Author

Topic: Help please, antminer s4 (Read 853 times)

newbie
Activity: 7
Merit: 0
April 21, 2015, 07:59:26 AM
#5
got 2 antminer s4 they were working great n couple days ago they stopped mining, when logging into them under status overview the hardware version shows x.x.x.x also cgminer shows nothing just a blank spot where it should show the version. Are these things just expensive paperweights now or what? I've already tried ssh into them to install cgminer, once it restarts its still blank, have also tried updating firmware still no go. Any thoughts?

Did you try with reflashing microSD card. I had similar issues on S2 and every time reflash of microSD did the trick, also those microSD know to brick without reason so you could try with new one.

nope but will defininetly try it, thanks
sr. member
Activity: 461
Merit: 250
April 21, 2015, 05:46:37 AM
#4
got 2 antminer s4 they were working great n couple days ago they stopped mining, when logging into them under status overview the hardware version shows x.x.x.x also cgminer shows nothing just a blank spot where it should show the version. Are these things just expensive paperweights now or what? I've already tried ssh into them to install cgminer, once it restarts its still blank, have also tried updating firmware still no go. Any thoughts?

Did you try with reflashing microSD card. I had similar issues on S2 and every time reflash of microSD did the trick, also those microSD know to brick without reason so you could try with new one.
newbie
Activity: 7
Merit: 0
April 20, 2015, 09:55:19 PM
#3
got 2 antminer s4 they were working great n couple days ago they stopped mining, when logging into them under status overview the hardware version shows x.x.x.x also cgminer shows nothing just a blank spot where it should show the version. Are these things just expensive paperweights now or what? I've already tried ssh into them to install cgminer, once it restarts its still blank, have also tried updating firmware still no go. Any thoughts?

Try to check if there is any burn mark on the blade. Then tighten all connector in the blade & controller.

will try that tomorrow, will post back if it works or not
legendary
Activity: 1190
Merit: 1000
April 20, 2015, 09:19:25 PM
#2
got 2 antminer s4 they were working great n couple days ago they stopped mining, when logging into them under status overview the hardware version shows x.x.x.x also cgminer shows nothing just a blank spot where it should show the version. Are these things just expensive paperweights now or what? I've already tried ssh into them to install cgminer, once it restarts its still blank, have also tried updating firmware still no go. Any thoughts?

Try to check if there is any burn mark on the blade. Then tighten all connector in the blade & controller.
newbie
Activity: 7
Merit: 0
April 20, 2015, 08:59:17 PM
#1
got 2 antminer s4 they were working great n couple days ago they stopped mining, when logging into them under status overview the hardware version shows x.x.x.x also cgminer shows nothing just a blank spot where it should show the version. Are these things just expensive paperweights now or what? I've already tried ssh into them to install cgminer, once it restarts its still blank, have also tried updating firmware still no go. Any thoughts?
Jump to: