Help please | Bitcointalksearch.org

FatMagic

full member

Activity: 224

Merit: 100

Quote from: LouReed on April 17, 2013, 09:48:16 PM

Thank you very much for the responses guys! I got it up and running, now I just need to figure out how to boot up to the HD that has Windows pre-installed on it instead of the mobo set up.

Thanks again!!

In the BIOS, make sure the HDD is recognized, and set it as the primary boot device. Restart and you're in Windows

LouReed

hero member

Activity: 732

Merit: 500

Nosce te Ipsum

Thank you very much for the responses guys! I got it up and running, now I just need to figure out how to boot up to the HD that has Windows pre-installed on it instead of the mobo set up.

Thanks again!!

BookLover

hero member

Activity: 533

Merit: 500

^Bitcoin Library of Congress.

If you're mining, don't use crossfire. Wink

Lacan82

sr. member

Activity: 247

Merit: 250

Quote from: LouReed on April 17, 2013, 08:30:07 PM

I am in the process of building my first rig, and I have everything together, but I don't know how to hook up the power supply cables to my GPU's. what I don't know is, there is two connectors on each card, so do I run two cables from the PSU to each card? And second, the cards came with Cross Fire cables. Do I tie the cards together with these as well?

Thanks in advance for your help!

You need to fill all connections on the GPUs

From my understanding card work better when they are working alone. Don't use the cable

LouReed

hero member

Activity: 732

Merit: 500

Nosce te Ipsum

I am in the process of building my first rig, and I have everything together, but I don't know how to hook up the power supply cables to my GPU's. what I don't know is, there is two connectors on each card, so do I run two cables from the PSU to each card? And second, the cards came with Cross Fire cables. Do I tie the cards together with these as well?

Thanks in advance for your help!

Topic: Help please (Read 586 times)