driver usb
[    0.261062] media: Linux media interface: v0.10
[    0.261320] Linux video capture interface: v2.00
[    0.261575] pps_core: LinuxPPS API ver. 1 registered
[    0.261587] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.261709] PTP clock support registered
[    0.262071] EDAC MC: Ver: 3.0.0
[    0.263275] Advanced Linux Sound Architecture Driver Initialized.
[    0.266002] DMA-API: preallocated 4096 debug entries
[    0.266016] DMA-API: debugging enabled by kernel config
[    0.266091] Switched to clocksource arm_global_timer
[    0.287221] NET: Registered protocol family 2
[    0.287869] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287926] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288011] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288054] TCP: reno registered
[    0.288071] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288102] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288331] NET: Registered protocol family 1
[    0.288678] RPC: Registered named UNIX socket transport module.
[    0.288690] RPC: Registered udp transport module.
[    0.288699] RPC: Registered tcp transport module.
[    0.288707] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288720] PCI: CLS 0 bytes, default 64
[    0.289146] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291148] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293195] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293389] msgmni has been set to 967
[    0.294157] io scheduler noop registered
[    0.294170] io scheduler deadline registered
[    0.294211] io scheduler cfq registered (default)
[    0.302089] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.302109] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427090] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.994667] console [ttyPS0] enabled
[    0.998936] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.006580] [drm] Initialized drm 1.1.0 20060810
[    1.023653] brd: module loaded
[    1.033067] loop: module loaded
[    1.042486] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.048614] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.056441] libphy: XEMACPS mii bus: probed
[    1.060809] ------------- phy_id = 0x3625e62
[    1.065530] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.074102] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.080800] ehci-pci: EHCI PCI platform driver
[    1.088042] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.094840] usbcore: registered new interface driver usb-storage
[    1.101702] mousedev: PS/2 mouse device common for all mice
[    1.107842] i2c /dev entries driver
[    1.114720] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.120243] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.126142] Xilinx Zynq CpuIdle Driver started
[    1.130986] sdhci: Secure Digital Host Controller Interface driver
[    1.137119] sdhci: Copyright(c) Pierre Ossman
[    1.141420] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.148230] mmc0: no vqmmc regulator found
[    1.152248] mmc0: no vmmc regulator found
[    1.196113] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.204784] usbcore: registered new interface driver usbhid
[    1.210292] usbhid: USB HID core driver
[    1.215009] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221304] nand: Micron MT29F2G08ABAEAWP
[    1.225273] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231210] Bad block table found at page 131008, version 0x01
[    1.237430] Bad block table found at page 130944, version 0x01
[    1.243481] 3 ofpart partitions found on MTD device pl353-nand
[    1.249266] Creating 3 MTD partitions on "pl353-nand":
[    1.254354] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262401] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.269736] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.280466] TCP: cubic registered
[    1.283698] NET: Registered protocol family 17
[    1.288392] Registering SWP/SWPB emulation handler
[    1.294274] regulator-dummy: disabling
[    1.298605] UBI: attaching mtd1 to ubi0
[    1.825474] UBI: scanning is finished
[    1.837126] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.844182] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.850977] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.857654] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.864492] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.870502] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.877613] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1113221046
[    1.886643] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.895840] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.895845] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.899844] ALSA device list:
[    1.899848]   No soundcards found.
[    1.916182] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.972485] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.978441] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.987543] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.997429] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.002458] UBIFS: media format: w4/r0 (latest is w4/r0), UUID E8A4479F-B15D-4C7A-964D-0F246E2BB6ED, small LPT model
[    2.013994] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.021191] devtmpfs: mounted
[    2.024296] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.863760] random: dd urandom read with 1 bits of entropy available
[    3.246134] 
[    3.246134] bcm54xx_config_init
[    4.316146] 
[    4.316146] bcm54xx_config_init
[    8.316962] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    8.323068] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   24.616702] In axi fpga driver!
[   24.619769] request_mem_region OK!
[   24.623159] AXI fpga dev virtual address is 0xdf9fe000
[   24.628291] *base_vir_addr = 0xc51e
[   24.643040] In fpga mem driver!
[   24.646383] request_mem_region OK!
[   24.649884] fpga mem virtual address is 0xe2000000
[   25.456145] 
[   25.456145] bcm54xx_config_init
[   26.546138] 
[   26.546138] bcm54xx_config_init
[   30.546970] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   30.553078] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6fb1000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5daa000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8142c4c97990481c
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x000000e0
driver-bitmain.c:1946: Find hashboard on Chain[5]
driver-bitmain.c:1946: Find hashboard on Chain[6]
driver-bitmain.c:1946: Find hashboard on Chain[7]
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[5] has freq in PIC and will jump over...
main.c:9103: Chain[5] has core num in PIC
main.c:9113: Chain[5] ASIC[35] has core num=1
main.c:9113: Chain[5] ASIC[52] has core num=1
main.c:9113: Chain[5] ASIC[56] has core num=1
main.c:9113: Chain[5] ASIC[61] has core num=1
main.c:9113: Chain[5] ASIC[62] has core num=1
main.c:2282: Check chain[5] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[6] has freq in PIC and will jump over...
main.c:9103: Chain[6] has core num in PIC
main.c:9113: Chain[6] ASIC[9] has core num=2
main.c:9113: Chain[6] ASIC[43] has core num=15
main.c:9113: Chain[6] ASIC[52] has core num=3
main.c:9113: Chain[6] ASIC[56] has core num=2
main.c:2282: Check chain[6] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[7]: [63:22] [63:5] [63:24] [63:35] [63:36] [63:87] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[7] has freq in PIC and will jump over...
main.c:9103: Chain[7] has core num in PIC
main.c:9113: Chain[7] ASIC[9] has core num=4
main.c:9113: Chain[7] ASIC[17] has core num=1
main.c:9113: Chain[7] ASIC[26] has core num=1
main.c:2282: Check chain[7] PIC fw version=0x03
main.c:9183: get PIC voltage=108 on chain[5], value=880
main.c:9183: get PIC voltage=108 on chain[6], value=880
main.c:9183: get PIC voltage=142 on chain[7], value=860
main.c:9349: chain[5] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[5] temp chip I2C addr=0x98
main.c:9372: chain[5] has no middle temp, use special fix mode.
main.c:9349: chain[6] temp offset record: 62,0,0,0,0,0,35,28
main.c:9366: chain[6] temp chip I2C addr=0x98
main.c:9372: chain[6] has no middle temp, use special fix mode.
main.c:9349: chain[7] temp offset record: 62,-2,0,0,0,0,33,0
main.c:9366: chain[7] temp chip I2C addr=0x98
main.c:13956: total_exist_chain_num = 3
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649: 
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 3, total chain num = 3 
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1830 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:18:27 CST 2019 type: Antminer S9
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8142c4c97990481c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=30600
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=30600
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=30600
driver-btm-c5.c:13108:bitmain_c5_init: chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x47 0x00 0x47 0x04 0x47 0x07 0x47 0x00 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x03 0x47 0x01 0x47 0x02 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x0f 0x47 0x05 0x47 0x08 0x47 0x23 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 0x00 0x47 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=2 : 2
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J6] has backup chain_voltage=880
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[5] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x00 0x49 0x00 0x49 0x04 0x49 0x09 0x49 0x00 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x03 0x49 0x01 0x49 0x02 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x0f 0x49 0x05 0x49 0x08 0x49 0x23 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 0x00 0x49 
driver-btm-c5.c:13149:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:13155:bitmain_c5_init: Detect: S9_63 use voltage level=2 : 2
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J7] has backup chain_voltage=880
driver-btm-c5.c:13188:bitmain_c5_init: No scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[6] PIC fw version=0x03
driver-btm-c5.c:13108:bitmain_c5_init: chain[7]: [63:22] [63:5] [63:24] [63:35] [63:36] [63:87] [63:255] [63:255]
driver-btm-c5.c:13122:bitmain_c5_init: last_freq: 0x00 0x7d 0x0f 0x4a 0x0c 0x4a 0x04 0x4a 0x0e 0x4a 0x01 0x4a 0x01 0x4a 0x06 0x4a 0x0f 0x4a 0x0e 0x4a 0x05 0x4a 0x04 0x4a 0x0e 0x4a 0x0f 0x4a 0x0d 0x4a 0x02 0x4a 0x0a 0x4a 0x07 0x4a 0x05 0x4a 0x0a 0x4a 0x23 0x4a 0x08 0x4a 0x0f 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4b 0x00 0x4b 0x00 0x4b 
driver-btm-c5.c:13171:bitmain_c5_init: Chain[J8] has backup chain_voltage=900
driver-btm-c5.c:13178:bitmain_c5_init: Chain[J8] test patten OK temp=-113
driver-btm-c5.c:13193:bitmain_c5_init: scan based on domain
driver-btm-c5.c:1899:jump_to_app_CheckAndRestorePIC: Check chain[7] PIC fw version=0x03
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 3
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J6] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J7] orignal chain_voltage_pic=108 value=880
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J8] orignal chain_voltage_pic=142 value=860
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J8] will use backup chain_voltage_pic=900 [74]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J8] get working chain_voltage_pic=74
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J6] has 23 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J7] has 63 asic
driver-btm-c5.c:13421:bitmain_c5_init: Chain[J8] has 28 asic
driver-btm-c5.c:13449:bitmain_c5_init: retry Chain[J8] has 63 asic
driver-btm-c5.c:4531:set_frequency: Chain[J6] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[35] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[52] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[56] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[61] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J6] ASIC[62] has core num=1
driver-btm-c5.c:4531:set_frequency: Chain[J7] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[9] has core num=2
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[43] has core num=15
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[52] has core num=3
driver-btm-c5.c:4541:set_frequency: Chain[J7] ASIC[56] has core num=2
driver-btm-c5.c:4531:set_frequency: Chain[J8] has core num in PIC
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[9] has core num=4
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[17] has core num=1
driver-btm-c5.c:4541:set_frequency: Chain[J8] ASIC[26] has core num=1
driver-btm-c5.c:4571:set_frequency: miner total rate=13735GH/s ideal_total_hash_rate = 13500GH/s
driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4598:set_frequency: Chain:5 chipnum=23
driver-btm-c5.c:4618:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 
driver-btm-c5.c:4809:set_frequency: Chain:5 max freq=631
driver-btm-c5.c:4810:set_frequency: Chain:5 min freq=631

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4598:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:4768:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:4773:set_frequency: Chain:6 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
driver-btm-c5.c:4809:set_frequency: Chain:6 max freq=643
driver-btm-c5.c:4810:set_frequency: Chain:6 min freq=643

driver-btm-c5.c:4596:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4598:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4618:set_frequency: Chain[J8] voltage added=0.1V
driver-btm-c5.c:4768:set_frequency: Chain:7 temp offset=-4
driver-btm-c5.c:4773:set_frequency: Chain:7 base freq=675
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:656 Asic[61]:656 Asic[62]:656 
driver-btm-c5.c:4809:set_frequency: Chain:7 max freq=656
driver-btm-c5.c:4810:set_frequency: Chain:7 min freq=650


driver-btm-c5.c:4819:set_frequency: Miner fix freq ...
driver-btm-c5.c:4263:ProcessFixFreqForChips: totalRate = 13735, fixed_totalRate = 13635
driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[5]
driver-btm-c5.c:4855:set_frequency: Chain:5 chipnum=23
driver-btm-c5.c:4874:set_frequency: Chain[J6] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:5 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:5 base freq=631
Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 
Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 
Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 
driver-btm-c5.c:5110:set_frequency: Chain:5 max freq=631
driver-btm-c5.c:5111:set_frequency: Chain:5 min freq=631

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[6]
driver-btm-c5.c:4855:set_frequency: Chain:6 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J7] voltage added=0.0V
driver-btm-c5.c:5058:set_frequency: Chain:6 temp offset=0
driver-btm-c5.c:5063:set_frequency: Chain:6 base freq=643
Asic[ 0]:643 Asic[ 1]:643 Asic[ 2]:643 Asic[ 3]:643 Asic[ 4]:643 Asic[ 5]:643 Asic[ 6]:643 Asic[ 7]:643 
Asic[ 8]:643 Asic[ 9]:643 Asic[10]:643 Asic[11]:643 Asic[12]:643 Asic[13]:643 Asic[14]:643 Asic[15]:643 
Asic[16]:643 Asic[17]:643 Asic[18]:643 Asic[19]:643 Asic[20]:643 Asic[21]:643 Asic[22]:643 Asic[23]:643 
Asic[24]:643 Asic[25]:643 Asic[26]:643 Asic[27]:643 Asic[28]:643 Asic[29]:643 Asic[30]:643 Asic[31]:643 
Asic[32]:643 Asic[33]:643 Asic[34]:643 Asic[35]:643 Asic[36]:643 Asic[37]:643 Asic[38]:643 Asic[39]:643 
Asic[40]:643 Asic[41]:643 Asic[42]:643 Asic[43]:643 Asic[44]:643 Asic[45]:643 Asic[46]:643 Asic[47]:643 
Asic[48]:643 Asic[49]:643 Asic[50]:643 Asic[51]:643 Asic[52]:643 Asic[53]:643 Asic[54]:643 Asic[55]:643 
Asic[56]:643 Asic[57]:643 Asic[58]:643 Asic[59]:643 Asic[60]:643 Asic[61]:643 Asic[62]:643 
driver-btm-c5.c:5110:set_frequency: Chain:6 max freq=643
driver-btm-c5.c:5111:set_frequency: Chain:6 min freq=643

driver-btm-c5.c:4854:set_frequency: read PIC voltage=940 on chain[7]
driver-btm-c5.c:4855:set_frequency: Chain:7 chipnum=63
driver-btm-c5.c:4874:set_frequency: Chain[J8] voltage added=0.1V
driver-btm-c5.c:5058:set_frequency: Chain:7 temp offset=-4
driver-btm-c5.c:5063:set_frequency: Chain:7 base freq=675
Asic[ 0]:650 Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 
Asic[ 8]:650 Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 
Asic[16]:650 Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 
Asic[24]:650 Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 
Asic[32]:650 Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 
Asic[40]:650 Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 
Asic[48]:650 Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 
Asic[56]:650 Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:656 Asic[61]:656 Asic[62]:656 
driver-btm-c5.c:5110:set_frequency: Chain:7 max freq=656
driver-btm-c5.c:5111:set_frequency: Chain:7 min freq=650

driver-btm-c5.c:5119:set_frequency: max freq = 656
driver-btm-c5.c:4162:ProcessFixFreq: totalRate = 13735, fixed_totalRate = 13500
driver-btm-c5.c:9604:init_uart_baud: set baud=1
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J7] PIC temp offset: 62,0,0,0,0,0,35,28,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[7] temp chip I2C addr=0x98
driver-btm-c5.c:6635:calibration_sensor_offset: chain[7] has no middle temp, use special fix mode.
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[7] chip[244] local:26 remote:28 offset:28 
driver-btm-c5.c:6753:calibration_sensor_offset: Chain[J7] chip[244] get middle temp offset=28 typeID=55
driver-btm-c5.c:6593:calibration_sensor_offset: Chain[J8] PIC temp offset: 62,-2,0,0,0,0,33,0,0,0,0,0,0,0,0,0,0,0,
driver-btm-c5.c:6627:calibration_sensor_offset: chain[8] temp chip I2C addr=0x98
driver-btm-c5.c:6660:calibration_sensor_offset: Chain[J8] chip[244] use PIC middle temp offset=-2 typeID=00
driver-btm-c5.c:6765:calibration_sensor_offset: Warning: Chain[J8] has no temp offset in PIC! will fix it
driver-btm-c5.c:6889:calibration_sensor_offset: Chain[J8] use default temp chip[244] 
driver-btm-c5.c:6319:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x98)
driver-btm-c5.c:6331:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9A)
driver-btm-c5.c:6343:do_calibration_sensor_offset: Chain[J8] try read temp chip[244] ID=00 (I2C addr=0x9C)
driver-btm-c5.c:6384:do_calibration_sensor_offset: New offset Chain[8] chip[244] local:-64 remote:-64 offset:21 
driver-btm-c5.c:6894:calibration_sensor_offset: Chain[J8] chip[244] get middle temp offset=21 typeID=00
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:13751:bitmain_c5_init: open core three times
driver-btm-c5.c:12103:set_working_voltage: setting to working voltage...
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 930
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 920
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 910
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[7] set voltage to 900
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 890
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[5] set voltage to 880
driver-btm-c5.c:12083:slowly_downgrade_voltage_all_chain: chain[6] set voltage to 880
driver-btm-c5.c:13954:bitmain_c5_init: start thread for read temp
setStartTimePoint total_tv_start_sys=244 total_tv_end_sys=245
driver-btm-c5.c:10320:check_system_work: restartNum = 2 , auto-reinit enabled...
driver-btm-c5.c:8727:read_temp_func: bring_up_pcb_temp = 45
driver-btm-c5.c:9887:if_avg_hash_ok: avg hash rate = 4443.857658, ideal hash rate = 13500
driver-btm-c5.c:10387:check_system_work: hash rate is low...
do read_temp_func once...

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=0.00000 Asic[23]=0.00000 
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=71.6550 Asic[02]=71.9400 Asic[03]=73.1820 Asic[04]=71.1350 Asic[05]=73.5840 Asic[06]=78.0810 Asic[07]=74.2720 Asic[08]=74.6750 
Asic[09]=75.7650 Asic[10]=72.6620 Asic[11]=72.8630 Asic[12]=68.7860 Asic[13]=68.8200 Asic[14]=69.6080 Asic[15]=69.4400 Asic[16]=69.7590 
Asic[17]=76.3530 Asic[18]=68.6180 Asic[19]=76.6710 Asic[20]=73.0980 Asic[21]=72.6280 Asic[22]=76.9900 Asic[23]=74.9940 Asic[24]=75.8330 
Asic[25]=74.9600 Asic[26]=77.2750 Asic[27]=71.0510 Asic[28]=69.0880 Asic[29]=76.5710 Asic[30]=71.0510 Asic[31]=73.8860 Asic[32]=72.5610 
Asic[33]=75.1280 Asic[34]=73.9530 Asic[35]=73.9870 Asic[36]=75.4470 Asic[37]=78.6850 Asic[38]=72.5780 Asic[39]=73.3330 Asic[40]=76.4700 
Asic[41]=71.3530 Asic[42]=79.7420 Asic[43]=79.0200 Asic[44]=70.4810 Asic[45]=74.5070 Asic[46]=75.9000 Asic[47]=64.0720 Asic[48]=71.0680 
Asic[49]=67.6960 Asic[50]=74.8590 Asic[51]=67.1750 Asic[52]=73.3330 Asic[53]=77.6280 Asic[54]=67.3940 Asic[55]=67.8300 Asic[56]=79.0540 
Asic[57]=69.7760 Asic[58]=70.3130 Asic[59]=83.8860 Asic[60]=75.6820 Asic[61]=73.7190 Asic[62]=68.3160 Asic[63]=76.7720 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=1.57700 Asic[07]=0.00000 Asic[08]=2.04600 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=301.989 Asic[21]=201.326 Asic[22]=0.00000 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=34.7450 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=23.5380 Asic[31]=24.1420 Asic[32]=22.5650 
Asic[33]=23.2690 Asic[34]=0.00000 Asic[35]=805.306 Asic[36]=21.7760 Asic[37]=20.4510 Asic[38]=23.3530 Asic[39]=68.0480 Asic[40]=23.2360 
Asic[41]=838.860 Asic[42]=15.4010 Asic[43]=0.00000 Asic[44]=167.772 Asic[45]=5.10000 Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Asic[20]=301.989000
Asic[21]=201.326000
Asic[35]=805.306000
Asic[41]=838.860000
Asic[44]=167.772000
Done check_asic_reg
Done read temp on Chain[5]
Chain[6] Chip[244] pcb temperature=47
Chain[6] Chip[62] junction temperature=57
Special fix Chain[6] Chip[62] middle Temp = 62
Done read temp on Chain[6]
read failed on Chain[7] Chip[62] middle Temp old value:15
Special fix Chain[7] Chip[62] middle Temp = 15
Done read temp on Chain[7]
Max pcb temp : 47
Read temp failed, set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=692