Resetting boards to Uefi defaults and updating to 1.2.7
Anyone have a similar setup by chance?
Topic: [HELP!!!] My two stacked H110's underhash. 1060S. (Read 213 times)
Is there an huge temperature difference ?
We know that cards can overheat but we also had an issue that our cooling solution was to good for a special 1060 rig => the cards delivered a better hashrate at a higher temperature.
We know that cards can overheat but we also had an issue that our cooling solution was to good for a special 1060 rig => the cards delivered a better hashrate at a higher temperature.
I am on Ethos 1.2.5. All I did was set my MEM/CORE to 3,000 - global fan and power to 80 and ran the overclock.
First thing to do when you have problems is to set everything back to its stock settings and go from there. No sense troubleshooting when you are using overclocks.
Heat issue? Maybe when they get to hot they lower their TPD to not burn up? Ive had similuar issue and that was in regards to heat.
I am on Ethos 1.2.5. All I did was set my MEM/CORE to 3,000 - global fan and power to 80 and ran the overclock.
Have you checked afterburner to see if they reseted to default settings?
I have two H110 motherboards that underpreform.
Upon boot, one hashes 250 M/H and the other 13 GPU board hashes 230-240m/h.
After 6-7 hours I will turn on my rig to find it at 130-140M/H each. Can someone please help me with what i am doing wrong? Upon boot, instead of running at 19M/H some cards run at 15-16m/H. Sometimes as low as 8 or 9.
Upon boot, one hashes 250 M/H and the other 13 GPU board hashes 230-240m/h.
After 6-7 hours I will turn on my rig to find it at 130-140M/H each. Can someone please help me with what i am doing wrong? Upon boot, instead of running at 19M/H some cards run at 15-16m/H. Sometimes as low as 8 or 9.
Jump to: