Author

Topic: Help with a wired RX 580 bios (Read 652 times)

full member
Activity: 441
Merit: 109
August 19, 2017, 07:12:01 AM
#15
I had Gigabyte with 21.5 Mh/s stock. Managed to undervolt in bios and OC to 30.2 Mh/s stable. Play with settings or go to anorak site for bioses and users settings.  Wink

your card: https://anorak.tech/t/msi-rx-580-gaming-x/5341?source_topic_id=6483
from https://anorak.tech/t/msi-gaming-x-rx-580-4gb-hynix-memory/6483/3
full member
Activity: 218
Merit: 100
August 19, 2017, 06:44:32 AM
#14
Lol.
Just too finicky man. Was I right to bump the village though. Was that the reason it would drop down to 1000mhz everytime the core went up?
full member
Activity: 218
Merit: 100
August 18, 2017, 10:33:53 PM
#13
I don't want to brick it lol. And this does not have dual bios so if I brick it I'm fuc**d.

I will try the editor suggested above. I tried a version of 1.5 and it could read them but would not allow me to change them. This might be different though.

Do you still need help with bios mod?

Yes please Roll Eyes.

Here you go. Straps from 1500 to 2000. Please provide me feedback if it works.
http://s000.tinyupload.com/?file_id=05316166093774545400

This card is a BIA¥©H lol.
So loaded the bios you cooked, which seem to be great by the way, and no effect.
Checked stats, memory would get stuck at 1750. OC'd with claymore to 1850 no change. Changed to 2000 it would go between 27mhz and 12 mhz. Noticed that the memory clock would go down to 1000 when cock hit 1130. Dropped all the way to 1850 at 25 intervals, same thing  crash. Increased voltage on claymore a little. Everything crashed. Left voltage as is but dropped clock rate. CRASH. This was all done on claymore 9.8.
Installed the new Afterburner beta. Same problem.
The only thing that worked, and it took me hours, voltage +7 (not 10, 9,8 or 6), clock at 1130 and memory at 1950. 28MHs STABLE.
All on Afterburner beta.
Very crappy card.
Thank you for your help, you were awesome   
full member
Activity: 158
Merit: 100
August 18, 2017, 07:45:28 PM
#12
Try to extract the rom file using a different program, like GPU-Z.

Nice idea - if you want him to brick it.

No problem here using rom extracted by GPU-Z (the 256KB ones) on Poloaris editor 1.4   Huh



GPU Z has known problem to sometimes add blank spot or forget to copy some numbers therefore u mess up bios. Use atiflash always.

Thank you.

I didn't know that.

Sorry.
newbie
Activity: 26
Merit: 0
August 18, 2017, 07:38:16 PM
#11
are you serious?  Grin I tested my suggestion and it worked, modifications are also applied if done properly.
newbie
Activity: 27
Merit: 0
August 18, 2017, 07:34:24 PM
#10
Try to extract the rom file using a different program, like GPU-Z.

Nice idea - if you want him to brick it.

No problem here using rom extracted by GPU-Z (the 256KB ones) on Poloaris editor 1.4   Huh



GPU Z has known problem to sometimes add blank spot or forget to copy some numbers therefore u mess up bios. Use atiflash always.
full member
Activity: 158
Merit: 100
August 18, 2017, 07:20:58 PM
#9
Try to extract the rom file using a different program, like GPU-Z.

Nice idea - if you want him to brick it.

No problem here using rom extracted by GPU-Z (the 256KB ones) on Poloaris editor 1.4   Huh

full member
Activity: 218
Merit: 100
August 18, 2017, 06:30:35 PM
#8
SWEET.
I'll check it in 45 minutes and will let you know what happens. Thank you. Thank you.
newbie
Activity: 27
Merit: 0
August 18, 2017, 06:20:58 PM
#7
I don't want to brick it lol. And this does not have dual bios so if I brick it I'm fuc**d.

I will try the editor suggested above. I tried a version of 1.5 and it could read them but would not allow me to change them. This might be different though.

Do you still need help with bios mod?

Yes please Roll Eyes.

Here you go. Straps from 1500 to 2000. Please provide me feedback if it works.
http://s000.tinyupload.com/?file_id=05316166093774545400
full member
Activity: 218
Merit: 100
August 18, 2017, 06:01:10 PM
#6
I don't want to brick it lol. And this does not have dual bios so if I brick it I'm fuc**d.

I will try the editor suggested above. I tried a version of 1.5 and it could read them but would not allow me to change them. This might be different though.

Do you still need help with bios mod?

Yes please Roll Eyes.
newbie
Activity: 27
Merit: 0
August 18, 2017, 05:39:26 PM
#5
I don't want to brick it lol. And this does not have dual bios so if I brick it I'm fuc**d.

I will try the editor suggested above. I tried a version of 1.5 and it could read them but would not allow me to change them. This might be different though.

Do you still need help with bios mod?
full member
Activity: 218
Merit: 100
August 18, 2017, 05:28:53 PM
#4
I don't want to brick it lol. And this does not have dual bios so if I brick it I'm fuc**d.

I will try the editor suggested above. I tried a version of 1.5 and it could read them but would not allow me to change them. This might be different though.
full member
Activity: 158
Merit: 100
August 18, 2017, 04:29:23 PM
#3
Try to extract the rom file using a different program, like GPU-Z.

Don't listen to me.
newbie
Activity: 26
Merit: 0
full member
Activity: 218
Merit: 100
August 18, 2017, 04:21:08 PM
#1
I have an MSI RX 580 Gaming X 4GB Elpida. It is stuck at about 24.5 Mhs. I can not mod the bios because any Polaris Editor I tried sees the value as gibrish or empty.
I tried loading some pre made bios I found online and made no difference.
Can someone please help me mod it. The stock file is on my Google drive.
https://drive.google.com/file/d/0B_jbmmShkl7PWExWemtmMHphOHc/view?usp=drivesdk
Jump to: