Topic: Help! cgminer: "Share above Target" Error (Read 16664 times)

I'm having the same problem, don't know what to do 

[2017-11-18 20:41:58] accepted: 9/9 (diff 0.001), 819.99 kH/s yes!
[2017-11-18 20:42:01] GPU #0: ASUS GTX 980 Ti, 832.25 kH/s
[2017-11-18 20:42:01] accepted: 10/10 (diff 0.001), 821.22 kH/s yes!
[2017-11-18 20:42:02] accepted: 10/11 (diff 0.001), 821.78 kH/s booooo
[2017-11-18 20:42:02] reject reason: Share is above target
[2017-11-18 20:42:02] accepted: 11/12 (diff 0.009), 822.40 kH/s yes!
[2017-11-18 20:42:03] accepted: 12/13 (diff 0.054), 822.94 kH/s yes!
[2017-11-18 20:42:03] accepted: 13/14 (diff 0.001), 823.32 kH/s yes!
[2017-11-18 20:42:05] GPU #0: ASUS GTX 980 Ti, 832.56 kH/s
[2017-11-18 20:42:05] accepted: 14/15 (diff 0.001), 823.93 kH/s yes!
[2017-11-18 20:42:06] accepted: 14/16 (diff 0.001), 824.33 kH/s booooo
[2017-11-18 20:42:06] reject reason: Share is above target
[2017-11-18 20:42:07] accepted: 15/17 (diff 0.016), 824.71 kH/s yes!
[2017-11-18 20:42:08] accepted: 15/18 (diff 0.001), 825.76 kH/s booooo
[2017-11-18 20:42:08] reject reason: Share is above target

Hmm... Not a clue, that was my ten cents on ASIC's. PS. Those aren't errors btw. 

I Adjusted the difficulty last night - been running for 15 hrs with no change to the pool hashrate - cgminer still reports 27(ish) and 22(ish) on the btcguild dashboard. Im still seeing the errors in verbose on cgminer.

The shares under target is in conjunction with the pool diff, yours being 64, if you can adjust I'd put it to 32.

It's not an error, it's a feature. It's just telling you that those shares didn't make the cut.

That would just hide the error....

Wouldn't it make sense to figure out why I'm getting them?

Turn verbose off.

Would this have anything to do with my error I'm getting regarding shares?

Just looked at the numbers and I now see that your hash rate in cgminer seems correct as it has 30 ghs +/- 10% variance. Pool hash rate should be taken with a grain of salt, a few of my miners are regularly 20% off of the miner reported hash rate.

Its about 20c. The miner reports its running at 56c. It runs in a cold concrete garage. I dont believe overheating is the cause.

The miner and it's fans are in an open space to allow max airflow.

Maybe overheating? What's ambient temp and is the area around the miner crowded.

Hi All,

Ive just recieved my Butterfly labs 30GH/s miner and hooked it all up today. This is my first bitcoin miner (used to mine LTC with GPU on cgminer).

Im running the latest GIT version of cgminer on Ubuntu 13.10 Server. Ive compiled it with the --enable-bflsc configure flag.

However my problem is when i run cgminer i see the following error:

 cgminer version 3.8.4 - Started: [2013-12-04 07:57:41]
--------------------------------------------------------------------------------
 (30s):26.93G (avg):26.85Gh/s | A:10928  R:48  HW:14  WU:330.4/m
 ST: 2  SS: 0  NB: 2  LW: 10766  GF: 0  RF: 0
 Connected to stratum-lb-usa48.btcguild.com diff 64 with stratum as user ------
 Block: 2e76b9db...  Diff:707M  Started: [07:58:01]  Best share: 100K
--------------------------------------------------------------------------------
 [P]ool management [ S ]ettings [D]isplay options [Q]uit
 BAL 0:  max 56C 0.89V | 26.93G/27.15Gh/s | A:10992 R:48 HW:14 WU:334.1/m
--------------------------------------------------------------------------------

 [2013-12-04 08:25:18] Share above target
 [2013-12-04 08:25:19] Share above target
 [2013-12-04 08:25:19] Share above target
 [2013-12-04 08:25:19] Share above target
 [2013-12-04 08:25:20] Share above target
 [2013-12-04 08:25:20] Share above target
 [2013-12-04 08:25:20] Share above target
 [2013-12-04 08:25:21] Share above target
 [2013-12-04 08:25:21] Share above target


my worker status on btcguild only reports 20GH/s whereas cgminer average is 26GH/s

My worker on btcguild has been set at 2 and 16 difficulty and makes no difference.


Any ideas on what i can do, im losing about 7-10 GH/s with my current configuration


Thanks