I THINK WE ARE GOOD
I removed the pause from my batch file..
Damn whoo knew right, Great Idea CryptoCanary
Thanks!!
AND HAPPY MINING!
Topic: Help with Bfg miner, or USB miner stick or website? Don't know yet (Read 1451 times)
http://s9.postimg.org/z2vlfa673/Untitled1.png
I THINK WE ARE GOOD
I removed the pause from my batch file..
Damn whoo knew right, Great Idea CryptoCanary
Thanks!!
AND HAPPY MINING!
I THINK WE ARE GOOD
I removed the pause from my batch file..
Damn whoo knew right, Great Idea CryptoCanary
Thanks!!
AND HAPPY MINING!
March 14, 2015, 11:57:17 AM
The reason the Hash is low, is because I just plugged it in to get the message to show you guys, the normal Hash rate is running at 333 MHz, just like its supposed too via the specs. Also, I noticed on the pool that I was mining on, was before I would see my miner mining on the dashboard of site and see acct balance go up. I ran it for an hour yesterday with the same error messages, and it went up ever so slightly???
The absolute weirdest part, was before I reformatted and right after I reformated it worked with no problems, and now in the past days these error messages??
@CryptoCanary,
How do I do this with my batch file?
Maybe on the pool you could change the worker's difficulty to 16.?
-Diff 16 ?
Also, I will try to run it without the pause cmd, and straight from cmd prompt and let you know what happens.
Thanks for the Replies !!
Happy Mining
The absolute weirdest part, was before I reformatted and right after I reformated it worked with no problems, and now in the past days these error messages??
@CryptoCanary,
How do I do this with my batch file?
Maybe on the pool you could change the worker's difficulty to 16.?
-Diff 16 ?
Also, I will try to run it without the pause cmd, and straight from cmd prompt and let you know what happens.
Thanks for the Replies !!
Happy Mining
March 13, 2015, 06:46:54 AM
It's seem running normally. Since the hashrate very low, there is no accepted share yet.
March 12, 2015, 09:44:44 PM
Some pools I have mined with I see the "... hiding block contents from us" often. But, shares get accepted however so, I think its safe to ignore that one. The wake notifier error I have not seen. hhmmmm...
I see you have a low hash rate. Maybe you just have not waited long enough for a share to get accepted...
Maybe on the pool you could change the worker's difficulty to 16.
Maybe try your "bfgminer -o strat....." directly from a command prompt. Bypassing your .bat and the pause. "pause" and "can't wake" might be related
I am grasping maybe but, just a thought. Worth a shot perhaps.
I see you have a low hash rate. Maybe you just have not waited long enough for a share to get accepted...
Maybe on the pool you could change the worker's difficulty to 16.
Maybe try your "bfgminer -o strat....." directly from a command prompt. Bypassing your .bat and the pause. "pause" and "can't wake" might be related
I am grasping maybe but, just a thought. Worth a shot perhaps. March 12, 2015, 06:47:27 PM
Hello, as you can see my miner is hashing, but can't get to the network I think? The main error is that annoying
"Error Trying to wake Notifier error" Along with the Hiding blocks from pool, but Ive had it working before, and now I can't get it to work anymore?
Picture of my Cmd Prompt:
http://s10.postimg.org/cha9b22ah/help.jpg
And this is my batch cmd line I am running:
bfgminer -o stratum.btcguild.com:3333 -u yunfun123_1 -p any -S \\.\COM4
pause
..
Any suggestions Would be appreciated!!
Happy Mining
"Error Trying to wake Notifier error" Along with the Hiding blocks from pool, but Ive had it working before, and now I can't get it to work anymore?
Picture of my Cmd Prompt:
http://s10.postimg.org/cha9b22ah/help.jpg
And this is my batch cmd line I am running:
bfgminer -o stratum.btcguild.com:3333 -u yunfun123_1 -p any -S \\.\COM4
pause
..
Any suggestions Would be appreciated!!
Happy Mining
Jump to: