help for a noob | Bitcointalksearch.org

RW02

full member

Activity: 126

Merit: 100

look people giving useless advice.

onto the problem in hand
1 download latest cgminer
2.download zadig tool from same place
3.replace both mining device drivers using zadig to winusb driver
4.unplug the devices
5.plug them back in
6.enter your settings into cgminer like youve done before either by targe line or batch file
7.start cgmine
8.Thank me Grin

9. have fun and happy mining

Meech

hero member

Activity: 924

Merit: 1000

Get a RPi for $35 and save the headache. Mine are plug and play with the distro supplied by RockMiner. I don't have a monitor connected so I just check the pool info.

fivejonnyfive

sr. member

Activity: 294

Merit: 250

If you're using the custom branch of CGminer that Rockminer distributed. They hacked the Icarus driver to work with their hardware. The Icarus is actually an old FPGA miner. What do you mean by Icarus Erupter?

Try using the current version of BFGminer or CGminer. Both should support the R-Box and your other hardware. Good luck.

Personally I'd suggest getting a Raspberry Pi to run your R-boxes. Much lower power consumption than a computer. Distributions like Minepeon make setup rather easy.

volosator

sr. member

Activity: 272

Merit: 250

Advice: use Linux for mining, windows gets you a lot of headache which could be avoided.

Check if you supply enough power for the miners. Run miner as administrator - that could help.

Gleb Gamow

vip

Activity: 1428

Merit: 1145

I have an r-box and when I connect it to my PC it stops the icarus erupter. Somehow, I have them both running now, but the r-box is runs slow.

cgminer shows the device (icarus) is failing to initialize USB init, open device failed -err -12... you need to install a winusb driver for AMU device 1:4 and associate AMU device with WinUSB using zandig.

I keep getting constant error messages on the cgminer window thingy.

Can anyone help?

I hope the above helps you out, bud.

sharlatan

newbie

Activity: 1

Merit: 0

i got a r-box and when i connect it to my pc it stops my icarus erupter i have them both running now somehow but the r-box is now running slow
cg miner says
the device (icarus) is failing to initialise
USB init, open device failed -err -12... you need to install a winusb driver for AMU device 1:4 and associate AMU device with WinUSB using zandig

constant error appearing on the cgminer window.
can anyone help?

Topic: help for a noob (Read 1657 times)