Help: GTX 970 Usage fluctuating | Bitcointalksearch.org

XUR_TIP

member

Activity: 227

Merit: 24

Quote from: FP91G on August 19, 2021, 05:19:40 PM

Quote from: MostW4nted on August 19, 2021, 09:41:35 AM

THIS IS THE SOLUTION!! Thank you! Now with all the miners the GPU goes to 100% usage. Mining raven with t-rex i now get 3.9/4 MH/s (vs 1.5/1.6 MH/s as before)... is it good or not?
Thank you again!

AMD Radeon RX 470 4GB - KawPow12.50 Mh/s @ 150W
https://whattomine.com/gpus/24-amd-radeon-rx-470-4gb?cost=0.1
Profit $1.43 per day
Your profit is 3 times less.
I discouraged everyone from mining on 6-7 year old video cards, but if you like it, then continue. Just clean the video card, replace the thermal paste and thermal pads, because during this time the thermal pads lose their properties.

This is worse than mining Ethereum with zombie mode, if this is the only 4gb card he has it's better to insert into pcie x16 slot and fire on lolminer using HiveOS, reward is almost 2$ right now or even more depending on which pool you use

FP91G

legendary

Activity: 1736

Merit: 1071

Quote from: MostW4nted on August 19, 2021, 09:41:35 AM

THIS IS THE SOLUTION!! Thank you! Now with all the miners the GPU goes to 100% usage. Mining raven with t-rex i now get 3.9/4 MH/s (vs 1.5/1.6 MH/s as before)... is it good or not?
Thank you again!

AMD Radeon RX 470 4GB - KawPow12.50 Mh/s @ 150W
https://whattomine.com/gpus/24-amd-radeon-rx-470-4gb?cost=0.1
Profit $1.43 per day
Your profit is 3 times less.
I discouraged everyone from mining on 6-7 year old video cards, but if you like it, then continue. Just clean the video card, replace the thermal paste and thermal pads, because during this time the thermal pads lose their properties.

JayDDee

full member

Activity: 1421

Merit: 225

Quote from: sxemini on August 19, 2021, 08:37:37 AM

For the GTX9x0 you must change to compute mode in the Nvidia Driver. My GTX970 do around 3mh at ERG and after switching to compute mode it run with 37mh for example.

Holy crap! That's why Verthash is so bad on Windows. Linux doesn't have this problem. Thanks.

MostW4nted

newbie

Activity: 3

Merit: 0

Quote from: BitKongy on August 19, 2021, 03:46:02 AM

Gtx970s works better on older Nvidia drivers, new drivers are for fixing issues on RTX GPUs, try older drivers like the 3** series and use Nicehash mining software instead, this will benchmark your GPU for mining and use the best most profitable algorithm for your 970

I tried installing 3 versions of 3** driver (348, 352 and 358) but none of them made my gpu recognizable, idk why. However, using the latest drivers, NiceHash detects the GPU and it mines at 100% usage constant in time.

Quote from: sxemini on August 19, 2021, 08:37:37 AM

No this old nvidia GPU´s have also such option in driver. Newer Nvidia cards didn´t have this. I only know the GTX9x0 series.

Ethash performance goes also up to 21mh for zilliqa mining. Before changing this i get only 3mh or so.

Lol there is nothing to confirm, i confirm it, because i changed this setting in my driver and i see hashrate increased after changing this Roll Eyes

and i described this in the past, but mostly people give a shit about my advices Cheesy

https://abload.de/img/tdzkqf.jpg

THIS IS THE SOLUTION!! Thank you! Now with all the miners the GPU goes to 100% usage. Mining raven with t-rex i now get 3.9/4 MH/s (vs 1.5/1.6 MH/s as before)... is it good or not?
Thank you again!

sxemini

member

Activity: 1558

Merit: 69

Quote from: Skinny48 on August 19, 2021, 08:07:41 AM

Quote from: sxemini on August 19, 2021, 05:45:19 AM

Quote from: MostW4nted on August 19, 2021, 03:34:07 AM

Quote from: FP91G on August 18, 2021, 12:02:13 PM

What is your operating system and driver?
It is advisable to use Windows 10 if you are mining.

I am using Windows 10 Pro, the gpu drivers are the latest from NVidia, 471.68

Quote from: FP91G on August 18, 2021, 12:02:13 PM

GTX 970/1080 And CPU Mining Setup For RavenCoin (RVN)
https://www.youtube.com/watch?v=mhnSz2xhK3g
Check out the settings from this video

I'll take a look, thanks

Quote from: batsonxl on August 18, 2021, 01:29:24 PM

And what abput hashrate? is it fluctuating too?

No, it is nearly constant at a low value I guess (1.5/1.6 MH/s).

For the GTX9x0 you must change to compute mode in the Nvidia Driver. My GTX970 do around 3mh at ERG and after switching to compute mode it run with 37mh for example.

What? Only AMD driver needs to be change to compute mode to work better for mining this is the time I'm hearing about compute mode on Nvidia cards is this for real? Anyone on here please confirm this

No this old nvidia GPU´s have also such option in driver. Newer Nvidia cards didn´t have this. I only know the GTX9x0 series.

Ethash performance goes also up to 21mh for zilliqa mining. Before changing this i get only 3mh or so.

Lol there is nothing to confirm, i confirm it, because i changed this setting in my driver and i see hashrate increased after changing this Roll Eyes

and i described this in the past, but mostly people give a shit about my advices Cheesy

Skinny48

member

Activity: 448

Merit: 18

Quote from: sxemini on August 19, 2021, 05:45:19 AM

Quote from: MostW4nted on August 19, 2021, 03:34:07 AM

Quote from: FP91G on August 18, 2021, 12:02:13 PM

What is your operating system and driver?
It is advisable to use Windows 10 if you are mining.

I am using Windows 10 Pro, the gpu drivers are the latest from NVidia, 471.68

Quote from: FP91G on August 18, 2021, 12:02:13 PM

GTX 970/1080 And CPU Mining Setup For RavenCoin (RVN)
https://www.youtube.com/watch?v=mhnSz2xhK3g
Check out the settings from this video

I'll take a look, thanks

Quote from: batsonxl on August 18, 2021, 01:29:24 PM

And what abput hashrate? is it fluctuating too?

No, it is nearly constant at a low value I guess (1.5/1.6 MH/s).

For the GTX9x0 you must change to compute mode in the Nvidia Driver. My GTX970 do around 3mh at ERG and after switching to compute mode it run with 37mh for example.

What? Only AMD driver needs to be change to compute mode to work better for mining this is the time I'm hearing about compute mode on Nvidia cards is this for real? Anyone on here please confirm this

sxemini

member

Activity: 1558

Merit: 69

Quote from: MostW4nted on August 19, 2021, 03:34:07 AM

Quote from: FP91G on August 18, 2021, 12:02:13 PM

What is your operating system and driver?
It is advisable to use Windows 10 if you are mining.

I am using Windows 10 Pro, the gpu drivers are the latest from NVidia, 471.68

Quote from: FP91G on August 18, 2021, 12:02:13 PM

GTX 970/1080 And CPU Mining Setup For RavenCoin (RVN)
https://www.youtube.com/watch?v=mhnSz2xhK3g
Check out the settings from this video

I'll take a look, thanks

Quote from: batsonxl on August 18, 2021, 01:29:24 PM

And what abput hashrate? is it fluctuating too?

No, it is nearly constant at a low value I guess (1.5/1.6 MH/s).

For the GTX9x0 you must change to compute mode in the Nvidia Driver. My GTX970 do around 3mh at ERG and after switching to compute mode it run with 37mh for example.

BitKongy

member

Activity: 405

Merit: 19

Quote from: MostW4nted on August 19, 2021, 03:34:07 AM

Quote from: FP91G on August 18, 2021, 12:02:13 PM

What is your operating system and driver?
It is advisable to use Windows 10 if you are mining.

I am using Windows 10 Pro, the gpu drivers are the latest from NVidia, 471.68

Quote from: FP91G on August 18, 2021, 12:02:13 PM

GTX 970/1080 And CPU Mining Setup For RavenCoin (RVN)
https://www.youtube.com/watch?v=mhnSz2xhK3g
Check out the settings from this video

I'll take a look, thanks

Quote from: batsonxl on August 18, 2021, 01:29:24 PM

And what abput hashrate? is it fluctuating too?

No, it is nearly constant at a low value I guess (1.5/1.6 MH/s).

Gtx970s works better on older Nvidia drivers, new drivers are for fixing issues on RTX GPUs, try older drivers like the 3** series and use Nicehash mining software instead, this will benchmark your GPU for mining and use the best most profitable algorithm for your 970

MostW4nted

newbie

Activity: 3

Merit: 0

Quote from: FP91G on August 18, 2021, 12:02:13 PM

What is your operating system and driver?
It is advisable to use Windows 10 if you are mining.

I am using Windows 10 Pro, the gpu drivers are the latest from NVidia, 471.68

Quote from: FP91G on August 18, 2021, 12:02:13 PM

GTX 970/1080 And CPU Mining Setup For RavenCoin (RVN)
https://www.youtube.com/watch?v=mhnSz2xhK3g
Check out the settings from this video

I'll take a look, thanks

Quote from: batsonxl on August 18, 2021, 01:29:24 PM

And what abput hashrate? is it fluctuating too?

No, it is nearly constant at a low value I guess (1.5/1.6 MH/s).

batsonxl

member

Activity: 1200

Merit: 26

And what abput hashrate? is it fluctuating too?

FP91G

legendary

Activity: 1736

Merit: 1071

Quote from: MostW4nted on August 18, 2021, 10:29:47 AM

Hi, I’ve started trying hobby-mining with my home pc.
I’ve tried mining RavenCoin through many miners (gminer, t-rex miner, phoenix miner) but all have shown the same problem: as soon as I start mining, my MSI GTX 970 gpu usage starts fluctuating between 0 and 100% while power stays around 50% (https://ibb.co/XLCXBqk).

I already tried to increase paging file size and to force the gpu going in p0 state, with no success.

Any Ideas?
Thank you

SPECS:
CPU: Intel Core i5 4590
GPU: MSI GTX 970 4GB
RAM: Corsair Value select DDR3 1600 MHz 16GB (8x2)
PSU: ALIMENTATORE MODULARE LC-POWER LC8650II 650W 80+ BRONZE
MB: GIGABYTE GA-H97M-HD3

What is your operating system and driver?
It is advisable to use Windows 10 if you are mining.

GTX 970/1080 And CPU Mining Setup For RavenCoin (RVN)
https://www.youtube.com/watch?v=mhnSz2xhK3g
Check out the settings from this video

MostW4nted

newbie

Activity: 3

Merit: 0

Hi, I’ve started trying hobby-mining with my home pc.
I’ve tried mining RavenCoin through many miners (gminer, t-rex miner, phoenix miner) but all have shown the same problem: as soon as I start mining, my MSI GTX 970 gpu usage starts fluctuating between 0 and 100% while power stays around 50% (https://ibb.co/XLCXBqk).

I already tried to increase paging file size and to force the gpu going in p0 state, with no success.

Any Ideas?
Thank you

SPECS:
CPU: Intel Core i5 4590
GPU: MSI GTX 970 4GB
RAM: Corsair Value select DDR3 1600 MHz 16GB (8x2)
PSU: ALIMENTATORE MODULARE LC-POWER LC8650II 650W 80+ BRONZE
MB: GIGABYTE GA-H97M-HD3

Topic: Help: GTX 970 Usage fluctuating (Read 153 times)