Topic: Help building Rpi with Avalon openwrt image (Read 726 times)
I can't believe it was a simple ip problem. It actually worked! Thanks a lot guys
OP, did you follow these instructions by Canaan Creative
These instructions are for the AvalonMiner 6
https://canaan.io/question/how-do-i-setup-an-avalon6-with-a-raspberry-pi/
These instructions are for the AvalonMiner 721 and AvalonMiner 741
https://canaan.io/question/how-do-i-connect-an-avalonminer-721-and-avalonminer-controller-including-raspberry-pi-1-2-and-3/
These instructions are for the AvalonMiner 6
https://canaan.io/question/how-do-i-setup-an-avalon6-with-a-raspberry-pi/
These instructions are for the AvalonMiner 721 and AvalonMiner 741
https://canaan.io/question/how-do-i-connect-an-avalonminer-721-and-avalonminer-controller-including-raspberry-pi-1-2-and-3/
This might be why : to be honest I have never run into that issue, kind of why i didn't say anything ... so i did a search below might be why......
https://forum.armbian.com/index.php?/announcement/1-1-check-power-supply-check-sd-card-and-check-other-people-experiences/
and the images off Avalon site have the IP set to 192.168.0.100
you have to set the network card on the PC your trying to access the controller on, to 192.168.0.1 hit the second line on your networks card UI after you set the ip don't worry about setting up the other lines just the first two lines.. then hit ok then go to any Internet Browser an type 192.168.0.100 and change in network setting in the Avalon ui you see not the openwrt you might normally see . change that to 192.168.1.100 notice the red 1 that's kind of a big deal from 0 to 1 then reset your network card back by setting it back to defaults then go to any Internet Browser an type 192.168.1.100 that should do it, can't say other wise .
having the wrong ip might be why it seem to not load right.
https://forum.armbian.com/index.php?/announcement/1-1-check-power-supply-check-sd-card-and-check-other-people-experiences/
and the images off Avalon site have the IP set to 192.168.0.100
you have to set the network card on the PC your trying to access the controller on, to 192.168.0.1 hit the second line on your networks card UI after you set the ip don't worry about setting up the other lines just the first two lines.. then hit ok then go to any Internet Browser an type 192.168.0.100 and change in network setting in the Avalon ui you see not the openwrt you might normally see . change that to 192.168.1.100 notice the red 1 that's kind of a big deal from 0 to 1 then reset your network card back by setting it back to defaults then go to any Internet Browser an type 192.168.1.100 that should do it, can't say other wise .
having the wrong ip might be why it seem to not load right.
Hello, i downloaded miner image from Canaans website and tried to install it to my rpi but whatever i do i stuck at "random nonblocking pool initi..." I have an rpi2 , i tried every single release , old ones and latest. Even tried rpi 1 and 3 releases thinking it might work. Tried bunch of different sd cards, still the same.
I burned the image on windows using etcher and few other different image burners.
I also have a rpi1 with this software working(i got it from someone else) , i even tried burning rpi1 version from canaan to a different sd , still stuck at the same thing. I must be doing something wrong.
I appreciate the help.Thanks.
I burned the image on windows using etcher and few other different image burners.
I also have a rpi1 with this software working(i got it from someone else) , i even tried burning rpi1 version from canaan to a different sd , still stuck at the same thing. I must be doing something wrong.
I appreciate the help.Thanks.
Jump to: