do -20 for powertune on 280x, not 20.
Didn't loose any hashingpower from this still howering at 700 KH/sany more variables i can change on?
Topic: [Help] I cannot get full power of my rig. (Read 488 times)
any more variables i can change on?
do -20 for powertune on 280x, not 20.
Treadcurreny set at "8190"
and gpu clock speed at 990
KH/s avarages on 700 KH/s
http://i.gyazo.com/9a9419578b8ab308b6924f655258cbbe.png
Thank you for your help (will try to improve it more
)
Follow up question...
How can lower clock speed on the gpu get the hashrate higer?
and gpu clock speed at 990
KH/s avarages on 700 KH/s
http://i.gyazo.com/9a9419578b8ab308b6924f655258cbbe.png
Thank you for your help (will try to improve it more
)Follow up question...
How can lower clock speed on the gpu get the hashrate higer?
Heres mine for 4x MSI 280x.
First try 1020/1030/1040/1050/1060/1070 engine and choose the best, then try 8191/8192/8193 tc.
api screenshot http://prntscr.com/3fsnq7
Code:
"expiry" : "28",
"queue" : "1",
"scan-time" : "7",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"no-submit-stale" : true,
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-engine" : "850,1080,1060,1050",
"gpu-fan" : "30-60,30-80,30-80,30-80",
"gpu-memclock" : "1400,1500,1500,1500",
"intensity" : "13,13,13,13",
"gpu-powertune" : "-20,-20,-20,-20",
"temp-target" : "75,75,75,75",
"temp-overheat" : "80,80,80,80",
"temp-cutoff" : "85,85,85,85",
"temp-hysteresis" : "3",
"worksize" : "256,256,256,256",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8193,8193,8193,8191"
First is underclocked coz i put my finger in the fan, and now it can only run at 60% speed. For all of them i checked different gpu-engines and tc. "queue" : "1",
"scan-time" : "7",
"failover-only" : true,
"kernel-path" : "/usr/local/bin",
"no-submit-stale" : true,
"auto-fan" : true,
"gpu-threads" : "2",
"gpu-engine" : "850,1080,1060,1050",
"gpu-fan" : "30-60,30-80,30-80,30-80",
"gpu-memclock" : "1400,1500,1500,1500",
"intensity" : "13,13,13,13",
"gpu-powertune" : "-20,-20,-20,-20",
"temp-target" : "75,75,75,75",
"temp-overheat" : "80,80,80,80",
"temp-cutoff" : "85,85,85,85",
"temp-hysteresis" : "3",
"worksize" : "256,256,256,256",
"lookup-gap" : "2,2,2,2",
"thread-concurrency" : "8193,8193,8193,8191"
First try 1020/1030/1040/1050/1060/1070 engine and choose the best, then try 8191/8192/8193 tc.
api screenshot http://prntscr.com/3fsnq7
This rig should be able to run at alteast 1400 KH/s
My consern is that either both 1x -> 16x Powered raiser is bad or the motherboard is to old
Rig spec:
BAMT installed on a 8 GB usb stick
Cooler master 1000W
ASUS p5q se2
Intel Core 2 Quad (socket 775)
4 GB 800 MHz ram
Two pieces 1x -> 16x Powered raiser
Gigabyte 280X OC
MSI 280X Gaming
Could not copy over remotedesktop so i took a screenshot of my settings
http://i.gyazo.com/f9a6fc613d04eb66b0c8cf7096fc5fdd.png
The GUI of BAMT (accessable over lan)
http://i.gyazo.com/30ec8939e8b9a9ba09712c290dd69ff4.png
Little offtopic question...
Is it allowed to give a reward to the one(s) that help out?
My consern is that either both 1x -> 16x Powered raiser is bad or the motherboard is to old
Rig spec:
BAMT installed on a 8 GB usb stick
Cooler master 1000W
ASUS p5q se2
Intel Core 2 Quad (socket 775)
4 GB 800 MHz ram
Two pieces 1x -> 16x Powered raiser
Gigabyte 280X OC
MSI 280X Gaming
Could not copy over remotedesktop so i took a screenshot of my settings
http://i.gyazo.com/f9a6fc613d04eb66b0c8cf7096fc5fdd.png
The GUI of BAMT (accessable over lan)
http://i.gyazo.com/30ec8939e8b9a9ba09712c290dd69ff4.png
Little offtopic question...
Is it allowed to give a reward to the one(s) that help out?
Jump to: