Topic: Help in mining Electroneum with claymore (Read 1308 times)

where we will entry this to below?

Thanks



GPU_FORCE_64BIT_PTR 1
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal MYWALETADDRESS.MYEMAILADDRESS -xpsw x -allpools 1

I am also having issues getting Claymore to mine ETN. I am trying to use an old HD6870. Here is what Claymore shows me, 0h/s.

╔════════════════════════════════════════════════════════════════╗
║           Claymore's CryptoNote AMD GPU Miner v11.2            ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is etn.easyhash.io:3632
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 1
GPU #0: Barts (AMD Radeon HD 6800 Series), 1024 MB available, 14 compute units (pci bus 1:0:0)
POOL version
No ASM binary found for GPU 0
GPU #0 algorithm ASM, -h 448, -dmem 0 (Memory used: 918MB)
Total cards: 1
XMR: Stratum - connecting to 'etn.easyhash.io' <178.62.207.61> port 3632 (unsecure)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - Connected (etn.easyhash.io:3632) (unsecure)
XMR: 02/10/18-15:32:56 - New job from etn.easyhash.io:3632
XMR - Total Speed: 0 H/s, Total Shares: 0, Rejected: 0, Time: 00:01
XMR: GPU0 0 H/s

using "dmem 0" will consequently lose speed.

The correct solution is to increase virtual memory for 8 GB x GPU quantity.

Worked like a charm.!! Thanks a ton

Problem with your virtual memory settings in windows I would say. Cou should set your virtual memory in WIN according to the memory of your GPUs. I have 10 GPUs with each 8 GB in my rig hence my virtual memory size is set to 80 GB.

Try adding -dmem 0

Your -h exceeded on each corresponding GPU, check your GPU hashing capabilities or use -h 0 for auto selection, don't use -dmem 1 as it doubles the GPU memory consumed and your card might not handle it properly.

Im having the same trouble, did you find any solution yet?

have you set the page file to 16gb? check it in advance settings
and add this line in your claymore bat file
-allpools 1

I want to mining   Electroneum with    Claymore's CryptoNote AMD GPU Miner v10.2 Beta  with pool easyhash.io:      ║


this result show me : what i must do ? what's my wrong?


XMR: 1 pool is specified
Main Monero pool is etn.easyhash.io:3632
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 3
GPU #0: Fiji, 4096 MB available, 56 compute units
GPU #1: Tahiti, 3072 MB available, 32 compute units
GPU #1 recognized as Radeon 280X
GPU #2: Hawaii, 8192 MB available, 44 compute units
GPU #2 recognized as Radeon 390X
POOL version
GPU #0 algorithm ASM, -h 1792, -dmem 1 (Memory used: 7526MB)
GPU #1 algorithm ASM, -h 700, -dmem 1 (Memory used: 2940MB)
GPU #2 algorithm ASM, -h 1376, -dmem 1 (Memory used: 5778MB)
Total cards: 3
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'etn.easyhash.io' <188.166.33.244> port 3632 (unsecure)
XMR: Stratum - Connected (etn.easyhash.io:3632) (unsecure)
GPU 2, GpuMiner dk2a failed -4
GPU 2, GpuMiner dk2an0 failed -4
GPU 2, GpuMiner dk2an0 failed -4
GPU 2, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2a failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU0 t=36C fan=10%, GPU1 t=36C fan=20%, GPU2 t=33C fan=31%
WATCHDOG: GPU error, you need to restart miner
Restarting OK, exit...

and my program stop after this message