Topic: Help for O/C GTX 1070 to go to 180 Mhs instead of 150 (Read 233 times)
up
Hi,
I tried several configuration, 'till it crashes... at:
Mainly changed Memory from 600 to 1100
Below at Memory 950 Mhz .. it gives 150.5 MH/s ...
Not famous...
Any ideas ?
I tried several configuration, 'till it crashes... at:
Mainly changed Memory from 600 to 1100
- core : 150 Mhz
- Memory: 1000 MHZ
- Power Limit: 90 Watt
Below at Memory 950 Mhz .. it gives 150.5 MH/s ...
Not famous...
Any ideas ?
First of all you may decrease Power Limit to 90-100. And also you can increase Core clock up to 150-180 Mhz
Force the card to p0 state, then overclock the memory to 4500 MHZ, more if you have samsung mem.
I'm really sorry but i didn't understood .. can you give me more explications ?
Force the card to p0 state, then overclock the memory to 4500 MHZ, more if you have samsung mem.
you need to go with +120 on core +600 on memory and 85-90 percent on power limit for a 1070 to get around 30-32 mh/s on ethash algo you give too much power to them there for it can increase the temp a lot.
Ok i'm presently trying ... Let's wait by now i have 143.512 Mh/s
Hello Everybody,
I'm pretty new in mining, and, sorry in advance for my low level of english (i'm french)
I would like to mine mainly ETH, but if more interresting BTG or something else ?
Just bought this configuration and built my first own RIG to mine GPU:
- 6x GIGABYTE- GeForce GTX 1070 WF2 OC 8 Go DDR5 (http://www.gigabyte.fr/Graphics-Card/GV-N1070WF2OC-8GD-rev-20#kf)
- 6x Riser V006
- 1x ASrock H110 BTC+
- 1 Intel G3930
- 1 SSD Kingston 120G
- 2x PSU Corsair RMI1000 1000W
- 1 Standard 8GB RAM
I installed Simple Mining OS . To mine i use Claymore: claymore-eth-v10.2
As a pool i choosed: ethermine.org
My problem is i never go upside 25MH/s (Total 150 Mh/s)
I tried to O/C with simple mining Settings, presently the system is pretty stable with those settings:
* Core MHz: -50
* Memory MHz: 900
* Power Limit: 120
Target Temperature: 75°C
Min Fan Speed: 60%
As soon as i change for example, memory MHZ to 1000 => the system crashed after less than 5 minute and auto reboot..
Can you help me to reach at least 180 Mhz ?
Thanks for Help
you need to go with +120 on core +600 on memory and 85-90 percent on power limit for a 1070 to get around 30-32 mh/s on ethash algo you give too much power to them there for it can increase the temp a lot. I'm pretty new in mining, and, sorry in advance for my low level of english (i'm french)
I would like to mine mainly ETH, but if more interresting BTG or something else ?
Just bought this configuration and built my first own RIG to mine GPU:
- 6x GIGABYTE- GeForce GTX 1070 WF2 OC 8 Go DDR5 (http://www.gigabyte.fr/Graphics-Card/GV-N1070WF2OC-8GD-rev-20#kf)
- 6x Riser V006
- 1x ASrock H110 BTC+
- 1 Intel G3930
- 1 SSD Kingston 120G
- 2x PSU Corsair RMI1000 1000W
- 1 Standard 8GB RAM
I installed Simple Mining OS . To mine i use Claymore: claymore-eth-v10.2
As a pool i choosed: ethermine.org
My problem is i never go upside 25MH/s (Total 150 Mh/s)
I tried to O/C with simple mining Settings, presently the system is pretty stable with those settings:
* Core MHz: -50
* Memory MHz: 900
* Power Limit: 120
Target Temperature: 75°C
Min Fan Speed: 60%
As soon as i change for example, memory MHZ to 1000 => the system crashed after less than 5 minute and auto reboot..
Can you help me to reach at least 180 Mhz ?
Thanks for Help
Hello Everybody,
I'm pretty new in mining, and, sorry in advance for my low level of english (i'm french)
I would like to mine mainly ETH, but if more interresting BTG or something else ?
Just bought this configuration and built my first own RIG to mine GPU:
- 6x GIGABYTE- GeForce GTX 1070 WF2 OC 8 Go DDR5 (http://www.gigabyte.fr/Graphics-Card/GV-N1070WF2OC-8GD-rev-20#kf)
- 6x Riser V006
- 1x ASrock H110 BTC+
- 1 Intel G3930
- 1 SSD Kingston 120G
- 2x PSU Corsair RMI1000 1000W
- 1 Standard 8GB RAM
I installed Simple Mining OS . To mine i use Claymore: claymore-eth-v10.2
As a pool i choosed: ethermine.org
My problem is i never go upside 25MH/s (Total 150 Mh/s)
I tried to O/C with simple mining Settings, presently the system is pretty stable with those settings:
* Core MHz: -50
* Memory MHz: 900
* Power Limit: 120
Target Temperature: 75°C
Min Fan Speed: 60%
As soon as i change for example, memory MHZ to 1000 => the system crashed after less than 5 minute and auto reboot..
Can you help me to reach at least 180 Mhz ?
Thanks for Help
I'm pretty new in mining, and, sorry in advance for my low level of english (i'm french)
I would like to mine mainly ETH, but if more interresting BTG or something else ?
Just bought this configuration and built my first own RIG to mine GPU:
- 6x GIGABYTE- GeForce GTX 1070 WF2 OC 8 Go DDR5 (http://www.gigabyte.fr/Graphics-Card/GV-N1070WF2OC-8GD-rev-20#kf)
- 6x Riser V006
- 1x ASrock H110 BTC+
- 1 Intel G3930
- 1 SSD Kingston 120G
- 2x PSU Corsair RMI1000 1000W
- 1 Standard 8GB RAM
I installed Simple Mining OS . To mine i use Claymore: claymore-eth-v10.2
As a pool i choosed: ethermine.org
My problem is i never go upside 25MH/s (Total 150 Mh/s)
I tried to O/C with simple mining Settings, presently the system is pretty stable with those settings:
* Core MHz: -50
* Memory MHz: 900
* Power Limit: 120
Target Temperature: 75°C
Min Fan Speed: 60%
As soon as i change for example, memory MHZ to 1000 => the system crashed after less than 5 minute and auto reboot..
Can you help me to reach at least 180 Mhz ?
Thanks for Help
Jump to: