Topic: HELP S9 does not show HW version or BMminer version .. does not show hash (Read 187 times)

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000016] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000310] ps7-ttc #0 at df804000, irq=43
[    0.000615] Console: colour dummy device 80x30
[    0.000645] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040210] pid_max: default: 32768 minimum: 301
[    0.040429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040450] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042586] CPU: Testing write buffer coherency: ok
[    0.042916] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042975] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043200] L310 cache controller enabled
[    0.043220] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121037] CPU1: Booted secondary processor
[    0.210231] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210365] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210391] CPU: All CPU(s) started in SVC mode.
[    0.211081] devtmpfs: initialized
[    0.213488] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214701] regulator-dummy: no parameters
[    0.222380] NET: Registered protocol family 16
[    0.224625] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226912] cpuidle: using governor ladder
[    0.226925] cpuidle: using governor menu
[    0.234361] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235884] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235898] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.236009] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257824] bio: create slab  at 0
[    0.259259] vgaarb: loaded
[    0.259963] SCSI subsystem initialized
[    0.260992] usbcore: registered new interface driver usbfs
[    0.261216] usbcore: registered new interface driver hub
[    0.261452] usbcore: registered new device driver usb
[    0.261985] media: Linux media interface: v0.10
[    0.262143] Linux video capture interface: v2.00
[    0.262379] pps_core: LinuxPPS API ver. 1 registered
[    0.262391] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[    0.262511] PTP clock support registered
[    0.262864] EDAC MC: Ver: 3.0.0
[    0.263919] Advanced Linux Sound Architecture Driver Initialized.
[    0.266382] DMA-API: preallocated 4096 debug entries
[    0.266396] DMA-API: debugging enabled by kernel config
[    0.266482] Switched to clocksource arm_global_timer
[    0.287625] NET: Registered protocol family 2
[    0.288274] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.288334] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.288419] TCP: Hash tables configured (established 4096 bind 4096)
[    0.288478] TCP: reno registered
[    0.288494] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.288525] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288751] NET: Registered protocol family 1
[    0.289081] RPC: Registered named UNIX socket transport module.
[    0.289093] RPC: Registered udp transport module.
[    0.289101] RPC: Registered tcp transport module.
[    0.289110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.289123] PCI: CLS 0 bytes, default 64
[    0.289550] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.291552] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293653] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293845] msgmni has been set to 967
[    0.294622] io scheduler noop registered
[    0.294634] io scheduler deadline registered
[    0.294675] io scheduler cfq registered (default)
[    0.306757] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.306778] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.430988] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.998774] console [ttyPS0] enabled
[    1.003034] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.010678] [drm] Initialized drm 1.1.0 20060810
[    1.027782] brd: module loaded
[    1.037197] loop: module loaded
[    1.046892] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.052642] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.060725] libphy: XEMACPS mii bus: probed
[    1.065099] ------------- phy_id = 0x3625e62
[    1.069885] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.078551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.085169] ehci-pci: EHCI PCI platform driver
[    1.092423] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.099312] usbcore: registered new interface driver usb-storage
[    1.106147] mousedev: PS/2 mouse device common for all mice
[    1.112277] i2c /dev entries driver
[    1.119268] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.124751] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.130662] Xilinx Zynq CpuIdle Driver started
[    1.135509] sdhci: Secure Digital Host Controller Interface driver
[    1.141677] sdhci: Copyright(c) Pierre Ossman
[    1.145943] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.152809] mmc0: no vqmmc regulator found
[    1.156850] mmc0: no vmmc regulator found
[    1.196507] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205205] usbcore: registered new interface driver usbhid
[    1.210716] usbhid: USB HID core driver
[    1.215424] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221721] nand: Micron MT29F2G08ABAEAWP
[    1.225690] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231628] Bad block table found at page 131008, version 0x01
[    1.237848] Bad block table found at page 130944, version 0x01
[    1.243900] 3 ofpart partitions found on MTD device pl353-nand
[    1.249679] Creating 3 MTD partitions on "pl353-nand":
[    1.254771] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262833] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270156] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279107] TCP: cubic registered
[    1.282345] NET: Registered protocol family 17
[    1.287063] Registering SWP/SWPB emulation handler
[    1.292934] regulator-dummy: disabling
[    1.297264] UBI: attaching mtd1 to ubi0
[    1.824323] UBI: scanning is finished
[    1.836000] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.843081] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849843] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.856528] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.863364] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.869365] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.876488] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1283732989
[    1.885499] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894732] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.894737] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898683] ALSA device list:
[    1.898686]   No soundcards found.
[    1.915101] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.944141] UBIFS: recovery needed
[    1.965874] UBIFS: recovery completed
[    1.969561] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.975489] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.984631] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.994512] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.999548] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[    2.011068] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.018533] devtmpfs: mounted
[    2.021643] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.865786] random: dd urandom read with 0 bits of entropy available
[    3.276527] 
[    3.276527] bcm54xx_config_init
[    3.886526] 
[    3.886526] bcm54xx_config_init
[    6.887355] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    6.893442] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   20.847362] In axi fpga driver!
[   20.850430] request_mem_region OK!
[   20.853820] AXI fpga dev virtual address is 0xdf9fc000
[   20.858960] *base_vir_addr = 0x8c510
[   20.874381] In fpga mem driver!
[   20.877510] request_mem_region OK!
[   20.881015] fpga mem virtual address is 0xe2000000
[   21.676527] 
[   21.676527] bcm54xx_config_init
[   22.306528] 
[   22.306528] bcm54xx_config_init
[   25.307347] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   25.313365] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
Find Force Freq=600 will search Freq again!
DETECT HW version=0008c510
miner ID : 8132ed281540881c
config file found, will disable freq setting.
Miner Type = S9
AsicType = 1387
real AsicNum = 63
Find /tmp/searcherror: J6:2  The last log is below:
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
Find Force Freq=600 will search Freq again!
DETECT HW version=0008c510
miner ID : 8132ed281540881c
config file found, will disable freq setting.
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Start search freq on chain[5]...
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Start search freq on chain[6]...
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Start search freq on chain[7]...
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set voltage=870 search freq on chain[5]
now set pic voltage=125 on chain[5]
set voltage=870 search freq on chain[6]
now set pic voltage=125 on chain[6]
set voltage=870 search freq on chain[7]
now set pic voltage=125 on chain[7]
enable_pic_dac on chain[5]
enable_pic_dac on chain[6]
enable_pic_dac on chain[7]
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,-5,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-4,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
check chain[5]: asicNum = 0
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry check chain[5]: asicNum = 0
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry check chain[5]: asicNum = 0
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry check chain[5]: asicNum = 0
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry check chain[5]: asicNum = 0
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry check chain[5]: asicNum = 0
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry check chain[5]: asicNum = 0
After Get ASIC NUM CRC error counter=0
The AsicNum=0 on chain[5]