Here's an overclocking thread with good information on the S3 chips.
https://bitcointalksearch.org/topic/s3-bm1382-overclocking-with-voltage-setting-883197
Topic: HELP - Overclocking Bitmain AntMiner S3+ (Batch 10) ??? (Read 909 times)
You can easily overclock it via the "advanced" tab under "miner configuration" in the web interface. 750W PSU will suffice as long as you use all 4 PCIe connectors.
Expect a power draw up to ~500W - you need to do the math if that's okay with the price you're paying.
Expect a power draw up to ~500W - you need to do the math if that's okay with the price you're paying.
Hi All
I have a few Dragon 1Th miners and have just purchased a Bitmain AntMiner S3+ (Batch 10) with these detail -
'The S3+, is a revised version of S3 running stably at 453GH/s (frequency=225 MHz), while consumes 355 Watt power at the wall. Most miners will be able to run up to 500GH/s but not guaranteed. Over-clocking can be achieved directly from a drop-down list in the user interface.'
Would you guys recommend overclocking it ? Is there a guide here on how to do it ??
At the moment i only have a Corsair 750w PSU (left over from GPU mining !!!)
Anyone advise ?
Thanks
I have a few Dragon 1Th miners and have just purchased a Bitmain AntMiner S3+ (Batch 10) with these detail -
'The S3+, is a revised version of S3 running stably at 453GH/s (frequency=225 MHz), while consumes 355 Watt power at the wall. Most miners will be able to run up to 500GH/s but not guaranteed. Over-clocking can be achieved directly from a drop-down list in the user interface.'
Would you guys recommend overclocking it ? Is there a guide here on how to do it ??
At the moment i only have a Corsair 750w PSU (left over from GPU mining !!!)
Anyone advise ?
Thanks
Jump to: