Topic: HELP - Antminer S9 - Shows no speed after running for 3 minutes ??? (Read 279 times)

Miner Type: Antminer S9-14.0T
Hardware Version: 16.8.1.2
Kernel Version: Linux 3.15.0-xilinx-ge8a2f71-dirty #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
File System Version: Mon Nov 6 17:17:48 CST 2017
Logic Version: S9_V1.47
BMminer Version: 2.0.0
Controller Board Version: 1.20

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000303] ps7-ttc #0 at df804000, irq=43
[    0.000612] Console: colour dummy device 80x30
[    0.000644] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090249] pid_max: default: 32768 minimum: 301
[    0.090473] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090492] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092638] CPU: Testing write buffer coherency: ok
[    0.092976] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093034] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.093255] L310 cache controller enabled
[    0.093275] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.171032] CPU1: Booted secondary processor
[    0.260226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260355] Brought up 2 CPUs
[    0.260375] SMP: Total of 2 processors activated.
[    0.260382] CPU: All CPU(s) started in SVC mode.
[    0.261075] devtmpfs: initialized
[    0.263483] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264697] regulator-dummy: no parameters
[    0.271954] NET: Registered protocol family 16
[    0.274193] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276469] cpuidle: using governor ladder
[    0.276482] cpuidle: using governor menu
[    0.283848] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285365] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285378] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285491] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307203] bio: create slab  at 0
[    0.308607] vgaarb: loaded
[    0.309308] SCSI subsystem initialized
[    0.310325] usbcore: registered new interface driver usbfs
[    0.310507] usbcore: registered new interface driver hub
[    0.310730] usbcore: registered new device driver usb
[    0.311276] media: Linux media interface: v0.10
[    0.311434] Linux video capture interface: v2.00
[    0.311672] pps_core: LinuxPPS API ver. 1 registered
[    0.311684] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.311812] PTP clock support registered
[    0.312181] EDAC MC: Ver: 3.0.0
[    0.313229] Advanced Linux Sound Architecture Driver Initialized.
[    0.316083] DMA-API: preallocated 4096 debug entries
[    0.316096] DMA-API: debugging enabled by kernel config
[    0.316170] Switched to clocksource arm_global_timer
[    0.335993] NET: Registered protocol family 2
[    0.336745] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.336801] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.336886] TCP: Hash tables configured (established 4096 bind 4096)
[    0.336936] TCP: reno registered
[    0.336953] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.336987] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337233] NET: Registered protocol family 1
[    0.337570] RPC: Registered named UNIX socket transport module.
[    0.337582] RPC: Registered udp transport module.
[    0.337591] RPC: Registered tcp transport module.
[    0.337599] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.337612] PCI: CLS 0 bytes, default 64
[    0.338041] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340048] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342158] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.342351] msgmni has been set to 967
[    0.343124] io scheduler noop registered
[    0.343136] io scheduler deadline registered
[    0.343178] io scheduler cfq registered (default)
[    0.352630] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.352650] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.475612] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.043583] console [ttyPS0] enabled
[    1.047863] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.055464] [drm] Initialized drm 1.1.0 20060810
[    1.072439] brd: module loaded
[    1.081829] loop: module loaded
[    1.091230] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.097054] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.104785] libphy: XEMACPS mii bus: probed
[    1.109328] ------------- phy_id = 0x3625e62
[    1.114060] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.122812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.129473] ehci-pci: EHCI PCI platform driver
[    1.136701] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.143505] usbcore: registered new interface driver usb-storage
[    1.150360] mousedev: PS/2 mouse device common for all mice
[    1.156501] i2c /dev entries driver
[    1.163374] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.168902] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.174800] Xilinx Zynq CpuIdle Driver started
[    1.179688] sdhci: Secure Digital Host Controller Interface driver
[    1.185786] sdhci: Copyright(c) Pierre Ossman
[    1.190149] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.197001] mmc0: no vqmmc regulator found
[    1.201014] mmc0: no vmmc regulator found
[    1.246229] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254918] usbcore: registered new interface driver usbhid
[    1.260430] usbhid: USB HID core driver
[    1.265134] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271442] nand: Micron MT29F2G08ABAEAWP
[    1.275402] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281338] Bad block table found at page 131008, version 0x01
[    1.287562] Bad block table found at page 130944, version 0x01
[    1.293614] 3 ofpart partitions found on MTD device pl353-nand
[    1.299407] Creating 3 MTD partitions on "pl353-nand":
[    1.304488] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312543] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319859] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.328798] TCP: cubic registered
[    1.332031] NET: Registered protocol family 17
[    1.336752] Registering SWP/SWPB emulation handler
[    1.342633] regulator-dummy: disabling
[    1.347023] UBI: attaching mtd1 to ubi0
[    1.873588] UBI: scanning is finished
[    1.885169] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.892248] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.899008] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.905673] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.912550] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.918531] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.925639] UBI: max/mean erase counter: 2875/1371, WL threshold: 4096, image sequence number: 767909345
[    1.935115] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.944330] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.944335] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.948303] ALSA device list:
[    1.948306]   No soundcards found.
[    1.964694] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.993851] UBIFS: recovery needed
[    2.080207] UBIFS: recovery completed
[    2.083879] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.089824] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.098931] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.108819] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.113849] UBIFS: media format: w4/r0 (latest is w4/r0), UUID F4300A22-CCD3-41F9-98C8-CD0E0F28FD62, small LPT model
[    2.125377] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.132798] devtmpfs: mounted
[    2.135904] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.977411] random: dd urandom read with 0 bits of entropy available
[    3.366206] 
[    3.366206] bcm54xx_config_init
[    3.976219] 
[    3.976219] bcm54xx_config_init
[    7.977035] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.983135] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.685542] In axi fpga driver!
[   22.688647] request_mem_region OK!
[   22.692001] AXI fpga dev virtual address is 0xdf9fc000
[   22.697142] *base_vir_addr = 0x8c510
[   22.712024] In fpga mem driver!
[   22.715468] request_mem_region OK!
[   22.719085] fpga mem virtual address is 0xe2000000
[   23.485597] 
[   23.485597] bcm54xx_config_init
[   24.115517] 
[   24.115517] bcm54xx_config_init
[   28.115937] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.122040] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[  182.972298] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=600 Chain[5] voltage_pic=23 value=930
Fix freq=600 Chain[6] voltage_pic=23 value=930
Fix freq=600 Chain[7] voltage_pic=23 value=930
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=600M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=600M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=600M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:600 
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600 
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600 
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600 
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600 
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600 
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600 
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600 
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 
Chain:5 max freq=600
Chain:5 min freq=600

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:600 
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600 
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600 
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600 
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600 
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600 
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600 
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600 
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 
Chain:6 max freq=600
Chain:6 min freq=600

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:600 
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600 
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600 
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600 
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600 
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600 
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600 
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600 
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600 
Chain:7 max freq=600
Chain:7 min freq=600

max freq = 600
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:49 remote:55 offset:26 
Chain[J6] chip[244] get middle temp offset=26 typeID=55
Chain[J6] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:48 remote:54 offset:26 
Chain[J6] chip[244] get middle temp offset=26 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:42 remote:46 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J7] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:41 remote:45 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:35 remote:40 offset:26 
Chain[J8] chip[244] get middle temp offset=26 typeID=55
Chain[J8] chip[136] use PIC middle temp offset=28 typeID=00
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:35 remote:40 offset:26 
Chain[J8] chip[244] get middle temp offset=26 typeID=55
Chain[J6] set working voltage=930 [23]
Chain[J7] set working voltage=930 [23]
Chain[J8] set working voltage=930 [23]
setStartTimePoint total_tv_start_sys=72 total_tv_end_sys=73
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=70.5810 Asic[02]=70.2790 Asic[03]=65.0110 Asic[04]=70.2790 Asic[05]=69.7090 Asic[06]=69.9940 Asic[07]=71.3870 Asic[08]=69.3900 
Asic[09]=70.1450 Asic[10]=70.3460 Asic[11]=68.8360 Asic[12]=67.2760 Asic[13]=63.6860 Asic[14]=73.0470 Asic[15]=65.7160 Asic[16]=69.1380 
Asic[17]=68.8200 Asic[18]=70.9340 Asic[19]=68.1820 Asic[20]=65.0620 Asic[21]=66.2020 Asic[22]=70.2290 Asic[23]=67.4610 Asic[24]=67.8800 
Asic[25]=67.3600 Asic[26]=65.9340 Asic[27]=71.9570 Asic[28]=66.2190 Asic[29]=62.1260 Asic[30]=69.8260 Asic[31]=64.8270 Asic[32]=67.4940 
Asic[33]=65.4470 Asic[34]=73.0140 Asic[35]=61.2530 Asic[36]=67.1590 Asic[37]=71.6550 Asic[38]=68.4170 Asic[39]=64.6760 Asic[40]=59.9280 
Asic[41]=67.7960 Asic[42]=70.6650 Asic[43]=74.9270 Asic[44]=62.0080 Asic[45]=67.3430 Asic[46]=63.5180 Asic[47]=70.4810 Asic[48]=60.4980 
Asic[49]=68.2490 Asic[50]=71.5880 Asic[51]=68.6520 Asic[52]=67.5950 Asic[53]=70.1280 Asic[54]=61.7560 Asic[55]=63.9040 Asic[56]=65.9000 
Asic[57]=66.8570 Asic[58]=66.0180 Asic[59]=69.6420 Asic[60]=65.5310 Asic[61]=69.5750 Asic[62]=65.0450 Asic[63]=66.8230 

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=70.2790 Asic[02]=70.2790 Asic[03]=70.7660 Asic[04]=69.6920 Asic[05]=64.0550 Asic[06]=66.2530 Asic[07]=63.9370 Asic[08]=68.3160 
Asic[09]=61.1020 Asic[10]=65.5820 Asic[11]=66.2020 Asic[12]=64.6420 Asic[13]=67.9980 Asic[14]=67.3100 Asic[15]=60.7830 Asic[16]=68.5510 
Asic[17]=64.3740 Asic[18]=66.4200 Asic[19]=65.5820 Asic[20]=66.8730 Asic[21]=69.5080 Asic[22]=65.5650 Asic[23]=63.6860 Asic[24]=68.8870 
Asic[25]=67.6620 Asic[26]=70.9500 Asic[27]=67.7120 Asic[28]=67.6280 Asic[29]=67.8300 Asic[30]=71.3530 Asic[31]=69.2730 Asic[32]=70.2620 
Asic[33]=64.0720 Asic[34]=70.9670 Asic[35]=70.5480 Asic[36]=69.8090 Asic[37]=72.2760 Asic[38]=72.0740 Asic[39]=61.3200 Asic[40]=68.9040 
Asic[41]=68.7360 Asic[42]=71.2690 Asic[43]=63.8030 Asic[44]=63.4010 Asic[45]=70.2790 Asic[46]=69.2560 Asic[47]=67.1420 Asic[48]=66.5710 
Asic[49]=60.1960 Asic[50]=69.9270 Asic[51]=75.6480 Asic[52]=67.6790 Asic[53]=62.5790 Asic[54]=62.9480 Asic[55]=63.3170 Asic[56]=65.3640 
Asic[57]=66.6390 Asic[58]=62.3440 Asic[59]=73.5170 Asic[60]=66.6220 Asic[61]=64.6250 Asic[62]=63.9370 Asic[63]=66.1690 

get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=70.0950 Asic[02]=74.9270 Asic[03]=69.8930 Asic[04]=72.5780 Asic[05]=65.4810 Asic[06]=75.4800 Asic[07]=60.6990 Asic[08]=69.9600 
Asic[09]=65.3800 Asic[10]=69.4740 Asic[11]=63.1490 Asic[12]=72.4770 Asic[13]=67.6620 Asic[14]=67.9140 Asic[15]=72.4770 Asic[16]=70.5640 
Asic[17]=68.0810 Asic[18]=69.0880 Asic[19]=67.0240 Asic[20]=67.0920 Asic[21]=73.2660 Asic[22]=73.2660 Asic[23]=69.4910 Asic[24]=67.0240 
Asic[25]=70.0950 Asic[26]=70.0440 Asic[27]=66.7390 Asic[28]=65.8840 Asic[29]=70.8330 Asic[30]=67.9470 Asic[31]=69.5580 Asic[32]=60.9680 
Asic[33]=74.0370 Asic[34]=67.5950 Asic[35]=73.3830 Asic[36]=71.5540 Asic[37]=66.6890 Asic[38]=69.5080 Asic[39]=68.1150 Asic[40]=63.2330 
Asic[41]=62.8810 Asic[42]=67.3260 Asic[43]=70.8330 Asic[44]=67.4770 Asic[45]=72.4940 Asic[46]=66.0510 Asic[47]=65.8670 Asic[48]=65.5150 
Asic[49]=64.0880 Asic[50]=68.1820 Asic[51]=69.8090 Asic[52]=68.6850 Asic[53]=67.5610 Asic[54]=64.3400 Asic[55]=70.0110 Asic[56]=69.1550 
Asic[57]=72.3760 Asic[58]=64.6250 Asic[59]=64.5750 Asic[60]=70.2120 Asic[61]=67.3940 Asic[62]=70.7990 Asic[63]=68.3670 
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=26
Chain[5] Chip[62] local Temp=76
Chain[5] Chip[62] middle Temp=63
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=27
Chain[6] Chip[62] local Temp=68
Chain[6] Chip[62] middle Temp=58
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=26
Chain[7] Chip[62] local Temp=83
Chain[7] Chip[62] middle Temp=71
Done read temp on Chain[7]
set FAN speed according to: temp_highest=71 temp_top1[PWM_T]=71 temp_top1[TEMP_POS_LOCAL]=83 temp_change=11 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=0