Topic: (HELP) My mining rig keeps restarting using SMOS and Claymore ver.11.7 (Read 185 times)

Hello, a frind of mine had the same problem as you, and after some troubleshooting we found that the power cable from the powersupply to the riser was defective so juste juste unplug all the power cable and trie them one another till you fide the defective one

up ....

up... please help 

Good morning guys, I just want to know if what causes this error? suddenly I encountered this problem after 3days straight mining. Im using SMOS and ClaymoreV11.7. can anyone can solved my problem?  

[ 36.707871] nvidia-modeset: WARNING: GPU:1: Unable to read EDID for display device DVI-D-0
[ 37.343329] nvidia-modeset: Allocated GPU:2 (GPU-85d0c9d9-efd4-a75f-e65e-8093467363dc) @ PCI:0000:05:00.0
[ 37.374532] nvidia-modeset: WARNING: GPU:2: Unable to read EDID for display device DVI-D-0
[ 38.046344] nvidia-modeset: Allocated GPU:3 (GPU-bc9fc9ba-3c83-2dbc-98bd-5d6e039ea18c) @ PCI:0000:06:00.0
[ 38.085621] nvidia-modeset: WARNING: GPU:3: Unable to read EDID for display device DVI-D-0
[ 80.065148] nvidia-uvm: Loaded the UVM driver in 8 mode, major device number 240
[ 179.528801] NVRM: GPU at PCI:0000:06:00: GPU-bc9fc9ba-3c83-2dbc-98bd-5d6e039ea18c
[ 179.528808] NVRM: GPU Board Serial Number:
[ 179.528812] NVRM: Xid (PCI:0000:06:00): 79, GPU has fallen off the bus.
[ 179.530431] NVRM: GPU at 0000:06:00.0 has fallen off the bus.
[ 179.530431] NVRM: GPU is on Board .
[ 179.530435] NVRM: A GPU crash dump has been created. If possible, please run
NVRM: nvidia-bug-report.sh as root to collect this data before
NVRM: the NVIDIA kernel module is unloaded.
Rig is rebooting due to system error. It could be caused by too much overclock/undervolt.