Help with my Antminer, first it was gave me the "Fan Lost or Fan Speed Low error", I replaced 2 brand new fans however the fan speed is 6720 rpms but I still having the Fan error.
I'm attaching the Kernel log, Do I'm missing something? I'm new on fixing or troubleshooting Antminer. Thank you in advance!
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 27800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 258048
[ 0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map e6fd8000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 496 pages used for memmap
[ 0.000000] HighMem zone: 63488 pages, LIFO batch:15
[ 0.000000] PERCPU: Embedded 8 pages/cpu @e6fc0000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256528
[ 0.000000] Kernel command line: noinitrd mem=1008M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 884108K/1032192K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 148084K reserved, 253952K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06da8ac (6987 kB)
[ 0.000000] .init : 0xc06db000 - 0xc070e380 ( 205 kB)
[ 0.000000] .data : 0xc0710000 - 0xc0757138 ( 285 kB)
[ 0.000000] .bss : 0xc0757144 - 0xc0797bfc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to f0004000
[ 0.000000] zynq_clock_init: clkc starts at f0004100
[ 0.000000] Zynq clock init
[ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000289] ps7-ttc #0 at f0006000, irq=43
[ 0.000588] Console: colour dummy device 80x30
[ 0.000623] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040196] pid_max: default: 32768 minimum: 301
[ 0.040405] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.040426] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.042578] CPU: Testing write buffer coherency: ok
[ 0.042902] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.042959] Setting up static identity map for 0x4cb118 - 0x4cb170
[ 0.043180] L310 cache controller enabled
[ 0.043200] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.120986] CPU1: Booted secondary processor
[ 0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210346] Brought up 2 CPUs
[ 0.210365] SMP: Total of 2 processors activated.
[ 0.210373] CPU: All CPU(s) started in SVC mode.
[ 0.211030] devtmpfs: initialized
[ 0.213449] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214638] regulator-dummy: no parameters
[ 0.221506] NET: Registered protocol family 16
[ 0.223714] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.225966] cpuidle: using governor ladder
[ 0.225978] cpuidle: using governor menu
[ 0.233334] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.234840] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.234854] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.234964] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[ 0.256573] bio: create slab at 0
[ 0.257958] vgaarb: loaded
[ 0.258670] SCSI subsystem initialized
[ 0.259543] usbcore: registered new interface driver usbfs
[ 0.259712] usbcore: registered new interface driver hub
[ 0.259928] usbcore: registered new device driver usb
[ 0.260708] media: Linux media interface: v0.10
[ 0.260865] Linux video capture interface: v2.00
[ 0.261153] pps_core: LinuxPPS API ver. 1 registered
[ 0.261166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.261400] PTP clock support registered
[ 0.261765] EDAC MC: Ver: 3.0.0
[ 0.262958] Advanced Linux Sound Architecture Driver Initialized.
[ 0.265669] DMA-API: preallocated 4096 debug entries
[ 0.265682] DMA-API: debugging enabled by kernel config
[ 0.265750] Switched to clocksource arm_global_timer
[ 0.286227] NET: Registered protocol family 2
[ 0.286869] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.286965] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.287124] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.287186] TCP: reno registered
[ 0.287203] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287252] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.287508] NET: Registered protocol family 1
[ 0.287864] RPC: Registered named UNIX socket transport module.
[ 0.287877] RPC: Registered udp transport module.
[ 0.287885] RPC: Registered tcp transport module.
[ 0.287893] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.287905] PCI: CLS 0 bytes, default 64
[ 0.288330] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.290311] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.291654] bounce pool size: 64 pages
[ 0.292521] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.292725] msgmni has been set to 1486
[ 0.293476] io scheduler noop registered
[ 0.293489] io scheduler deadline registered
[ 0.293531] io scheduler cfq registered (default)
[ 0.305213] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.305233] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.427973] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.999493] console [ttyPS0] enabled
[ 1.003708] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to f0068000
[ 1.011332] [drm] Initialized drm 1.1.0 20060810
[ 1.028380] brd: module loaded
[ 1.037718] loop: module loaded
[ 1.047373] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.053122] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060908] libphy: XEMACPS mii bus: probed
[ 1.065276] ------------- phy_id = 0x3625e62
[ 1.070139] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.078696] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.085307] ehci-pci: EHCI PCI platform driver
[ 1.092533] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.099458] usbcore: registered new interface driver usb-storage
[ 1.106301] mousedev: PS/2 mouse device common for all mice
[ 1.112390] i2c /dev entries driver
[ 1.119291] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124763] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.130678] Xilinx Zynq CpuIdle Driver started
[ 1.135511] sdhci: Secure Digital Host Controller Interface driver
[ 1.141757] sdhci: Copyright(c) Pierre Ossman
[ 1.146057] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152823] mmc0: no vqmmc regulator found
[ 1.156854] mmc0: no vmmc regulator found
[ 1.195779] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.204455] usbcore: registered new interface driver usbhid
[ 1.209969] usbhid: USB HID core driver
[ 1.214681] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.220971] nand: Micron MT29F2G08ABAEAWP
[ 1.224946] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.230902] Bad block table found at page 131008, version 0x01
[ 1.237144] Bad block table found at page 130944, version 0x01
[ 1.243187] 3 ofpart partitions found on MTD device pl353-nand
[ 1.248957] Creating 3 MTD partitions on "pl353-nand":
[ 1.254063] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.262096] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.269399] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.280134] TCP: cubic registered
[ 1.283372] NET: Registered protocol family 17
[ 1.288060] Registering SWP/SWPB emulation handler
[ 1.293954] regulator-dummy: disabling
[ 1.298266] UBI: attaching mtd1 to ubi0
[ 1.826855] UBI: scanning is finished
[ 1.838521] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.845574] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.852370] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.859048] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.865906] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.871874] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.879005] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1754858191
[ 1.888036] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.897253] UBI: background thread "ubi_bgt0d" started, PID 1084
[ 1.897258] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.901141] ALSA device list:
[ 1.901144] No soundcards found.
[ 1.917554] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[ 1.984039] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.990002] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.999098] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.008993] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.014014] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7024E062-5923-42D9-8915-DFE72B38FE49, small LPT model
[ 2.025575] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.032779] devtmpfs: mounted
[ 2.035908] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[ 2.869806] random: dd urandom read with 1 bits of entropy available
[ 3.255793]
[ 3.255793] bcm54xx_config_init
[ 4.345765]
[ 4.345765] bcm54xx_config_init
[ 8.346620] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 8.352727] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 27.097381] In axi fpga driver!
[ 27.100451] request_mem_region OK!
[ 27.103846] AXI fpga dev virtual address is 0xf0200000
[ 27.108982] *base_vir_addr = 0xc51e
[ 27.123995] In fpga mem driver!
[ 27.127310] request_mem_region OK!
[ 27.130824] fpga mem virtual address is 0xf3000000
[ 27.935779]
[ 27.935779] bcm54xx_config_init
[ 29.035792]
[ 29.035792] bcm54xx_config_init
[ 33.036603] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 33.042709] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram: 1039753216
main.c:14025: Detect 1GB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6ff9000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc51e
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5df2000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912
main.c:8570: DETECT HW version=0000c51e
main.c:14064: miner ID : 8040e44162bb8854
main.c:14089: Miner Type = S9
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 63
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x0000000e
driver-bitmain.c:1946: Find hashboard on Chain[1]
driver-bitmain.c:1946: Find hashboard on Chain[2]
driver-bitmain.c:1946: Find hashboard on Chain[3]
main.c:2282: Check chain[1] PIC fw version=0x03
main.c:2282: Check chain[2] PIC fw version=0x03
main.c:2282: Check chain[3] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[1]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[1] has freq in PIC and will jump over...
main.c:9103: Chain[1] has core num in PIC
main.c:2282: Check chain[1] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[2]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[2] has freq in PIC and will jump over...
main.c:9103: Chain[2] has core num in PIC
main.c:2282: Check chain[2] PIC fw version=0x03
main.c:8940: read pic freq and badcore num...
main.c:8961: chain[3]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9099: chain[3] has freq in PIC and will jump over...
main.c:9103: Chain[3] has core num in PIC
main.c:2282: Check chain[3] PIC fw version=0x03
main.c:9183: get PIC voltage=91 on chain[1], value=890
main.c:9183: get PIC voltage=91 on chain[2], value=890
main.c:9183: get PIC voltage=91 on chain[3], value=890
main.c:9349: chain[1] temp offset record: 62,0,0,0,0,0,37,28
main.c:9366: chain[1] temp chip I2C addr=0x98
main.c:9372: chain[1] has no middle temp, use special fix mode.
main.c:9349: chain[2] temp offset record: 62,0,0,0,0,0,37,28
main.c:9366: chain[2] temp chip I2C addr=0x98
main.c:9372: chain[2] has no middle temp, use special fix mode.
main.c:9349: chain[3] temp offset record: 62,0,0,0,0,0,37,28
main.c:9366: chain[3] temp chip I2C addr=0x98
main.c:9372: chain[3] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 3
board_frq_tuning.c:628: single_board_frq_tuning enter
board_frq_tuning.c:629: min_rate, des_rate, fix_volt:13800, 14000, 880
board_frq_tuning.c:254: force_freq not set, don't need tuning
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 1830 root 0:00 grep bmminer
main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12286:bitmain_c5_init: Detect 1GB control board of XILINX
driver-btm-c5.c:12313:bitmain_c5_init: Miner Type = S9
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:17:30 CST 2019 type: Antminer S9j
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 8040e44162bb8854
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3023:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3023:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3023:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3023:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3023:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3023:check_fan_beforeInit: waiting fans become stable...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6720
driver-btm-c5.c:3010:check_fan_beforeInit: Fatal Error: some Fan lost or Fan speed low!
