you have 6 pci-e , you want more? each 8pin PCI-e "can" run a single card. Over at fleabay you might find something like this, not EXACTLY correct but you get the idea.
http://www.ebay.com/itm/Athena-Power-16-Inch-PCI-Express-6-pin-Dual-8-pin-Linear-Extension-EPCIE1628-/350577812540?_trksid=p2045573.m2042&_trkparms=aid%3D111000%26algo%3DREC.CURRENT%26ao%3D1%26asc%3D27%26meid%3D2259177951953913936%26pid%3D100033%26prg%3D1011%26rk%3D1%26sd%3D350577812540%26
this is a 6 pin to dual 6+2pin, you need an 8 to dual 6+2pin
or to go your route,
http://www.ebay.com/itm/261074032928?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Topic: How can I add 2 more PCIe slots to this PSU? (Read 1944 times)
Someone else told me the amps are different and will mess up the cards... was that bogus? I'm clueless.
Hook up your modular SATA cables then connect this to the end
http://www.compbargains.com/_e/Power_Cords/sproduct/1022338380/StarTech_com_6in_SATA_Power_to_6_Pin_PCI_Express_Video_Card_Power_Cable_Adapter.htm
http://www.compbargains.com/_e/Power_Cords/sproduct/1022338380/StarTech_com_6in_SATA_Power_to_6_Pin_PCI_Express_Video_Card_Power_Cable_Adapter.htm
That adapter doesn't work for these sockets.
Use the IDE/SATA ports, hook up the regular everyday molex connectors, then get an adapter like this one. You can probably find that adapter cheaper, but it's dead common and shouldn't be a problem to lay your hands on.
http://c773974.r74.cf2.rackcdn.com/356882_272732_01_front_zoom.jpg
I have the OCZ 1250w PSU (there's only 1 so it shouldn't be hard to look up) and there are no molex connectors.
I have the OCZ 1250w PSU (there's only 1 so it shouldn't be hard to look up) and there are no molex connectors.
Jump to: