Topic: HITLEAP ON VPS (I WILL PAY FOR THE SETUP) SOLVED! (Read 3241 times)
I know its an old thread, but if you still interested I can provide for low as $2 per hitleap viewer running and generating credits for your account.
Feel free to send me a PM if you need assistance, it looks like you're covered.
I can guide you now.
You basically have to buy a good VPN with available features like 1GB of ram and 10GB hard disk. Sometimes 512 MB ram may give you penalties on occasion which will slow you down. Unmetered bandwidth is important to estimate how much data you'll be using.
Once you have your vps, you need to set its OS to ubuntu 14.04 64bit. You may need to contact your host, but most of the time there will be a simple checkbox in your settings.
So at this point you should own a ubuntu 14.04 64bit vps. You must know your VPN's IP address, root username, and password. If you buy windows VPN you'll need putty.
Now open up terminal and type "ssh root@[your ip address]" then type in your password and after allowing the connection,
Run these commands one at a time
at the bottom of this file place the following text,
and then use ctrl+o to save then ctrl+x to exit.
Now do the reboot and then relogin only this time by using "hitleap" for your username and "123456" for your password. For mac you just run command "ssh hitleap@[ip address]"
Then run "vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565" and type out for the password "123456" and confirm if necessary
After that run the following set of commands:
After that wait for the message msi_dialog_run_message_loop Failed to create dialog L"ExitDialog" and now press ctrl+c. At this point we are pretty much done.
Now open your vnc viewer. (http://www.realvnc.com/download/viewer/)
For starting the server use "[your IP]:5901" and password 123456. Then open hitleap from your desktop, log in to your account, and start the viewer.
You can check on your hitleap about the viewers anywhere you have internet by logging into hitleap and going to the traffic exchange tab, there you will see hitleap viewers you have running or not running.
Lastly plug the VNC in and get it running.
Hope it is clear for you to understand the whole process
You basically have to buy a good VPN with available features like 1GB of ram and 10GB hard disk. Sometimes 512 MB ram may give you penalties on occasion which will slow you down. Unmetered bandwidth is important to estimate how much data you'll be using.
Once you have your vps, you need to set its OS to ubuntu 14.04 64bit. You may need to contact your host, but most of the time there will be a simple checkbox in your settings.
So at this point you should own a ubuntu 14.04 64bit vps. You must know your VPN's IP address, root username, and password. If you buy windows VPN you'll need putty.
Now open up terminal and type "ssh root@[your ip address]" then type in your password and after allowing the connection,
Run these commands one at a time
Code:
apt-get purge apache2* bind9* samba*
apt-get update
apt-get upgrade
apt-get install nano
apt-get install xorg lxde-core tightvncserver
sudo apt-get update
sudo apt-get install wine
adduser hitleap
Then type out for the password "123456" and confirm if necessary
tightvncserver :1
Then type out for the password "123456" and confirm if necessary
tightvncserver -kill :1
nano ~/.vnc/xstartup
apt-get update
apt-get upgrade
apt-get install nano
apt-get install xorg lxde-core tightvncserver
sudo apt-get update
sudo apt-get install wine
adduser hitleap
Then type out for the password "123456" and confirm if necessary
tightvncserver :1
Then type out for the password "123456" and confirm if necessary
tightvncserver -kill :1
nano ~/.vnc/xstartup
at the bottom of this file place the following text,
Code:
lxterminal &
/usr/bin/lxsession -s LXDE &
/usr/bin/lxsession -s LXDE &
and then use ctrl+o to save then ctrl+x to exit.
Now do the reboot and then relogin only this time by using "hitleap" for your username and "123456" for your password. For mac you just run command "ssh hitleap@[ip address]"
Then run "vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565" and type out for the password "123456" and confirm if necessary
After that run the following set of commands:
Code:
cd Desktop
wget -O hitleap.msi http://hitleap.com/viewer/latest
wine start hitleap.msi
wget -O hitleap.msi http://hitleap.com/viewer/latest
wine start hitleap.msi
After that wait for the message msi_dialog_run_message_loop Failed to create dialog L"ExitDialog" and now press ctrl+c. At this point we are pretty much done.
Now open your vnc viewer. (http://www.realvnc.com/download/viewer/)
For starting the server use "[your IP]:5901" and password 123456. Then open hitleap from your desktop, log in to your account, and start the viewer.
You can check on your hitleap about the viewers anywhere you have internet by logging into hitleap and going to the traffic exchange tab, there you will see hitleap viewers you have running or not running.
Lastly plug the VNC in and get it running.
Hope it is clear for you to understand the whole process
Excellent. I will try this monday.
if it works you will get a bonus :0
Please tell me how much you would charge to install it, in case it fails. never worked with WM
I get sometines an error on the vps, but that is no problem because it still runs with the error so it is 24/7 running hitleap.
Does anyone knows some other traffic exchanges?
Anyone knows how the 22hits.com surfing works?
I can guide you now.
You basically have to buy a good VPN with available features like 1GB of ram and 10GB hard disk. Sometimes 512 MB ram may give you penalties on occasion which will slow you down. Unmetered bandwidth is important to estimate how much data you'll be using.
Once you have your vps, you need to set its OS to ubuntu 14.04 64bit. You may need to contact your host, but most of the time there will be a simple checkbox in your settings.
So at this point you should own a ubuntu 14.04 64bit vps. You must know your VPN's IP address, root username, and password. If you buy windows VPN you'll need putty.
Now open up terminal and type "ssh root@[your ip address]" then type in your password and after allowing the connection,
Run these commands one at a time
at the bottom of this file place the following text,
and then use ctrl+o to save then ctrl+x to exit.
Now do the reboot and then relogin only this time by using "hitleap" for your username and "123456" for your password. For mac you just run command "ssh hitleap@[ip address]"
Then run "vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565" and type out for the password "123456" and confirm if necessary
After that run the following set of commands:
After that wait for the message msi_dialog_run_message_loop Failed to create dialog L"ExitDialog" and now press ctrl+c. At this point we are pretty much done.
Now open your vnc viewer. (http://www.realvnc.com/download/viewer/)
For starting the server use "[your IP]:5901" and password 123456. Then open hitleap from your desktop, log in to your account, and start the viewer.
You can check on your hitleap about the viewers anywhere you have internet by logging into hitleap and going to the traffic exchange tab, there you will see hitleap viewers you have running or not running.
Lastly plug the VNC in and get it running.
Hope it is clear for you to understand the whole process
You basically have to buy a good VPN with available features like 1GB of ram and 10GB hard disk. Sometimes 512 MB ram may give you penalties on occasion which will slow you down. Unmetered bandwidth is important to estimate how much data you'll be using.
Once you have your vps, you need to set its OS to ubuntu 14.04 64bit. You may need to contact your host, but most of the time there will be a simple checkbox in your settings.
So at this point you should own a ubuntu 14.04 64bit vps. You must know your VPN's IP address, root username, and password. If you buy windows VPN you'll need putty.
Now open up terminal and type "ssh root@[your ip address]" then type in your password and after allowing the connection,
Run these commands one at a time
Code:
apt-get purge apache2* bind9* samba*
apt-get update
apt-get upgrade
apt-get install nano
apt-get install xorg lxde-core tightvncserver
sudo apt-get update
sudo apt-get install wine
adduser hitleap
Then type out for the password "123456" and confirm if necessary
tightvncserver :1
Then type out for the password "123456" and confirm if necessary
tightvncserver -kill :1
nano ~/.vnc/xstartup
apt-get update
apt-get upgrade
apt-get install nano
apt-get install xorg lxde-core tightvncserver
sudo apt-get update
sudo apt-get install wine
adduser hitleap
Then type out for the password "123456" and confirm if necessary
tightvncserver :1
Then type out for the password "123456" and confirm if necessary
tightvncserver -kill :1
nano ~/.vnc/xstartup
at the bottom of this file place the following text,
Code:
lxterminal &
/usr/bin/lxsession -s LXDE &
/usr/bin/lxsession -s LXDE &
and then use ctrl+o to save then ctrl+x to exit.
Now do the reboot and then relogin only this time by using "hitleap" for your username and "123456" for your password. For mac you just run command "ssh hitleap@[ip address]"
Then run "vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565" and type out for the password "123456" and confirm if necessary
After that run the following set of commands:
Code:
cd Desktop
wget -O hitleap.msi http://hitleap.com/viewer/latest
wine start hitleap.msi
wget -O hitleap.msi http://hitleap.com/viewer/latest
wine start hitleap.msi
After that wait for the message msi_dialog_run_message_loop Failed to create dialog L"ExitDialog" and now press ctrl+c. At this point we are pretty much done.
Now open your vnc viewer. (http://www.realvnc.com/download/viewer/)
For starting the server use "[your IP]:5901" and password 123456. Then open hitleap from your desktop, log in to your account, and start the viewer.
You can check on your hitleap about the viewers anywhere you have internet by logging into hitleap and going to the traffic exchange tab, there you will see hitleap viewers you have running or not running.
Lastly plug the VNC in and get it running.
Hope it is clear for you to understand the whole process
Excellent. I will try this monday.
if it works you will get a bonus :0
Please tell me how much you would charge to install it, in case it fails. never worked with WM
I can guide you now.
You basically have to buy a good VPN with available features like 1GB of ram and 10GB hard disk. Sometimes 512 MB ram may give you penalties on occasion which will slow you down. Unmetered bandwidth is important to estimate how much data you'll be using.
Once you have your vps, you need to set its OS to ubuntu 14.04 64bit. You may need to contact your host, but most of the time there will be a simple checkbox in your settings.
So at this point you should own a ubuntu 14.04 64bit vps. You must know your VPN's IP address, root username, and password. If you buy windows VPN you'll need putty.
Now open up terminal and type "ssh root@[your ip address]" then type in your password and after allowing the connection,
Run these commands one at a time
at the bottom of this file place the following text,
and then use ctrl+o to save then ctrl+x to exit.
Now do the reboot and then relogin only this time by using "hitleap" for your username and "123456" for your password. For mac you just run command "ssh hitleap@[ip address]"
Then run "vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565" and type out for the password "123456" and confirm if necessary
After that run the following set of commands:
After that wait for the message msi_dialog_run_message_loop Failed to create dialog L"ExitDialog" and now press ctrl+c. At this point we are pretty much done.
Now open your vnc viewer. (http://www.realvnc.com/download/viewer/)
For starting the server use "[your IP]:5901" and password 123456. Then open hitleap from your desktop, log in to your account, and start the viewer.
You can check on your hitleap about the viewers anywhere you have internet by logging into hitleap and going to the traffic exchange tab, there you will see hitleap viewers you have running or not running.
Lastly plug the VNC in and get it running.
Hope it is clear for you to understand the whole process
You basically have to buy a good VPN with available features like 1GB of ram and 10GB hard disk. Sometimes 512 MB ram may give you penalties on occasion which will slow you down. Unmetered bandwidth is important to estimate how much data you'll be using.
Once you have your vps, you need to set its OS to ubuntu 14.04 64bit. You may need to contact your host, but most of the time there will be a simple checkbox in your settings.
So at this point you should own a ubuntu 14.04 64bit vps. You must know your VPN's IP address, root username, and password. If you buy windows VPN you'll need putty.
Now open up terminal and type "ssh root@[your ip address]" then type in your password and after allowing the connection,
Run these commands one at a time
Code:
apt-get purge apache2* bind9* samba*
apt-get update
apt-get upgrade
apt-get install nano
apt-get install xorg lxde-core tightvncserver
sudo apt-get update
sudo apt-get install wine
adduser hitleap
Then type out for the password "123456" and confirm if necessary
tightvncserver :1
Then type out for the password "123456" and confirm if necessary
tightvncserver -kill :1
nano ~/.vnc/xstartup
apt-get update
apt-get upgrade
apt-get install nano
apt-get install xorg lxde-core tightvncserver
sudo apt-get update
sudo apt-get install wine
adduser hitleap
Then type out for the password "123456" and confirm if necessary
tightvncserver :1
Then type out for the password "123456" and confirm if necessary
tightvncserver -kill :1
nano ~/.vnc/xstartup
at the bottom of this file place the following text,
Code:
lxterminal &
/usr/bin/lxsession -s LXDE &
/usr/bin/lxsession -s LXDE &
and then use ctrl+o to save then ctrl+x to exit.
Now do the reboot and then relogin only this time by using "hitleap" for your username and "123456" for your password. For mac you just run command "ssh hitleap@[ip address]"
Then run "vncserver :1 -geometry 1024x768 -depth 16 -pixelformat rgb565" and type out for the password "123456" and confirm if necessary
After that run the following set of commands:
Code:
cd Desktop
wget -O hitleap.msi http://hitleap.com/viewer/latest
wine start hitleap.msi
wget -O hitleap.msi http://hitleap.com/viewer/latest
wine start hitleap.msi
After that wait for the message msi_dialog_run_message_loop Failed to create dialog L"ExitDialog" and now press ctrl+c. At this point we are pretty much done.
Now open your vnc viewer. (http://www.realvnc.com/download/viewer/)
For starting the server use "[your IP]:5901" and password 123456. Then open hitleap from your desktop, log in to your account, and start the viewer.
You can check on your hitleap about the viewers anywhere you have internet by logging into hitleap and going to the traffic exchange tab, there you will see hitleap viewers you have running or not running.
Lastly plug the VNC in and get it running.
Hope it is clear for you to understand the whole process
OP , Problem Solved ? 
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Thank you for the help, but I am not able to create an account on there because I dont have those things to confirm my account.https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Do you know any cheap vps instead of a free one?
https://crowncloud.net/clients/cart.php?a=add&pid=5 BTC accepted
you can tip me here 35KsrkXLsfUNJoEEgH5Uio4geFpeGgveAQ i always need money
I prefer monthly payments, becasue if it doesn't work, then I haven't spend too much on it.
i have one unused vps so if you want to give it a try i could setup it there what would you pay for setup?
Thank to everyone else for their support and tips/tricks
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Thank you for the help, but I am not able to create an account on there because I dont have those things to confirm my account.https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Do you know any cheap vps instead of a free one?
https://crowncloud.net/clients/cart.php?a=add&pid=5 BTC accepted
you can tip me here 35KsrkXLsfUNJoEEgH5Uio4geFpeGgveAQ i always need money
I prefer monthly payments, becasue if it doesn't work, then I haven't spend too much on it.
i have one unused vps so if you want to give it a try i could setup it there what would you pay for setup?
Thank to everyone else for their support and tips/tricks
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Thank you for the help, but I am not able to create an account on there because I dont have those things to confirm my account.https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Do you know any cheap vps instead of a free one?
https://crowncloud.net/clients/cart.php?a=add&pid=5 BTC accepted
you can tip me here 35KsrkXLsfUNJoEEgH5Uio4geFpeGgveAQ i always need money
I prefer monthly payments, becasue if it doesn't work, then I haven't spend too much on it.
i have one unused vps so if you want to give it a try i could setup it there what would you pay for setup?
What sort of budget you looking for in regards to setup fruits?
I could likely do it all for you but I'm pretty busy these days.
"Time is Money Friend" -WoW Goblins.
I could likely do it all for you but I'm pretty busy these days.
"Time is Money Friend" -WoW Goblins.
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Thank you for the help, but I am not able to create an account on there because I dont have those things to confirm my account.https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Do you know any cheap vps instead of a free one?
https://crowncloud.net/clients/cart.php?a=add&pid=5 BTC accepted
you can tip me here 35KsrkXLsfUNJoEEgH5Uio4geFpeGgveAQ i always need money
I prefer monthly payments, becasue if it doesn't work, then I haven't spend too much on it.
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Thank you for the help, but I am not able to create an account on there because I dont have those things to confirm my account.https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Do you know any cheap vps instead of a free one?
https://crowncloud.net/clients/cart.php?a=add&pid=5 BTC accepted
you can tip me here 35KsrkXLsfUNJoEEgH5Uio4geFpeGgveAQ i always need money
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Thank you for the help, but I am not able to create an account on there because I dont have those things to confirm my account.https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
Do you know any cheap vps instead of a free one?
i can help you with free and then very cheap VPS
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
https://freebitcointalk.org/free-stuff/free-cloud-ssd-vps/
also could help with setup, done this before already on multiple vps's with multisurfer/com
I have found this site: https://www.vultr.com/
I can choose between many different types of CentOS 7 x64 CentOS 5 x64 CentOS 6 x64 CoreOS Stable Debian 7 x64 (wheezy) Debian 8 x64 (jessie) FreeBSD 10.2 x64 Ubuntu 12.04 x64 Ubuntu 14.04 x64 Ubuntu 15.04 x64 Ubuntu 15.10 x64 Windows 2012 R2 x64 Application Backup Custom Snapshot.
LOL this costs $0.007/hr may be you can calculate that per month and you can only run 1 hitleap account from it compare to what I offered that you can run 100 accounts for 60 days.I can choose between many different types of CentOS 7 x64 CentOS 5 x64 CentOS 6 x64 CoreOS Stable Debian 7 x64 (wheezy) Debian 8 x64 (jessie) FreeBSD 10.2 x64 Ubuntu 12.04 x64 Ubuntu 14.04 x64 Ubuntu 15.04 x64 Ubuntu 15.10 x64 Windows 2012 R2 x64 Application Backup Custom Snapshot.
Have you sent my token?
PM me with such details, because I got no understanding about vps..
I have found this site: https://www.vultr.com/
I can choose between many different types of CentOS 7 x64 CentOS 5 x64 CentOS 6 x64 CoreOS Stable Debian 7 x64 (wheezy) Debian 8 x64 (jessie) FreeBSD 10.2 x64 Ubuntu 12.04 x64 Ubuntu 14.04 x64 Ubuntu 15.04 x64 Ubuntu 15.10 x64 Windows 2012 R2 x64 Application Backup Custom Snapshot.
LOL this costs $0.007/hr may be you can calculate that per month and you can only run 1 hitleap account from it compare to what I offered that you can run 100 accounts for 60 days.I can choose between many different types of CentOS 7 x64 CentOS 5 x64 CentOS 6 x64 CoreOS Stable Debian 7 x64 (wheezy) Debian 8 x64 (jessie) FreeBSD 10.2 x64 Ubuntu 12.04 x64 Ubuntu 14.04 x64 Ubuntu 15.04 x64 Ubuntu 15.10 x64 Windows 2012 R2 x64 Application Backup Custom Snapshot.
Have you sent my token?
Hey fruits.
if you follow that link I sent you should be able to set it up yourself and save some BTC.
I read it and I am on that site now to buy those vps, but I don't get what they mean by all those settings I can choose, that is why I prefer someone else to setup it for me, or help me to set it up. U said u had servers experience, right? if you follow that link I sent you should be able to set it up yourself and save some BTC.
Hey fruits.
if you follow that link I sent you should be able to set it up yourself and save some BTC.
if you follow that link I sent you should be able to set it up yourself and save some BTC.
I have found this site: https://www.vultr.com/
I can choose between many different types of CentOS 7 x64 CentOS 5 x64 CentOS 6 x64 CoreOS Stable Debian 7 x64 (wheezy) Debian 8 x64 (jessie) FreeBSD 10.2 x64 Ubuntu 12.04 x64 Ubuntu 14.04 x64 Ubuntu 15.04 x64 Ubuntu 15.10 x64 Windows 2012 R2 x64 Application Backup Custom Snapshot.
I can choose between many different types of CentOS 7 x64 CentOS 5 x64 CentOS 6 x64 CoreOS Stable Debian 7 x64 (wheezy) Debian 8 x64 (jessie) FreeBSD 10.2 x64 Ubuntu 12.04 x64 Ubuntu 14.04 x64 Ubuntu 15.04 x64 Ubuntu 15.10 x64 Windows 2012 R2 x64 Application Backup Custom Snapshot.
I want to run a hitleap viewer on a vps, I have no experience at all with using a vps, so I wil pay someone to setup a vps for me and tell me what to do till I get it up and running, I will pay a little for someone that helps me.
Please PM or reply here if u can help me.
Please PM or reply here if u can help me.
I would be willing to extend my expertise of running servers for your project.
It could be a good solution, I will be waiting for ur PM.
Actually that might work but it is not a cheap way to get hitleap credits, I have already provided the cheapest method to get it done.
If I understand you properly, you need a lot of vps to be setup for hitleap purposes only.
Follow this steps.
Get a google cloud account.
Buy cheap google $500 coupon for $2 or there about.
set up virtual instances (RDP) as many as 100.
download hitleap viewer on each of it and run them.
Ask for my btc address if I satisfy your question.
Good luck.
Where can I get those 500$ for 2$?Follow this steps.
Get a google cloud account.
Buy cheap google $500 coupon for $2 or there about.
set up virtual instances (RDP) as many as 100.
download hitleap viewer on each of it and run them.
Ask for my btc address if I satisfy your question.
Good luck.
Do I need to install the all 100 manual, one for one? Or all together at once?
What is your btc addy???
I am sorry for this, you know that money is a powerful motivation.
1Axepx45vpTnQqxovUfuDngmgwnkPdQhpb
Thanks
I want to run a hitleap viewer on a vps, I have no experience at all with using a vps, so I wil pay someone to setup a vps for me and tell me what to do till I get it up and running, I will pay a little for someone that helps me.
Please PM or reply here if u can help me.
Please PM or reply here if u can help me.
I would be willing to extend my expertise of running servers for your project.
If I understand you properly, you need a lot of vps to be setup for hitleap purposes only.
Follow this steps.
Get a google cloud account.
Buy cheap google $500 coupon for $2 or there about.
set up virtual instances (RDP) as many as 100.
download hitleap viewer on each of it and run them.
Ask for my btc address if I satisfy your question.
Good luck.
Where can I get those 500$ for 2$?Follow this steps.
Get a google cloud account.
Buy cheap google $500 coupon for $2 or there about.
set up virtual instances (RDP) as many as 100.
download hitleap viewer on each of it and run them.
Ask for my btc address if I satisfy your question.
Good luck.
Do I need to install the all 100 manual, one for one? Or all together at once?
What is your btc addy???
If I understand you properly, you need a lot of vps to be setup for hitleap purposes only.
Follow this steps.
Get a google cloud account.
Buy cheap google $500 coupon for $2 or there about.
set up virtual instances (RDP) as many as 100.
download hitleap viewer on each of it and run them.
Ask for my btc address if I satisfy your question.
Good luck.
Follow this steps.
Get a google cloud account.
Buy cheap google $500 coupon for $2 or there about.
set up virtual instances (RDP) as many as 100.
download hitleap viewer on each of it and run them.
Ask for my btc address if I satisfy your question.
Good luck.
I do not think so hitleap run in vps, I am looking for a script where I do not find. my experience can be run in Rdp, if virtual
if there is a script I also interest too
I am sorry, but what is the difference between a vps and Rdp?if there is a script I also interest too
I am not that experienced with this, so excuse me for it..
I do not think so hitleap run in vps, I am looking for a script where I do not find. my experience can be run in Rdp, if virtual
if there is a script I also interest too
if there is a script I also interest too
Still need uncle ? i can help you for Run Hitleap on virtual machine 
Yes, I still need it, please send me a Pm with your offer Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Does hitleap allow these vps? Will they not ban my account? If yes than I will surely buy one?
Let me know
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Sir, if ever i order from you, do i need to signup new account or i can use my hitleap account?
Still need uncle ? i can help you for Run Hitleap on virtual machine
Yes, I still need it, please send me a Pm with your offer
Still need uncle ? i can help you for Run Hitleap on virtual machine
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Do you know any cheaper vps that are able to run hitleap viewer 24/7?I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Because it wouldn't be profitable I think if it cost that much? Or is that cheap for an vps?
Why linux vps?its cheaper 40% than windows vps and stable,
Tips: Dont forget to read Term of Service or Term of Usage,because some vps provider forbid traffic exchanger
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Do you know any cheaper vps that are able to run hitleap viewer 24/7?I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Because it wouldn't be profitable I think if it cost that much? Or is that cheap for an vps?
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Do you know any cheaper vps that are able to run hitleap viewer 24/7?I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Because it wouldn't be profitable I think if it cost that much? Or is that cheap for an vps?
Why linux vps?its cheaper 40% than windows vps and stable,
Tips: Dont forget to read Term of Service or Term of Usage,because some vps provider forbid traffic exchanger
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Do you know any cheaper vps that are able to run hitleap viewer 24/7?I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Because it wouldn't be profitable I think if it cost that much? Or is that cheap for an vps?
You would get minimum of 30k minutes from that.
If you would buy them it would cost like 25$ so it is profitable.
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Do you know any cheaper vps that are able to run hitleap viewer 24/7?I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
Because it wouldn't be profitable I think if it cost that much? Or is that cheap for an vps?
Are you searching for a vps or do you own one?
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
I could provide you with a rdp for about 8$ a month and I'll setup the hitleap viewer for you. Using a rdp is like using another computer remotely, there is no need to use any command lines or whatsoever. (It runs windows 2012 r2 - the UI is like Windows
I want to run a hitleap viewer on a vps, I have no experience at all with using a vps, so I wil pay someone to setup a vps for me and tell me what to do till I get it up and running, I will pay a little for someone that helps me.
Please PM or reply here if u can help me.
Please PM or reply here if u can help me.
Jump to: